Potato tuber moth (PTM) is a primary pest of potato which had invaded into Korea in 1968 and its distribution was restricted in the southern part of the peninsula. Possibly due to the climate change, its distribution expanded toward the North including Gyounggi and Gangwon province. Since this pest also can inflict damage on other solanaceous crop like tobacco and tomato, we tested the possible host expansion and damage potential on the varieties of tomato. A day old larvae were inoculated to three commercial varieties of a tomatoes and a potato. The results showed that PTM could survive and reproduce on tomato leaves or fruits with differential performance on the varieties. Development time for a day old larvae took longest in leaves of 3 months old plant than of one months old plant of tomatoes. PTM showed lowest reproduction on the leaves of variety with significantly higher type-VI trichome density/mm2. When fed with fruits of tomatoes PTM performance was low in terms of biological parameters in small sized cherry tomatoes than big normal size tomatoes. Significantly high survival rate was observed in the large sized fruit of tomato verities than small sized. This led to further discuss the importance of fruit size and the glycoalkoloid which is present in high level in cherry type tomatoes. Further work on resistance with more tomato accessions are necessary to know wider resistance variability in Korea.

Oxalic acid has a nematicidal activity against the root-knot nematode Meloidogyne incognita. High producer of oxalic acid was isolated, and then named as Aspergillus niger F22. Oxalic acid production was investigated under various temperatures from 20 – 33oC and rotational speeds in 5 L jar fermenters. Yield of oxalic acid increased with decreasing temperature. The highest yield was obtained at 23oC, showing the yield of oxalic acid of 8.7 g/L, whereas oxalic acid production was least at 33oC. At 20oC, the yield was lower than that of 23oC. At a rotational speed of 300 rpm, serious oxygen depletion was present from 48 - 72 h, resulting in low productivity of 26.2 mg /L·h. When a rotational speed was set at 600 rpm, dissolved oxygen tension was over 40% and oxalic acid production increased up to approximately 55%. Viscosity during the culture differed with temperatures. Viscosity increased with the increment of temperatures. When A. niger F22 was cultured at 23oC, viscosity was 810 cP, which was favorable for oxalic acid production.

Biological control has been tried for integrated pest management. It is often comparable, safe, and environment-friendly, making itself an alternative for chemical agents. Filamentous microorganisms, i.e., fungi and streptomystes, produce many kinds of useful metabolites, and some of them have been developed as a biocontrol agent. However, they still have a long way because of the concern of manufacturing cost. Therefore, process development was intensively studied to meet cost-effectiveness. Operating conditions of bioreactor, e.g., agitation and aeration, had an effect on biological and physiological responses such as mycelial morphology, oxygen and nutrient transfer. Understanding relationship between operating parameters and microbial responses in terms of growth, substrate and oxygen consumption, and production yield was critical for process development. This study dedicated to build strategies for mass production of biological control agent using aerobic filamentous microorganisms.

The effects of coating thickness on the delamination and fracture behavior of thermal barrier coating (TBC) systems were investigated with cyclic flame thermal fatigue (FTF) and thermal shock (TS) tests. The top and bond coats of the TBCs were prepared by electron beam-physical vapor deposition and low pressure plasma spray methods, respectively, with a thickness ratio of 2:1 in the top and bond coats. The thicknesses of the top coat were 200 and 500 μm, and those of the bond coat were 100 and 250 μm. FTF tests were performed until 1140 cycles at a surface temperature of 1100 oC for a dwell time of 5 min. TS tests were also done until more than 50 % delamination or 1140 cycles with a dwell time of 60 min. After the FTF for 1140 cycles, the interface microstructures of each TBC exhibited a sound condition without cracking or delamination. In the TS, the TBCs of 200 and 500 μm were fully delaminated (> 50 %) within 171 and 440 cycles, respectively. These results enabled us to control the thickness of TBC systems and to propose an efficient coating in protecting the substrate in cyclic thermal exposure environments.

This study was conducted to examine the occurrence characteristics of pine trees infected by pine wood nematode in Gyeongsangbuk-do, Korea. Based on the GPS coordinate data of the infected trees at Yeongdeok-gun from 2013 to 2014 and at Andong-si in 2014, nearest neighbor analysis was conducted to analyze nearest distance between the infected trees. And the influence of geographical factors such as altitude, slope, and the distance from the road on the position of infected trees were identified. Our results showed that over 60% of the newly infected trees were found within 50m of the trees infected in previous year. Over 70% of infected trees occurred below 100m altitude in Yoeongdeok-gun whereas less 32% of total pine trees distributed below the altitude. 98% of the infected trees and 74% of total pine trees in Andong-si were found between 150 and 300m altitude, and altitudinal distribution of the infected trees was similar to that of pine forests. Only less 5% of infected trees found in the forests located below 5 degree of slope in Yeongdeok-gun whereas 18% of total pine trees existed in the areas. Over 50% of infected trees in the forests located from 10 to 20 degree of slope, and 47% of total pine trees were found in the forests located from 5 to 15 degree of slope. Most infected trees and total pine trees were found in the forests located below 15 degree of slope in Andong-si. Over 80% of the infected trees occurred within 1km of road in both study areas.

