Currently, Hanul NPP packages glass fiber classified as particulate waste in plastic packaging bags and stores them in 200 L drums. KORAD’s Waste Acceptance Criteria (WAC) presents that very low-level soil can be immobilized by loading it in a soft bag and then packaging it in a 200 L or 320 L steel drum. As currently accepted method of packaging with soft bag applies to only very low-level soils among the wastes with a risk of dispersion, it is necessary to develop a non-dispersible treatment suitable for the characteristics of other particulate waste in the future. Therefore, in order for Hanul packaging pack to be approved as an alternative method for immobilization of dispersible substances, it is necessary to verify the suitability of the packaging bag. In this paper, whether the glass fiber packaging bag used in Hanul NPP satisfies the characteristic of the soft bag presented in the WAC and the possibility of being considered as a non-dispersible measure for particulate are examined. The soft bag must meet the following requirements: material and structure, shape, drop test, and immersion test. The results of the review are as follows. First, since the glass fiber is already packaged in the drum, only the role of the inner layer, made of polyethylene, having a watertight function may be required. Second, when packaging a drum, the packaging bag is compressed into a shaped frame having an inner size of a 200 L drum, so it is packaged with little empty space in the drum. Third, as a result of a drop test of a packaging pack containing 20 kg of contents from a height of 1.2 m, it was confirmed that there was no leakage of contents. Fourth, the packaging bag was immersed in a 1-m depth water tank for 30-minutes, and the performance corresponding to the IPX7 was satisfied. As a result of reviewing the soft bag characteristic of Hanul glass fiber packaging bag, it is considered that the bag can be used as one of the non-dispersible measures because it meets almost the characteristics required by the WAC. In addition, the acceptance criteria of overseas disposal sites present various secure packaging methods in place of immobilization as a non-dispersible measure for waste containing particulate matter. It is necessary to reflect these overseas cases in the establishment of non-dispersible measures for domestic waste acceptance in the future.

The establishment of porcine embryonic stem cells (ESCs) from porcine somatic cell nuclear transfer (SCNT) blastocysts is influenced by in vitro culture day of porcine reconstructed embryo and feeder cell type. Therefore, the objective of the present study was to determine the optimal in vitro culture period for reconstructed porcine SCNT embryos and mouse embryonic fibroblast (MEF) feeder cell type for enhancing colony formation efficiency from the inner cell mass (ICM) of porcine SCNT blastocysts and their outgrowth. As the results, porcine SCNT blastocysts produced through in vitro culture of the reconstructed embryos for 8 days showed significantly increased efficiency in the formation of colonies, compared to those for 7 days. Moreover, MEF feeder cells derived from outbred ICR mice showed numerically the highest efficiency of colony formation in blastocysts produced through in vitro culture of porcine SCNT embryos for 8 days and porcine ESCs with typical ESC morphology were maintained more successfully over Passage 2 on outbred ICR mice-derived MEF feeder cells than on MEF feeder cells derived from inbred C57BL/6 and hybrid B6CBAF1 mice. Overall, the harmonization of porcine SCNT blastocysts produced through in vitro culture of the reconstructed embryos for 8 days and MEF feeder cells derived from outbred ICR mice will greatly contribute to the successful establishment of ESCs derived from porcine SCNT blastocysts.

Although somatic cell nuclear transfer (SCNT)-derived embryonic stem cells (ESCs) in pigs have great potential, their use is limited because the establishment efficiency of ESCs is extremely low. Accordingly, we tried to develop in-vitro culture system stimulating production of SCNT blastocysts with high performance in the colony formation and formation of colonies derived from SCNT blastocysts for enhancing production efficiency of porcine ESCs. For these, SCNT blastocysts produced in various types of embryo culture medium were cultured in different ESC culture medium and optimal culture medium was determined by comparing colony formation efficiency. As the results, ICM of porcine SCNT blastocysts produced through sequential culture of porcine SCNT embryos in the modified porcine zygote medium (PZM)-5 and the PZM-5F showed the best formation efficiency of colonies in α-MEM-based medium. In conclusion, appropriate combination of the embryo culture medium and ESC culture medium will greatly contribute to successful establishment of ESCs derived from SCNT embryos.

