본 연구는 민간시장의 절화 유통 현황을 조사하여 국내 절 화 시장 유통 및 판매의 기초 자료로 제공하고자 수행하였다. 조사 기간은 2022년 5월부터 10월까지이며, 민간시장 내 판 매 점포 수, 취급 품목, 수입국 및 품목 등을 비교 및 분석하 였다. 민간시장은 서울 서초구 반포동에 위치한 강남터미널 꽃시장을 대상으로 판매 품목 및 수입 국가 등을 조사하였고, 비교 대상인 공영시장의 경우 한국농수산식품유통공사 화훼 유통정보에서 제공되는 양재동 화훼공판장 거래 품목을 조사 하였다. 조사 결과, 민간시장의 월별 절화 판매 점포 수는 평 균 143개였다. 민간시장에서는 5월을 제외하고 장미 판매 매 장이 가장 많았다. 5월에는 카네이션 판매 매장이 가장 많았 으며 장미, 리시안셔스, 거베라가 그 뒤를 이었다. 민간시장 점포 내 수입 품목의 원산지는 호주, 중국, 콜롬비아, 이스라 엘, 이탈리아, 일본, 네덜란드, 페루, 남아프리카 공화국, 미 국, 베트남 등으로 조사되었다. 취급 품목은 민간시장이 69개 로 공영시장 18개에 비해 약 3.8배 많았으며, 이는 민간시장에서 수입 절화가 더 많이 유통되고 있음을 시사한다. 민간시 장은 공영시장과 달리 유통 정보를 알 수 있는 시스템이 없어 소비자들이 제품의 원산지, 품질, 가격 등을 파악하기 어렵다. 따라서, 민간시장의 절화 유통 정보를 소비자들에게 정확히 제공할 필요가 있으며, 이를 통한 투명한 거래 제공 및 소비자 의 신뢰도를 높이는 것이 중요하다.

In the nuclear fuel cycle (NFC) facilities, the failure of Heating Ventilation and Air Conditioning (HVAC) system starts with minor component failures and can escalate to affecting the entire system, ultimately resulting in radiological consequences to workers. In the field of air-conditioning and refrigerating engineering, the fault detection and diagnosis (FDD) of HVAC systems have been studied since faults occurring in improper routine operations and poor preventive maintenance of HVAC systems result in excessive energy consumption. This paper aims to provide a systematic review of existing FDD methods for HVAC systems therefore explore its potential application in nuclear field. For this goal, typical faults and FDD methods are investigated. The commonly occurring faults of HVAC are identified through various literature including publications from International Energy Agency (IEA) and American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). However, most literature does not explicitly addresses anomalies related to pressure, even though in nuclear facilities, abnormal pressure condition need to be carefully managed, particularly for maintaining radiological contamination differently within each zone. To build simulation model for FDD, the whole-building energy system modeling is needed because HVAC systems are major contributors to the whole building’s energy and thermal comfort, keeping the desired environment for occupants and other purposes. The whole-building energy modeling can be grouped into three categories: physics-based modeling (i.e., white-box models), hybrid modeling (i.e., grey-box models), and data-driven modeling (i.e., black-box models). To create a white-box FDD model, specialized tools such as EnergyPlus for modeling can be used. The EnergyPlus is open source program developed by US-DOE, and features heat balance calculation, enabling the dynamic simulation in transient state by heat balance calculation. The physics based modeling has the advantage of explaining clear cause-and-effect relationships between inputs and outputs based on heat and mass transfer equations, while creating accurate models requires time and effort. Creating a black-box FDD model requires a sufficient quantity and diverse types of operational data for machine learning. Since operation data for HVAC systems in existing nuclear cycle facilities are not fully available, so efforts to establish a monitoring system enabling the collection, storage, and management of sensor data indicating the status of HVAC systems and buildings should be prioritized. Once operational data are available, well-known machine learning methods such as linear regression, support vector machines, random forests, artificial neural networks, and recurrent neural networks (RNNs) can be used to classify and diagnose failures. The challenge with black-box models is the lack of access to failure data from operating facilities. To address this, one can consider developing black-box models using reference failure data provided by IEA or ASHRAE. Given the unavailability of operation data from the operating NFC facilities, there is a need for a short to medium-term plan for the development of a physics-based FDD model. Additionally, the development of a monitoring system to gather useful operation data is essential, which could serve both as a means to validate the physics-based model and as a potential foundation for building data-driven model in the long term.

