수염풍뎅이(Polyphylla laticollis manchurica)는 과거에는 흔히 발견되었으나, 1970년대 이후 한반도 내 개체수 가 급격히 감소하여 2005년 환경부에 의해 멸종위기 야생생물 Ⅰ급으로 지정되었다. 또한 해당종의 분자생물학적 연구는 멸종위기종이라는 특성으로 인해 제한적으로 진행되었다. 그로 인해 NCBI 등 공공 데이터베이스에서 제공되는 서열정보들 또한 부족한 실정이다. 이 연구는 이러한 한계를 극복하고 수염풍뎅이의 유전적 특성을 규명하기 위해 생물정보학적 기술을 활용하여 전사체 분석을 진행하였다. Illumina HiSeq 2500 플랫폼을 사용하여 53,433,048개의 RNA reads를 얻었으며, Trinity와 TGICL을 이용한 De novo 어셈블리 분석을 통해 18,172개의 unigenes를 생성하였다. 생성된 unigenes는 GO, KOG, KEGG, PANM DB를 활용하여 annotation을 진행하였다. 그 결과, GO 분석에서는 ‘binding and catalytic activities’와 관련된 항목이 높은 발현을 보였으며, KOG 분석의 경우 ‘Cellular Processes and Signals’ 범주가 높은 비율을 나타내었다. KEGG 분석을 통해 2,118개의 unigenes가 metabolic 카테고리에 annotation된 것을 확인하였다. SSR 모티프 분석에서는 AT/AT (42.90%) 모티프, AAT/ATT (13.13%) 모티프 순으로 많이 나타나는 것을 확인하였다. 이 연구를 통해 분석한 결과 들을 이용하여 유전자원 및 종 정보를 실시간 제공 및 정보 공유가 가능하도록 Database 및 web-interface를 구축하 였으며, 이러한 자료들은 국내 멸종위기종인 수염풍뎅이의 고유한 유전적 특성을 발굴 및 확보할 수 있는 기반자 료로써 활용될 수 있을 것으로 사료된다.
지속적인 기후변화로 인해 매개 곤충을 통한 다양한 신종감염병이 국제적으로 확산되고 있으며, 발생빈도 또한 증가하는 추세이다. 이러한 매개질병을 관리하기 위해서는 질병을 매개하는 매개체에 대한 정보와 지속적 인 모니터링이 필요하다. 이 연구는 제3급 법정 감염병으로 지정된 중증열성혈소판감소증후근(Severe Fever with Thrombocytopenia Syndrome, SFTS) 및 라임병(Lyme disease) 등의 매개체로 알려져 있는 참진드기를 대상으로 충남 당진 일대에서 2018년부터 2023년까지 총 6년, 4월-11월의 기간동안 월 1회 4개의 환경(무덤, 산길, 잡목림, 초지)에서 드라이아이스 유인트랩을 사용하여 발생밀도를 조사하였다. 그 결과 2018년 16,996마리, 2019년 16,698마리, 2020년 6,417마리, 2021년 7,380마리, 2022년 3,451마리, 2023년 3,465마리로, 총 54,407마리가 채집되 었으며, 초지에서 가장 많이 채집되었다. 채집된 참진드기는 2속 3종으로 작은소피참진드기(Haemaphysalis longicornis), 개피참진드기(H. flava), 일본참진드기(Ixodes nipponensis)이며, 작은소피참진드기 (H. longicornis) 가 42,489마리(78.09%)로 높은 우점도를 보였으며, SFTS 보유 여부를 확인하기 위해 RNA 추출 및 Nested RT-PCR 단계를 걸쳐 전기영동을 수행하였으나 양성 검체는 0건으로 확인되었다. 이러한 연구 결과는 SFTS의 주요 매개 체인 참진드기 발생 양상 파악 및 매개 질병 관리 전략 수립에 기초 자료로서 활용될 수 있을 것으로 사료된다.
국립기상연구소의 보고에 의하면 최근 한반도의 기온 상승으로 인해 온대내륙성 기후형에 속했던 지점은 온대해양성 기후형으로, 온대해양성 기후형은 아열대습윤 기후형으로 변화하고 있다. 이러한 한반도의 기후 변화는 환경 변인에 민감한 질병 매개 곤충의 분포와 밀도 변화에 영향을 미칠 수 있어 지속적인 모니터링이 중요하다. 이 연구는 철새도래지 내 발생 및 유입될 수 있는 모기와 관련 바이러스 감염률을 확인하기 위해 충남 당진의 철새도래지에서 BG-sentinel trap 및 LED trap을 사용하여 2021년부터 2023년까지 4-11월간 월 2회 수행하 였다. 채집된 모기는 총 3,723마리로, 4속 16종을 확인하였다. 그 중 금빛숲모기 (Aedes (Aedimorphus) vexans nipponii) 가 1,711마리(45.96%)로 가장 높은 우점도를 나타냈으며, 흰줄숲모기 (A. (Stegomyia) albopictus) 와 큰검 정들모기 (Armigeres (Armigeres) subalbatus) 각각 588마리(15.79%), 빨간집모기 (Culex (Culex) pipiens pallens) 269마리(7.23%)로 나타났다. 채집된 모기의 Flavi-virus 감염 여부를 확인하기 위해 RNA 추출 및 RT-PCR을 통해 확인하였으나, 모두 음성으로 확인되었다. 이러한 연구 결과들은 기후변화에 맞추어 변화하는 감염병 매개 모기 의 발생 현황을 감시·예측하는데 유의한 자료로 활용될 수 있으며, 향후 모기 매개 질환 발생을 예측하기 위한 기초 자료로 활용될 수 있을 것으로 사료된다.
