At a time when the demand for drones is increasing, a plan to utilize drone images was sought for efficient promotion of cadastral resurvey. To achieve the purpose of this study, the technical and legal status of drone images was reviewed, and through this, the possibility of using it for cadastral resurvey was primarily reviewed. subsequently, an experiment was conducted targeting the project district to examine whether drone images were applied to boundary extraction, which is the primary process of cadastral resurvey. As a result of the experiment, it was found that boundary extraction from images is possible. However, in some cases, it is impossible due to field conditions or image quality. Therefore, it is necessary first to apply cases where boundary extraction is possible to cadastral resurvey and seek solutions for some impossible cases. In particular, the image quality problem may have problems with the current technology, but it will also have problems with the existing drone equipment. So, standard for drone calibration should also be established. Finally, the cadastral resurvey surveying procedure using drones was also presented.

목적 : 건강한 20대를 대상으로 각막내피세포의 형태학적 분석을 실시하고, 양안, 성별, 굴절교정수술 여부, 콘택트렌즈 착용여부, 코로나바이러스-19의 감염에 따른 차이를 알아보고자 하였다. 방법 : 충청남도 일개 대학교에서 20대 남녀 87명(174안)을 대상으로 하였다. 각막내피세포의 형태학적 분석 은 비접촉식 경면현미경을 이용하여 검사하였고, 각막내피세포의 밀도, 내피세포의 다형성, 육각형비율, 그리고 중심각막두께를 분석하였다. SPSS 18.0 프로그램을 이용하여 양안, 성별, 그리고 그 외에 조사한 변수에 따른 각 막내피세포의 밀도, 다형성 및 육각형 비율을 측정하였다. 결과 : 우안과 좌안에서 각막내피세포의 밀도는 각각 2,977.7±238.7 cells/mm2와 3,008.9±236.7 cells/mm2(p=0.056)이었고, 남성과 여성은 각각 2,970.9±237.9 cells/mm2와 2,983.6±241.8 cells/mm2로 통 계적으로 유의한 차이가 없었다(p=0.807). 각막내피세포의 다형성과 육각형 비율도 양안, 성별, 굴절교정수술 여 부. 코로나바이러스-19 감염 유무에 따라 유의한 차이가 없었다(p>0.050). 그러나 각막내피세포의 다형성과 육각 형 비율은 콘택트렌즈 착용 군과 대조군에서 각각 30.7±4.5%와 61.9±5.4% 그리고 28.2±4.0%와 64.7±4.7% 를 보였다(각각 p=0.018와 p=0.029). 결과 : 한국 20대 성인을 대상으로 분석한 각막내피세포 밀도의 평균값은 2,993.3±237.5 cells/mm2이었고, 양안과 성별에 따른 차이는 없었다.

In 2022, research for native prokaryotic species in Korea reported 10 unrecorded bacterial strains affiliated to phyla Actinomycetota, Bacillota, and Pseudomonadota. The strains formed monophyletic clades with the most closely related species (with ≥98.7% sequence similarity) in the 16S rRNA gene sequencing. Among them, four species of the phylum Actinomycetota, two species of the phylum Bacillota, and four species of the phylum Pseudomonadota have not been reported in Korea, suggesting unrecorded species in Korea. Information on strains such as Gram staining reaction, colony and cell morphology, biochemical characteristics, and isolation sources were provided in the species description.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

Extensive research and testing continue to be conducted for the development of vaccines targeting zoonotic diseases such as brucellosis. In this study, the potential of the DapB as a recombinant protein vaccine to effectively combat Brucella abortus 544 infection in BALB/c mice was evaluated. Western blotting assay results showed that recombinant protein DapB reacted with Brucella-positive serum, indicating its potential immunoreactivity. In vivo results showed that the peripheral blood CD4+ and CD8+ T cell population significantly increased in the DapB-immunized mice group after the first, second and third blood collection, compared to the control group that received PBS. Additionally, at the fourth blood collection, an increase in CD4+ T cell activation was observed in three vaccination groups compared to PBS negative control group. These results indicate the potential of DapB in stimulating cellular immunity. Fourteen days after infection, the bacterial load in the spleen was evaluated. The reduction in bacterial replication in the spleen by both DapB and RB51 highlights their protective efficacy against Brucella infection. These findings contribute to the ongoing efforts in developing effective vaccines against brucellosis and provide valuable insights for further research in this field.

