Recently, halogen lamps for vehicle exterior lamp systems are being replaced by LEDs (Light Emitting Diode) in consideration of miniaturization, power consumption, life, luminance, and eco-friendliness. Due to regulations on the amount of light required, luminance, light uniformity, and glare prevention, it is required to develop a light guide for controlling a light source of an LED lamp for a vehicle. For the development of the light guides, the development of machining technology that can cut micro patterns of hundreds of micrometers scale into surface roughness of tens of nanometers scale must be preceded. In this study, the effect of variations in cutting conditions on surface roughness was analyzed through experiments. The micro patterns was manufactured by cutting into STAVAX material, and the surface of the micro patterns was super-finished using a ball-shaped PCD (polycrystalline diamond) tool without flutes. In experiments, the cutting conditions of the super-finishing process were varied, and the varied cutting conditions were feed rate, radial depth of cut, and spindle speed

In Korea, five major ports have been designated as sulfur oxide emission control areas to reduce air pollutant emissions, in accordance with Article 10 of the “Special Act on Port Air Quality” and Article 32 of the “Ship Pollution Prevention Regulations”. As regulations against vesseloriginated air pollutants (such as PM, CO2, NOx, and SOx) have been strengthened, the Ministry of Oceans and Fisheries(MOF) enacted rules that newly built public ships should adopt eco-friendly propulsion systems. However, particularly in diesel–electric hybrid propulsion systems,the demand for precise control schemes continues to grow as the fuel saving rate significantly varies depending on the control strategy applied. The conventional Power Take In–Power Take Off(PTI–PTO) mode control adopts a rule-based strategy, but this strategy is applied only in the low-load range and PTI mode; thus, an additional method is required to determine the optimal fuel consumption point. The proposed control method is designed to optimize fuel consumption by applying the equivalent consumption minimization strategy(ECMS) to the PTI–PTO mode by considering the characteristics of the specific fuel oil consumption(SFOC) of the engine in a diesel–electric hybrid propulsion system. To apply this method, a specific fishing vessel model operating on the Korean coast was selected to simulate the load operation environment of the ship. In this study, a 10.2% reduction was achieved in the MATLAB/SimDrive and SimElectric simulation by comparing the fuel consumption and CO2 emissions of the ship to which the conventional rule-based strategy was applied and that to which the ECMS was applied.

지구온난화 및 대기오염 등 환경문제에 대한 관심이 대두되면서 국제해사기구의 선박 대기오염물질 배출 규제 및 협약이 채택 되었으며, 최근 국내에서는 항만지역 등 대기질의 개선에 관한 특별법안이 제정되어 미세먼지 발생량을 줄이고자 다방면으로 노력하고 있다. 이러한 미세먼지 저감대책의 일환으로 노후화된 연안선박의 디젤엔진을 미세먼지 및 배출가스가 없는 배터리 전기추진시스템으로 전환하는 것에 대한 타당성 조사가 활발히 진행되고 있다. 배터리 전기추진시스템은 연료의 연소로 인한 배기가스의 발생이 없으며, 신재 생에너지원의 적용이 용이하므로 유럽이나 미국과 같은 선진국에서는 수년전부터 신재생에너지를 적용한 배터리 전기추진시스템이 적용 된 소형연안여객선이 운항 중이나 국내에서는 전무하다. 따라서 본 연구에서는 국내 소형연안여객선을 대상선박으로 선정하여 태양광 발 전시스템이 연계된 배터리 전기추진선박의 적용 여부에 대해 시뮬레이션을 하였으며, 그에 따른 결과를 바탕으로 배터리 전기추진선박의 적용가능성을 확인하고자 한다.

해양구조물에 전기 안전사고가 급증하면서 전력시스템 고조파 분야가 최근 많은 관심 받고 있다. 이것은 주로 비선형 (또는 고조파 생성) 부하가 일반적인 산업플랜트 전력시스템에서 계속 증가되고 있기 때문이다. 해양플랜트에서는 전력시스템의 안전설계로 인하여 고조파 문제의 발생률은 낮지만, 고조파 문제에 대한 인식은 전력시스템 설계의 신뢰성을 향상시키는데 여전히 도움이 될 수 있다. 전력시스템에 고조파 문제가 드물게 발생되는 경우, 이는 생성된 고조파의 크기 혹은 전력시스템의 공진 때문이다. 이 고조파 비교분석에 관한 연구는 전력부하를 고려한 부유식 액화천연가스 생산·저장·하역 (FLNG) 설비의 하역 운전 시나리오에 대한 전기적인 구성으로 비교분석하였다. 전기적인 네트워크 구성은 전기적인 네트워크 부하 흐름에서 볼 수 있다. 본 연구는 해양플랜트 전력시스템의 안전을 보장하기 위해 전기 모터 시스템의 고조파 효율에 초점을 맞추어 전력시스템 성능을 시뮬레이션을 통해 검증하였다. 또한, 본 연구의 설계분야에서도 운전 및 유지·보수의 향상시키기 위해 FLNG 설비의 전력시스템을 분석하였다.

This paper aims at presenting bunkering educational programs for LNG fueled ship taking into consideration existing similar education programs and safety systems at the international level in order to enhance both seafarers' and vessels' safety. Heavy fuel oil has typically been used as fuel of ship propulsion. The competitiveness of the fuel oil is recently getting weak in terms of cost and environmental aspects. Liquefied natural gas is introduced for ship propulsion in the maritime field as a new energy source replacing heavy fuel oil. In order to prepare for installation and operation of LNG fueled propulsion ship on board, International Maritime Organization has discussed this subject for about 10 years. As a result of the discussion on such ships in IMO, the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels entered into force on the year 2015. International organizations and several countries therefore drives actively entire researches and other businesses with a view to providing equipment and system of LNG bunkering. The systems are divided into ship-to-ship transfer, terminal / pipeline-to-ship transfer and truck-to-ship transfer. By adopting transfer system of LNG bunkering, many human resources will be needed in these areas on scene as well as on managing, operating, trading, finance, design of LNG bunkering industries. LNG bunkering is just in the beginning stage. Hence, this paper reviews and proposes professional educational programs of LNG bunkering in consideration of technical aspects of the safety system of LNG bunkering based on the types of bunkering systems.

This paper presents a novel educational model of subjects of electric, electronic and control for marine engineer in accordance with STCW 2010 amendments. In accordance with STCW 2010, contents of such courses in marine engineering operations of undergraduate programs in maritime university should be updated correspondingly to new features. In order to propose the model, this paper analyses and reviews subjects on electric, electronic and control in STCW convention compared to STCW 1995. Also, in this paper, subjects of electric, electronic and control in marine engineering operations in Korea and other countries are analyzed and a new educational model is proposed. in theoretical perspective and practical perspective.

This paper provides a study on the application and proposals of safety culture, new public management and social amplification of risk framework via ship accidents in Korea. This document analyzes what are the concept of safety culture, new public management as well as social amplification and risk framework and describes how 3 issues act, harmonize, interrelate through M/V Sewol accident. Korean government is needed to apply social amplification of risk framework to the in order to promote the safety culture in the maritime administration. Hence, this paper proposes safety framework in order to prevent and resolve future unexpected accident especially for maritime field.