털진드기 유충 (Acari: Trombiculidae)은 쯔쯔가무시증을 전파하는 주요 매개체이다. 털진드기 유충의 발생량 은 가을철에 증가하는 것으로 알려져 있지만, 환경 및 시기에 따라 발생 패턴이 다르게 나타날 수 있어 각 지역에 대한 조사가 필요하다. 이 연구는 충남 예산의 털진드기 발생 양상을 확인하기 위해 2017년부터 2023년까지 36-51 주차 (9-12월)에 걸쳐 현장 조사를 수행하였다. 논, 밭, 수로, 초지에 5m 간격으로 털진드기 트랩을 환경별로 5개씩 설치하여 채집하였다. 그 결과 총 3,257개체로 2017년 1,104마리, 2018년 785마리, 2019년 650마리, 2020년 160마 리, 2021년 139마리, 2022년 233마리, 2023년 186마리 채집되었다. 동정 결과 5속 12종이 확인되었으며 둥근혀털 진드기(Neotrombicula tamiyai)가 1,882개체(57.78%)로 우점도가 가장 높게 나타났다. 이러한 발생 양상에 관한 연구는 매개 질환의 예방 및 관리 전략 수립에 있어 중요한 기초 자료로 활용될 수 있으므로 지속적인 연구와 모니터링이 필요할 것으로 사료된다.
In this study, a smart bench was developed and researched smart benches that can contribute to user convenience and satisfaction by installing them in parks, bus stops, and tourist attractions in line with the rapidly changing construction of smart cities. The smart bench is automatically operated by the control system according to the external temperature and provides additional functions such as charging, lighting, and advertising to improve general bench functions as well as heating in winter and cooling in summer, making it suitable for smart urbanization. The developed smart bench is designed to be strong enough to withstand loads of about 2,500 N. It minimizes the visible parts such as assembled bolts and 220V power supply wires, It can also give aesthetic effects. The development was carried out with the aim of waterproofing and dustproofing of IP44 grade in accordance with the climate of Republic of Korea, which has four seasons, and it is advantageous for long-term use because the paint was selected for the weather ability (discoloration) grade 3 or higher. If smart bench is commercialized, it is believed that various options can be provided to the smart bench market, where buyers had few product options, as the parts were developed in an assembled type so that all functions can be responded in an optional form according to the installation environment and the buyer's budget.
Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.
Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.
In the current study, a total of 102 common Todarodes pacificus squid caught in the East Sea were investigated for parasitological research. The results revealed that 33 (32.35%) out of 102 squid were infected by Nybelinia surmenicola, the mean intensity was 5.58 parasites per squid, and the maximum abundance was 11. Morphological analysis using a field emission scanning electron microscope showed the characteristic features of N. surmenicola. Molecular identification based on the 28S rRNA gene confirmed the isolated parasite as N. surmenicola, while phylogenetic analysis revealed that N. surmenicola isolated in this study was clustered with N. surmenicola isolated from Japan. This is the first report of phylogenetic characterization of N. surmenicola isolated from Korea.
The purpose of this study is to improve practical skill evaluation method of mushroom - trained certified technician's practical skill evaluation which is one of national qualification tests based on national incompetency standards. One of the current National Competency Standards (NCS), mushroom - trained certified technician uses NCS based practical assessment method. In order to improve the current practical evaluation method, we try to improve practical evaluation method based on field customized problem solving ability and improve the practical evaluation method, various evaluation methods should be constructed. On the purpose of identify the diversity and problems of the evaluation method, the experts of the group consultation, the mushroom-related research institute and the related industry collaborated to identify the problems of the actual mushroom - trained certified technician practicum test, This study on the evaluation improvement method was carried out. In this study, the contents of practical test of the current mushroom traits were analyzed and the trends of the latest mushroom industry were widely reflected.
This study is investigated the growth characteristics(number of available stipe, pileus diameter, pileus thickness, stipe length, stipe thickness, object weight, comparison yield ability of 1 cycle) and storage characteristics of ‘Sanjo 701’ (S7) cultivars according to relative humidity. The S7 growth characteristics were investigated by quantifying the growth and the characteristics according to the relative humidity, The storage stability was investigated every 5 days and freshness was measured by ‘Minamide Method’. S7 pileus diameter is The higher the relative humidity was confirmed becomes larger and the more increased relative humidity also increase the comparison yield ability of 1 cycle. However, pileus diameter or stipe length This could not see the big difference in the three treatment groups, the plieus thickness was no significant difference in the treatment of 80% and 95%. The fresh weight of S7 decreased significantly at 80% and 95% relative humidity after 10 days of storage, but decreased continuity in 65% humiditiry. The elongation percentage of S7 pileus was observe in 95% relative humidity, values of L, a and b (SCI), showed the highest L value in 65% and the a value in 95%. b values were similar in 65%, 80% and 95% treatments. On the ‘Minamide Method’ measure freshness was changed from the 10th day of storage at relative humidity of 95%, but humidity of 65% and 80% treatments, it changed after 15 days of storage. In this study growth characteristics and yield were increased at higher relative humidity, but storage stability was decreased. Therefore, it is deemed necessary to change the relative humidity to produce high quality mushrooms.