The present research investigated copper and cadmium stress-induced differentially expressed genes (DEGs) using annealing control primers (ACP) with the differential display reverse transcription polymerase chain reaction technique in alfalfa (Medicago sativa L. cv. Vernal) leaves. Alfalfa leaves were subjected to 250 μM of copper and cadmium treatment for a period of 6 h. A total of 120 ACPs was used. During copper and cadmium treatment, 6 DEGs were found to be up or down regulated. During copper stress treatment, 1 DEG was up-regulated, and 3 novel genes were discovered. Similarly, during cadmium stress treatment, 1 DEG was up-regulated and 5 novel genes were identified. Among all 6 DEGs, DEG-4 was identified as the gene for trans-2,3-enoyl-CoA reductase, DEG-5 was identified as the gene for senescence-associated protein DIN1 and DEG-6 was identified for caffeic acid O-methyltransferase. All the up-regulated genes may play a role in copper and cadmium stress tolerance in alfalfa.

This paper compared the consistency of the Environment Stress(ES) model and the Potential Risk Assessment Model (PARK model, which was developed based on a Korean mariner risk perception) for the Busan adjacent waterway. Evaluation of accuracy and comparison of these two models have been made by Vessel Traffic Service (VTS) officers in the Busan VTS Centre. The assessment results of Busan waterway show that the PARK model is more consistent than the ES model as follows. (1) The difference between assessment results applying ES model and PARK model with risk degree of VTSOs were 34% and 5% respectively in six typical traffic situations. (2) The assessment using PARK model is more suitable and identical with the VTSOs opinion in his or her duty time.

The pea leafminer fly, Liriomyza huidobrensis (Blanchard) (Diptera: Agromyzidae), is a polyphagous pest attacking wide range of field and greenhouse crops and ornamental plants. Surprisingly, localized outbreaks with high population and heavy unique damage of leafminers were observed from the field survey of potato fields in the southern parts (Miryand and Goryeong) of Korea in 2012. L. huidobrensis was the responsible for those potato damages based on the morphological and genetic characteristics. Then after, it added a one more emerging species in Korean Liriomyza account. Infestation of L. huidobrensis was expanding and reported in major potato growing areas of the country. Genetic evidence showed the close relationship with Chinese L. huidobrensis population, so it might be invaded from China. As a new emerging pest, very few informations relative to this pest are available in Korean prospective. There is also significant potential for it to widen its distribution, as the Korean Peninsula is a hot spot of climate change, particularly global warming. There are a lot of challenges uprooting infront of researchers and growers. It is demanded to explore new secrets and to be ready to tackle of this invasive pest, L. huidobrensis.

The effects of the mixing of an active material and a conductive additive on the electrochemical performance of an electric double layer capacitor (EDLC) electrode were investigated. Coin-type EDLC cells with an organic electrolyte were fabricated using the electrode samples with different ball-milling times for the mixing of an active material and a conductive additive. The ball-milling time had a strong influence on the electrochemical performance of the EDLC electrode. The homogeneous mixing of the active material and the conductive additive by ball-milling was very important to obtain an efficient EDLC electrode. However, an EDLC electrode with an excessive ball-milling time displayed low electrical conductivity due to the characteristic change of a conductive additive, leading to poor electrochemical performance. The mixing of an active material and a conductive additive played a crucial role in determining the electrochemical performance of EDLC electrode. The optimal ball-milling time contributed to a homogeneous mixing of an active material and a conductive additive, leading to good electrochemical performance of the EDLC electrode.

Insect pollinators of the endanger orchid Cypripedium japonicum were surveyed and identified during two years, as a part of a conservation project of the orchid at Jukyeup-san and Hwaak-san (Mt.), South Korea. In total 40 individuals of 16 species in 4 families were identified. The dominant family was Halictidae, and Lasioglossum exiliceps Vachal visited the most frequently C. japonicum during the surveys. The average visiting frequency was 2.5 individuals per hour and the highest 4.3, from 12:00 – 13:00 in a day. After 15:00 insects did not visit the flowers at all. However, all of the visiting insects were found to not carry a pollinium or pollens of the orchard on their bodies; pollen carryover by any of the visiting insects did not occur at all. The orchid seems to require certain pollinators in particular body thickness due to its unique pollination mechanism. The orchid has two exit route openings, around 1 cm in diametre, where the entrapped insects can exit and an anther is situated just in front of each opening. It was inferred that a pollen carrier should be around 1 cm in body thickness. Therefore, the candidate species as the proper pollen carriers can be Tetralonia nipponensis Perez, Xylocopa appendiculata circumvolans Smith and Bombus consobrinus Dahlbom among the surveyed visitors.