The domestic representative nuclear fuel cycle facilities are post-irradiation examination facility (PIEF) and Irradiated Examination Facility (IMEF) at KAERI. They have regularly operated since 1991 and 1993, respectively. Due to the long period of use, the facilities are ageing, and maintenance costs are increasing every year. The maintenance methods have mainly been breakdown maintenance (BM) and partially preventive maintenance (PM). They involve replacing components that have problems through periodic inspections by on-site inspectors. However, these methods are not only uncertain in terms of replacement cycles due to worker’s deviation on the inspection results, but also make it difficult to respond accidents developed through failures on the critical equipment that confines radioactive material. Therefore, an advanced operation and maintenance studied in 2022 through all of nuclear facilities operated at KAERI. Advancement strategy in four categories (safety, sustainability, performance, innovativeness) was analyzed and their priorities according to a facility environment were determined so a roadmap for advanced operation and maintenance could be developed. The safety and sustainability are higher importance than the performance and innovativeness because facilities at KAERI has an emphasis on research and development rather than industrial production. Thus, strategy for advancement has focused even more on strengthening the safety and sustainability. To enhance safety, it has been identified that immediate improvement of aged structures, systems, and components (SSCs) through large-scale replacement is necessary, while consideration of implementing an ageing management program (AMP) in the medium to long term is also required. Facility sustainability requires strengthening operation expertise through training, education, and cultivation of specialized personnel for each system, and addressing outstanding regulatory issues such as approval of radiation environment report on the nuclear fuel processing facilities and improvement work according to fire hazard analysis. One of the safety enhancement methods, AMP, is a new maintenance approach that has not been previously applied, so it had to be thoroughly examined. In this study, an analysis was conducted on the procedure and method for introducing an AMP. An AMP for nuclear fuel cycle facilities was developed by analyzing the AMP applied to the BR2 research reactor in Belgium and modifying it for application to nuclear fuel cycle facilities. The ageing management for BR2 has the objective to maintain safety, availability and cost efficiency and three-step process. The first step is the classification of SSCs into four classes to apply graded approach. Secondly, ageing risk is assessed to identify critical failure modes, their frequency and precursors. Final step involves defining measures to reduce the ageing risk to an acceptable level in order to integrate the physical and economic aspects of ageing into a strategy for inspection, repair, and replacement. Similar approach was applied to the nuclear fuel cycle facility. Firstly, the SSCs of nuclear fuel cycle facilities have been classified according to their safety and quality classifications, as well as whether they are part of the confinement boundary. The SSCs involved in the confinement boundary were given more weight in the classification process, even if they are not classified as safety-class. A risk index for ageing was introduced to determine which prevention and mitigation measure should be chosen. By multiplying the health index and the impact index, the ageing risk matrix provides a numerical score that represents guidance on the prevention and mitigation of ageing effect. The health index is determined by combining the likelihood of failure and engineering evaluation of the current condition of SSCs, whereas the impact index is calculated by taking into account the severity of consequences and the duration of downtime resulting from a failure. This ageing management has to be thoroughly reviewed and modified to suit each facility before being applied to nuclear fuel cycle facilities.

기후 변화의 가속화로 국내 제주 및 남부 지방을 중심으로 열대 및 아열대 작물의 재배 및 소비가 증가하는 추세이다.오크라는 식용적 가치가 있을 뿐만 아니라, 품종별 고유의 꼬 투리와 잎의 색은 관상적 가치가 있어 조경 식물로 많이 사용 되고 있다. 본 연구는 도심 내 옥상 온실에 관상식물인 오크 라를 도입하기 위해 피트모스와 펄라이트 비율에 따른 기초 종자 발아 및 육묘기 실험을 진행하였다. 피트모스와 펄라이 트 비율은 PT:PL=1:2, 1:1, 2:1, 4:1 네 가지로 조성하였다. 발 아율은 파종 후 7일차부터 다른 처리구에 비해 피트모스:펄라 이트=1:2의 처리구에서 가장 높았다. 파종 후 28일차와 70일 차에 줄기길이, 경경, 뿌리길이, 지상부와 지하부의 생체중과 건물중 그리고 엽면적은 피트모스:펄라이트=1:2 처리구에서 가장 높았다. 그러나, 파종 후 56일 이후부터 엽수는 피트모 스:펄라이트=1:2, 2:1, 4:1 처리구에서 감소하였다. 피트모스: 펄라이트=1:1, 2:1, 4:1 처리구에서 식물이 필요로 하는 피트 모스의 비율이 지나치게 높아 높은 피트모스 비율로 인하여 수분함수량이 과도하게 높아 식물이 고사한 것으로 판단된다. 따라서 오크라를 관상식물로 활용하기 위해서는 피트모스와 펄라이트를 1:2로 혼합한 배지가 가장 적합하다.