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH3-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

본 연구는 금속 인공물을 감소시키기 위한 VAT(view angle tilting)와 SEMAC(slice encoding for metal correction) 기법 적용에 따른 온도 변화 범위를 관찰하고자 하였다. 제작된 인체 모방 팬텀을 활용하였고, 검사방법으로는 임상에서 실제로 사용하고 있는 고속스핀에코(fast spin echo, FSE) 기법의 영상 파라미터들을 그대로 이용하였다. VAT 와 SEMAC 기법은 FSE와 같은 파라미터로 설정한 다음 VAT 파라미터는 100%와 SEMAC 파라미터는 25로 설정하였다. 온도 측정 방법으로는 수소원자 공명주파수전이법(proton resonance frequency shift, PRFS)기법을 활용하였으며, 광 섬유 온도계(fiber-optic sensor, FOS)로 절대 온도를 측정한 후 비교 분석하였다. 온도 변화는 SEMAC 기법에서 기존 FSE 기법 (0.28℃±0.10℃)에 비해 1.63℃±0.12℃로 약 6배 상승하였고(SEMAC-FOS = 1.59℃), VAT 기법은 약 2배 증가(VAT-FOS = 0.51℃)가 확인되었다. 특히, SEMAC 기법은 VAT 기법(VAT-FOS = 0.51℃, VAT-PRFS = 0.54℃ ±0.02℃)과 비교하여 약 3배가 증가하여 가장 높은 온도 상승이 관찰되었다. 이는 SEMAC 기법 적용 시 자기공명영상 전자파 인체 영양에 대한 안전기준을 충족하기 위해 영상 파라미터 최적화 작업의 필요성을 시사한다.

DWI 검사 시 인체 조직 및 병변에 근접한 공기는 영상왜곡을 가중해 병변 감별에 어려움을 준다. 이에 본 연구는 팬텀을 제작하 여 기하학적 왜곡을 줄여주는 SMS RESOLVE DWI를 통해 공기 자화율에 의한 왜곡 변화를 정량화하였다. 팬텀은 원통형으로 내부에 공기가 존재하도록 설계하였다. 제한된 환경 속에서 다양한 자화율에 의해 왜곡이 영상에 구현되도록 팬텀 내부에는 증류수, 젤라틴 외 혼합 물질과 공기를 구분되게 채웠다. 팬텀의 정렬을 다르게 하여 공기 있는 상태 실험을 진행 후, 공기 대신 혼합액 넣은 상태 실험을 같은 방식으로 진행하였고 혼합액 대신 증류수 넣은 상태 실험을 진행하였다. 3T MRI 장비로 T2WI, C DWI, SMS-RESOLVE DWI를 촬영하였고 파이썬 OpenCV로 이미지 유사도를 측정 후 비교 분석하였다. 실험 결과 공기 있는 상태 SMS-RESOLVE DWI b0에서 SSIM 평균 0.898, MSE 평균 0.068로 영상왜곡이 가장 적었다. SMS-RESOLVE DWI의 공기 자화율 왜곡 변화는 b0 기준 SSIM, MSE 모두 –0.033~0.003 이미지 유사도 차이를 보였다. SMS-RESOLVE DWI b1000은 수치상 이미지 유사도 차이가 크지 않거나 감쇄되는 때도 있어서 향후 SNR 보완에 초점을 둔다면 보다 개선된 영상진단 성능을 제공할 것으로 기대되고 오픈 소스 라이브러리를 통해 오차를 최소화한 이미지 처리와 유사도를 분석하는 새로운 시도는 앞으로의 연구 방향에 새 모델을 제시한다.