Many automotive components for power generation such as motors and alternators have been widely using ferrite magnets. To ensure a high level of efficiency could be achieved in an alternator, the assembled magnets must be in good enough durability. Recently, some hairline cracks have been found on the magnet produced by manufacturers in Korea. Thus, there is an increasing concern that some of the magnets produced could cause further problems after being assembled in the alternator. Based on the standard alternator test (RS0008 : 2006), this paper has developed an accelerated failure-free test for magnets in alternator to demonstrate that assembled magnets will meet durability objective specified by the manufacturer. This guarantees the target life of the magnet with 90 percent reliability and 90 percent confidence level (R90C90). Temperature and rotation speed were selected as accelerated stress factors.

Flexible transparent conducting films (TCFs) were fabricated by dip-coating single-wall carbon nanotubes (SWCNTs) onto a flexible polyethylene terephthalate (PET) film. The amount of coated SWCNTs was controlled simply by dipping number. Because the performance of SWCNT-based TCFs is influenced by both electrical conductance and optical transmittance, we evaluated the film performance by introducing a film property factor using both the number of interconnected SWCNT bundles at intersection points, and the coverage of SWCNTs on the PET substrate, in field emission scanning electron microscopic images. The microscopic film property factor was in an excellent agreement with the macroscopic one determined from electrical conductance and optical transmittance measurements, especially for a small number of dippings. Therefore, the most crucial factor governing the performance of the SWCNT-based TCFs is a SWCNT-network structure with a large number of intersection points for a minimum amount of deposited SWCNTs.

This study investigated the effects of drying methods and drying time on the changes in anthocyanin content in colored barley. Colored barley cultivar Boanchalbori was harvested at a time when the anthocyanin content was the most and dried in afield. The harvested barley was then treated by two methods, sun drying and shade drying, for 4, 8, 24, and 32 h. The moisture content of the sun-dried barley decreased slightly faster than shade-dried samples, but the difference was not statistically significant. Chemical analysis indicated that the samples dried under shaded conditions had slightly higher crude fiber and lower nitrogen free extract, but the difference was not statistically significant. There was no difference in the total digestible nutrients between the two methods. In the case of sun-dried barley, the anthocyanin content decreased compared to the control and shade-dried samples after drying for 4 h (p < 0.05), was maintained at a constant level at 24 h, and then decreased at 32 h. In case of shade-dried barley, the anthocyanin content decreased gradually with the drying time, and a significant decrease was found at 24 h of drying (p<0.05) as compared to the control. The shade-dried method was more successful in reducing anthocyanin loss than the sun-dried method (p<0.05). There was a slight decrease in 1,1-Diphenyl-2-Picrylhydrazyl radical scavenging with drying time in the shade-dried method, and a significant decrease after 4 h with the sun-dried method. These results showed that covering with a two-layer awning was advantageous to dry colored barley in the field conditions.

The aim of the current study was to analyze the active ingredients and to screen the pharmacological properties of freshwater laver, Prasiola japonica, the only species grown in Korea. According to results of gas chromatography- mass spectrometry assay, components from P. japonica were more diverse than those from sea laver. Of particular interest, our results indicated that ethanol extract of P. japonica (PJE) contained loliolide, sorbitol, mannitol, and alverine, which were known to have an anti-oxidant, anti-oral microbial, osmotic diuresis, and smooth muscle relaxant, respectively. In addition, five solvent fractions of PJE (water, butanol, chloroform, ethyl acetate, and hexane) significantly inhibited the production of lipopolysaccharide-induced nitric oxide and a higher amount (>100 μg/mL) of chloroform, ethyl acetate, and hexane fraction were considered to play a specific role in cancer cell death. PJE and its solvent fractions found to be effective scavengers of free radicals, particularly, hydroxyl radicals. Glucose uptake in L6 myoblast cell line that stably expresses the glucose transporter type 4 (GLUT4) proteins was also remarkably enhanced upon treatment with solvent fractions, remarkably chloroform fraction. Taken together, we concluded that P. japonica may have potent pharmacological properties and thus contribute to development of novel natural candidates for various disease targets.