To date, there are no protocols optimized to the effective separation of spermatogonial stem cells (SSCs) from testicular cells derived from mouse testes, thus hindering studies based on mouse SSCs. In this study, we aimed to determine the most efficient purification method for the isolation of SSCs from mouse testes among previously described techniques. Isolation of SSCs from testicular cells derived from mouse testes was conducted using four different techniques: differential plating (DP), magnetic-activated cell sorting (MACS) post-DP, MACS, and positive and negative selection double MACS. DP was performed for 1, 2, 4, 8, or 16 h, and MACS was performed using EpCAM (MACSEpCAM), Thy1 (MACSThy1), or GFR α1 (MACSGFRα1) antibodies. The purification efficiency of each method was analyzed by measuring the percentage of cells that stained positively for alkaline phosphatase. DP for 8 h, MACSThy1 post-DP for 8 h, MACSGFRα1, positive selection double MACSGFRα1/EpCAM, and negative selection double MACSGFRα1/α-SMA were identified as the optimal protocols for isolation of SSCs from mouse testicular cells. Comparison of the purification efficiencies of the optimized isolation protocols showed that, numerically, the highest purification efficiency was obtained using MACSGFRα1. Overall, our results indicate that MACSGFRα1 is an appropriate purification technique for the isolation of SSCs from mouse testicular cells.

Mesenchymal stem cells (MSCs) have been considered an alternative source of neuronal lineage cells, which are difficult to isolate from brain and expand in vitro. Previous studies have reported that MSCs expressing Nestin (Nestin+ MSCs), a neuronal stem/progenitor cell marker, exhibit increased transcriptional levels of neural development-related genes, indicating that Nestin+ MSCs may exert potential with neurogenic differentiation. Accordingly, we investigated the effects of the presence of Nestin+ MSCs in bone-marrow-derived primary cells (BMPCs) on enhanced neurogenic differentiation of BMPCs by identifying the presence of Nestin+ MSCs in uncultured and cultured BMPCs. The percentage of Nestin+ MSCs in BMPCs was measured per passage by double staining with Nestin and CD90, an MSC marker. The efficiency of neurogenic differentiation was compared among passages, revealing the highest and lowest yields of Nestin+ MSCs. The presence of Nestin+ MSCs was identified in BMPCs before in vitro culture, and the highest and lowest percentages of Nestin+ MSCs in BMPCs was observed at the third (P3) and fifth passages (P5). Moreover, significantly the higher efficiency of differentiation into neurons, oligodendrocyte precursor cells and astrocytes was detected in BMPCs at P3, compared with P5. In conclusion, these results demonstrate that neurogenic differentiation can be enhanced by increasing the proportion of Nestin+ MSCs in cultured BMPCs.

The bumblebee, Bombus terrestris, plays an important role as one of alternative pollinators since the outbreak of honeybee colony collapse disorder. Recently, pathogens and parasites such as viruses, bacteria and mites affecting the life span and fecundity of their host have been discovered in B. terrestris. In this study, in order to detect viral infection in B. terrestris, we collected B. terrestris adults and isolated total RNA for diagnostic PCR. The PCR primers specific for pathogenic viruses were newly designed and applied to gene amplification for cloning and detection. Capsid protein gene of black queen cell virus (BQCV) among examined viral genes was only successfully amplified from collected bumble bee adults and sequenced. To optimize the detection of capsid protein gene of BQCV, 4 regions in the capsid protein gene were selected and further analyzed in quantitative real-time PCR (qRT-PCR). The qRT-PCR analysis revealed that capsid protein gene was directly detected with not more than 200 ng total RNA. This result suggests that an optimized detection via qRT-PCR can be applied for the rapid and sensitive diagnosis of BQCV infection in the field population as well as risk assessment of B. terrestris.

The bumblebee, Bombus terrestris, has played an important role as one of the alternative pollinators since the outbreak of honeybee collapse disorder. Recently, pathogens and parasites such as viruses, bacteria and mites, which affect the life span and fecundity of their host, have been discovered in B. terristris. In order to detect the microsporidian pathogen, Nosema Spp. in the field populations of B. terristris, we collected adults and isolated their genomic DNA for diagnostic PCR. The PCR primers specific for Nosema Spp. were newly designed and applied to gene amplification for cloning. Only small subunit ribosomal RNA(SSU rRNA) gene of N. ceranae was successfully amplified and sequenced among examined genes, which indicates that N. ceranae mainly infects the examined field population of B. terristris. To detect of SSU rRNA gene, two regions of SSU rRNA gene were selected by primary PCR analysis and further analyzed in quantitative real-time PCR(qRT-PCR). The qRT-PCR analysis demonstrated that SSU rRNA of N. ceranae was detected at concentrations as low as 0.85 ng/μl genomic DNA. This result suggests that the detection via qRT-PCR can be applied for the rapid and sensitive diagnosis of N. ceranae infection in the field population as well as risk assessment of B. terristris.