PURPOSES : Almost every design method for airport concrete pavements considers only traffic loading and not environmental loading. This study proposes a mechanistic design method for airport concrete pavements, that considers both environmental and traffic loading simultaneously. METHODS: First, the environmental loading of concrete pavements in Korean airports was quantified. FEAFAA, a finite element analysis program for airport pavements, was used to calculate the maximum tensile stress (MTS) of the slab, caused by both environmental and traffic loadings. The factors that influence the MTS were identified via sensitivity analysis, and an MTS prediction model was developed using the statistical analysis program SPSS. The ratio of MTS to the tensile strength of slab was calculated using the prediction model. The fatigue model under the AC 150/5320-6E and AC 150/5320-6F standards of the FAA was corrected to make it suitable for the predicted stress-strength ratio. RESULTS : The MTS prediction model and corrected fatigue model were used to redesign the slab thickness and joint spacing of airport concrete pavements originally designed using the AC 150/5320-6D standard, which empirically considers traffic loading only. As a result, different slab thicknesses and joint spacings were redesigned with consideration for environmental loading, specifically the weather conditions of airports. . CONCLUSIONS: The slab thickness and joint spacing can be mechanistically designed at the same time, whereas previously, only the slab thickness was designed, and the joint spacing was determined empirically.

Several properties related to longevity and reproduction of O. scapulalis adults were investigated on nine constant temperatures (13, 16, 19, 22, 25, 28, 31, 34 and 36℃). Thirty mating pairs on each temperature were separately prepared on the emerged days of adults, supplied with distilled water and 10% sucrose solution in small plastic cages, and observed every day. The adults could not produce fertile eggs on 13 and 36℃. The highest mating rate (ca. 47%) was observed on 19℃, and the lowest mating rate (3.3%) on 34℃. The mean longevity of mated female was observed in the range from ca. 9 to 52 days, while that of male was in the range from 10 to 31 days. The mean pre-oviposition period was longest (ca. 16 days) on 16℃ and shortest (ca. 3 days) on 31℃. The oviposition period was longest (ca. 16 days) on 19℃ and shortest (ca. 3 days) on 34℃. The low fecundity (ca. 22∼25 eggs/pair) was observed on 16 and 34℃, while 147∼416 eggs per pair were produced in other temperatures. The production pattern of fertile eggs on each temperature was analyzed. Fifty percent of production of fertile eggs was observed most rapidly on 3-day-old female at 28℃. In this study, a few properties of the mated adults were compared to those of the unmated one. Finally a few models were adopted to generalize some properties.

The adzuki bean borer, Ostrinia scapulalis (Lepidoptera: Crambidae), is one of serious insect pests against the red bean, Vigna angularis. Adult emergence, mating and oviposition behaviors of the insect were investigated in a constant condition of 25±1℃, 15L:9D (light: dark) photoperiod, and 60±10% relative humidity, for the purpose of collecting fundamental data for elucidation of adult biology and female sex pheromone. The circadian rhythmic behaviors were observed at 30-min interval during the experiments, and the data was analyzed at one-hour interval. Adult emergence was observed for 15 hours from 2 hours before lights-off to 4 hours after lights-on in a row, and ca. 90% emerged in scotophase. Adults did not mate within the emerged scotophase and the following photophase. Mating was observed only in the scotophase, and ca. 95% of mating occurred for 5 hours from 2 hours after lights-off to 2 hours before lights-on. The result was different from the main mating time in the previous reports. Mean mating rate at 0- to 4-day-old pairs was ca. 50%. It took almost one day from mating to oviposition, but oviposition 2 days after mating was observed in 0-day-old adult pairs. Adult pairs older than 7-day-old could not mate.

Apolipophorin-III (apoLp-III) is a hemolymph protein whose function is to facilitate lipid transport in an aqueous medium in insects. Recently, apolipophorin-III in Galleria mellonella and Hyphantria cunea was shown to play an unexpected role in insect immune activation. We show here a novel possible function/role of the apoLp-III in insects. To investigate the genes which have a relationship with apoLp-III in fall webworm larvae, we reduced endogenous Hc apoLp-III mRNA levels in larvae via RNA interference (RNAi). The RNAi-mediated Hc apoLp-III reduction resulted in the reduction of antioxidants, like MnSOD, catalase, and glutathione S transferase as well as immune proteins. In particular, expression of MnSOD commonly decreased in fat body, midgut, and hemocytes following the knockdown of Hc apoLp-III, which induced an elevated level of superoxide anion in Hyphantria cunea larvae. The observed effect of Hc apoLp-III RNAi suggests that Hc apoLp-III is related to the action/expression of antioxidants, especially MnSOD.