In the realm of dental prosthesis fabrication, obtaining accurate impressions has historically been a challenging and inefficient process, often hindered by hygiene concerns and patient discomfort. Addressing these limitations, Company D recently introduced a cutting-edge solution by harnessing the potential of intraoral scan images to create 3D dental models. However, the complexity of these scan images, encompassing not only teeth and gums but also the palate, tongue, and other structures, posed a new set of challenges. In response, we propose a sophisticated real-time image segmentation algorithm that selectively extracts pertinent data, specifically focusing on teeth and gums, from oral scan images obtained through Company D's oral scanner for 3D model generation. A key challenge we tackled was the detection of the intricate molar regions, common in dental imaging, which we effectively addressed through intelligent data augmentation for enhanced training. By placing significant emphasis on both accuracy and speed, critical factors for real-time intraoral scanning, our proposed algorithm demonstrated exceptional performance, boasting an impressive accuracy rate of 0.91 and an unrivaled FPS of 92.4. Compared to existing algorithms, our solution exhibited superior outcomes when integrated into Company D's oral scanner. This algorithm is scheduled for deployment and commercialization within Company D's intraoral scanner.

The purpose of this study is to determine the concepts of heterotopic image and fashion space, and the characteristics of fashion space and images from the perspective of fashion brands and users. This study examines the evolution of fashion space and consumers with it, based on Foucault’s theory of heterotopia, which refers to spaces that blend contradictory features not typically found within a single physical structure. This is accomplished by employing a single case study of Ader Error’s Ader Space, a Seoul-based brand known for its unique approach to presenting and communicating fashion. Based on an analysis of Instagram posts of Ader Error along with the hashtag searches “aderspace” and “adererror”, this study categorizes heterotopia from the perspective of fashion brands into three properties: fashion space as a medium for selling fashion products; fashion space as getaway to hybrid fashion practices; and fashion space as an illusionary place to experience fashion. From the user perspective, the heterotopic image of Ader Space portrayed on Instagram is characterized by the image of fashion products in an extraordinary fashion space, the image of a fashion space beyond space and time, and the image of exposing the hidden and the illusioncompensation of fashion space. This study contributes to a heightened understanding of the evolutionary concept of the fashion space.

The thermoelectric effect, which converts waste heat into electricity, holds promise as a renewable energy technology. Recently, bismuth telluride (Bi2Te3)-based alloys are being recognized as important materials for practical applications in the temperature range from room temperature to 500 K. However, conventional sintering processes impose limitations on shape-changeable and tailorable Bi2Te3 materials. To overcome these issues, three-dimensional (3D) printing (additive manufacturing) is being adopted. Although some research results have been reported, relatively few studies on 3D printed thermoelectric materials are being carried out. In this study, we utilize extrusion 3D printing to manufacture n-type Bi1.7Sb0.3Te3 (N-BST). The ink is produced without using organic binders, which could negatively influence its thermoelectric properties. Furthermore, we introduce graphene oxide (GO) at the crystal interface to enhance the electrical properties. The formed N-BST composites exhibit significantly improved electrical conductivity and a higher Seebeck coefficient as the GO content increases. Therefore, we propose that the combination of the extrusion 3D printing process (Direct Ink Writing, DIW) and the incorporation of GO into N-BST offers a convenient and effective approach for achieving higher thermoelectric efficiency.

Extant studies assessing determinants of peer-to-peer (P2P) accommodation prices have mainly focused on individual listing-level analysis, with a less attention to inter-regional dynamics between cooperation and competition. While Airbnb has announced how to set a pricing strategy tool called “smart pricing” to help hosts gauge rental rates, many hosts find that its suggesting prices are too low, failing to offer a robust picture of their destination market (Jiang et al., 2022). This calls for a research on how P2P accommodation hosts can benefit from coopetitive pricing strategy – a hybrid behavior of cooperation and competition that occurs among hosts or regions (Chim-Miki & Batista-Canino, 2018).