The bumblebee, Bombus terrestris, has played an important role as one of the alternative pollinators. Recently, pathogens and parasites affect the life span and fecundity of their host and been isolated from B. terristris. In order to detect viral infection in the field populations of B. terristris, we collected adults and isolated total RNA for reverse transcriptase-polymerase chain reaction (PCR). The PCR primers specific for several viruses such as deformed wing virus, Israel acute paralysis virus, Kashmir bee virus and black queen cell virus (BQCV) were newly designed and applied to gene amplification for cloning. Only BQCV was successfully amplified and sequenced, which suggests that BQCV may mainly infects the examined field population of B. terristris. To detect of capsid protein gene of BQCV, 4 selected regions were analyzed by primary PCR and 1 region was successfully amplified, which was further analyzed in quantitative real-time PCR (qRT-PCR). The qRT-PCR analysis demonstrated that BQCV was detected at concentrations as low as 0.1ng/μl total RNA. This result suggests that the detection via qRT-PCR can be applied for the rapid and sensitive diagnosis of BQCV infection in the field population as well as risk assessment of B. terristris.

Bombus terrestris has played an important role in the pollination in agricultural fields for the alternatives in colony collapsing in the honeybee. Recently, some pathogens or parasites such as viruses, bacteria, mites have been discovered in B. terristris, which affects its life span and fecundity. In order to detect a microsporidian, Nosema apis. in the field population, we collected honeybees and isolated genomic DNA. PCR primers specific for 16S ribosomal RNA (16S rRNA) were synthesized and applied to gene amplification for cloning and quantitative real-time PCR (qRT-PCR). The amplified gene was cloned and sequenced to confirm the 16S rRNA gene. qRT-PCR analysis showed the detection limit of 16S rRNA of Nosema apis was approximately 0.5 ng/μl genomic DNA. This result suggests that detection via qRT-PCR can be applied for the diagnosis of pathogen infection.

Currently, honeybee colonies are not stable and suffer from the infection of pathogens, affecting the pollination. For the alternatives to this difficulty, Bombus terrestris has been imported and used for pollination in agricultural fields. Although imported insects for pollination are very useful, the potential risk exposing to novel pathogens has been raised. To assess the risk primarily, we designed and synthesized PCR primers for detection of pathogens and parasites in B. terrestris. The samples were obtained from companies importing B. terrestris or field collections and genomic DNAs not showing physical shearing were purified. PCR for detection of pathogen- or parasite-specific gene revealed several DNA fragments were amplified in expected molecular size including Kashmir Bee Virus, Varroa jacobsoni, V. rindereri, Acarapis woodi and Aspergillus flavus. These amplified DNA fragments are in the process of cloning for DNA sequencing to confirm the target gene amplification. We also have plans to optimize the PCR conditions for each amplified target gene and try to develop biomarkers for diagnosis.

전국 8개 지역별 각 사과원에서 채집된 점박이응애(Tetranychus urticae Koch)에 대한 저항성 정도를 일본 감수성 계통과 비교한 결과 지역별 현저한 감수성 차이를 보였다. Azocyclotin, fenpropathrin, propargite 및 abamectin에 대해서는 낮거나 중간 정도의 저항성을, dicofol, fenpyroximate 및 pyridaben에 대해서는 높은 저항성을 나타내었다. 이들 계통은 한종 또는 두종 이상의 약제에 대해 감수성을 보여 특정 지역에 대해서는 적당한 살비제의 선택적 이용으로 점박이응애를 효과적으로 방제할 수 있을 것으로 사료된다.

Method 9 is a reference method established by U.S. Environmental Protection Agency (EPA) to quantify plume opacity by the certified observer. Later, digital Optical Method (DOM) was developed to quantify plume opacity from digital photographs for bright and dim conditions. However, there is a limitation for the use of Method 9 and DOM to quantify the plume opacity especially for dim condition. In this paper, DIM-DOM system was used instead of DOM to quantify plume opacity during dim condition. Opacity readings provided by DIM-DOM were compared with the opacity values obtained with the reference in-stack transmissometer of the smoke generator. The individual opacity error results demonstrated that DIM-DOM met Method 9’s requirements. The individual opacity values ranging from 0 to 100% compare well to the corresponding opacity results from the in-stack transmissometer results meeting USEPA’s Method 9 IOE requirement of ≤15%. These results are encouraging and indicate that DIM-DOM has the potential to quantify plume opacity during dim condition.