A new insect member of the STAT family of transcription factors (HcSTAT) has been cloned from the lepidopteran, Hyphantria cunea. The domain involved in DNA interaction and the SH2 domain are well conserved. The gene is transcribed at a low level during all stages of development, and transcribed in hemocyte, fat body, midgut, epidermis, and Malpighian tubule. Especially, hemocyte and Malpighian tubule showed transcriptional activation of HcSTAT upon Gram-negative and -positive bacteria challenge. Gram-negative and -positive bacteria challenge specifically results in nuclear translocation of HcSTAT protein and induction of DNA-binding activity that recognizes a STAT target site in H. cunea hemocyte. In vivo treatment with sodium orthovanadatetranslocates HcSTAT to the nucleus in hemocyte cells.

Reactive oxygen species (ROS) is toxic to living organisms, because its high reactivity causes oxidative damage to proteins, nucleic acids, and lipids. Superoxide dismutase (SOD) is an enzyme facilitating the removal of superoxide anions from living organisms. This study focused on the cloning of MnSOD cDNA from Hyphantria cunea and its induction upon bacterial infection and various stresses. The open reading frame of MnSOD is composed of 645 bp, encoding 215 amino acid residues. The theoretical molecular mass and pI of putative MnSOD was evaluated to be 24276 Da and 9.14, respectively. The MnSOD from H. cunea is highly similar to human MnSOD (59.5%) as well as Bombyx mori MnSOD (76.2%). MnSOD showed no big induction upon bacterial infection and stresses, compared to that of Cu/ZnSOD.

Apolipophorin-Ⅲ (apoLp-Ⅲ) is a hemolymph protein whose function is to facilitate lipid transport in an aqueous medium in insect. Recently, apolipophorin-Ⅲ in Galleria mellonella and Hyphantria cunea was shown to play an unexpected role in insect immune activation. We show here a novel possible function/role of apoLp-Ⅲ in insects. To investigate the genes which have a relationship with apoLp-Ⅲ in fall webworm larvae, we reduction of endogenous Hc apoLp-Ⅲ mRNA levels in larvae via RNA interference (RNAi). The RNAi-mediated Hc apoLp-Ⅲ reduction resulted in the reduction of antioxidants, like MnSOD, catalase, and glutathione S transferase as well as immune proteins. In particular, expression of MnSOD commonly decreased in fat body, midgut, and hemocytes following the knockdown of Hc apoLp-Ⅲ, which induced an elevated level of superoxide anion in H. cunea larvae. The observed effect of Hc apoLp-Ⅲ RNAi suggests that Hc apoLp-Ⅲ is related to the action/expression of antioxidants.

Innate immunity responses are triggered by the immune challenge and therefore involve signaling processes. The cellular response is initiated by hemocytes and mainly involves phagocytosis and encapsulation of intruders by these cells. To address whether Hc-STAT is activated upon bacterial challenge, we examined the subcellular location of STAT protein in hemocyte by immunostaining. A new insect member of the STAT family of transcription factors (Hc-STAT) has been cloned from the lepidopteran, Hyphantria cunea. The domain involved in DNA interaction and the SH2 domain are well conserved. The gene is transcribed at a low level during all stages of development, and the protein is present in hemocytes, fat body, midgut, epidermis, and Malphigian tuble (Mt). Especially, hemocytes and Mt showed transcriptional activation of Hc-STAT upon Gram (-) bacteria and fungal challenge. Gram (-) bacteria and fungal challenge specifically results in nuclear translocation of Hc-STAT protein and induction of DNA-binding activity that recognizes a STAT target site in H. cunea hemocyte. In vitro treatment with pervanadate translocates Hc-STAT to the nucleus in hemocyte cells. Here we report the first evidence for the involvement hemocyte JAK/STAT pathway upon microbial infection in lepidopteran insect.

The injury of red bean (Vigna angularis) by the legume pod borer, Maruca vitrata (Lepidoptera: Pyralidae), was evaluated through an artificial inoculation experiment in cages randomly arranged in a field. Virgin adult pairs (0, 1, 2, 4 and 8) were released into screen-nets at the flowering stage of red bean, and the damage was investigated at harvest. Any insecticides were not sprayed through all plant-growing season. The absolute number of uninjured pod in a net showed a decreasing tendency according to the increase of the number of released adult pairs, but did not show a statically significant difference among treatments. The total production (number of pod and seed) of red bean was highly variable even in a treatment. The variation seemed to be caused by pre-infestation by M. vitrata and other insect species before netting. Instead, therefore, relative damage was compared among treatments. The total ratio of injured pod in a net increased according to the released adult number. The result clearly indicated that the mating ratio and fecundity within the screen-net also increased according to the number of released pairs and that the hatched larvae affected the damage. The corrected rate for pod injury at 8 pair release was about 46%. On the other hand, the ratio of injured seed per injured pod was about 80% regardless of treatments. The result suggested that one pod continuously be attacked till almost disappearance of itself.