In this study, the layered structures of immiscible Fe and Cu metals were employed to investigate the interface evolution through solid-state mixing. The pure Fe and Cu powders were cold-consolidated by high-pressure torsion (HPT) to fabricate a layered Cu-Fe-Cu structure. The microstructural evolutions and flow of immiscible Fe and Cu metals were investigated following different iterations of HPT processing. The results indicate that the HPTprocessed sample following four iterations showed a sharp chemical boundary between the Fe and Cu layers. In addition, the Cu powders exhibited perfect consolidation through HPT processing. However, the Fe layer contained many microcracks. After 20 iterations of HPT, the shear strain generated by HPT produced interface instability, which caused the initial layered structure to disappear.

We investigate 20 post-coronal mass ejection (CME) blobs formed in the post-CME current sheet (CS) that were observed by K-Cor on 2017 September 10. By visual inspection of the trajectories and projected speed variations of each blob, we nd that all blobs except one show irregular \zigzag" trajectories resembling transverse oscillatory motions along the CS, and have at least one oscillatory pattern in their instantaneous radial speeds. Their oscillation periods are ranging from 30 to 91 s and their speed amplitudes from 128 to 902 kms􀀀1. Among 19 blobs, 10 blobs have experienced at least two cycles of radial speed oscillations with dierent speed amplitudes and periods, while 9 blobs undergo one oscillation cycle. To examine whether or not the apparent speed oscillations can be explained by vortex shedding, we estimate the quantitative parameter of vortex shedding, the Strouhal number, by using the observed lateral widths, linear speeds, and oscillation periods of the blobs. We then compare our estimates with theoretical and experimental results from MHD simulations and uid dynamic experiments. We nd that the observed Strouhal numbers range from 0.2 to 2.1, consistent with those (0.15{3.0) from uid dynamic experiments of blu spheres, while they are higher than those (0.15{0.25) from MHD simulations of cylindrical shapes. We thus nd that blobs formed in a post-CME CS undergo kinematic oscillations caused by uid dynamic vortex shedding. The vortex shedding is driven by the interaction of the outward-moving blob having a blu spherical shape with the background plasma in the post-CME CS.

Several factors, including genetic and environmental insults, impede protein folding and secretion in the endoplasmic reticulum (ER). Accumulation of unfolded or mis-folded protein in the ER manifests as ER stress. To cope with this morbid condition of the ER, recent data has suggested that the intracellular event of an unfolded protein response plays a critical role in managing the secretory load and maintaining proteostasis in the ER. Tauroursodeoxycholic acid (TUDCA) is a chemical chaperone and hydrophilic bile acid that is known to inhibit apoptosis by attenuating ER stress. Numerous studies have revealed that TUDCA affects hepatic diseases, obesity, and inflammatory illnesses. Recently, molecular regulation of ER stress in tooth development, especially during the secretory stage, has been studied. Therefore, in this study, we examined the developmental role of ER stress regulation in tooth morphogenesis using in vitro organ cultivation methods with a chemical chaperone treatment, TUDCA. Altered cellular events including proliferation, apoptosis, and dentinogenesis were examined using immunostaining and terminal deoxynucleotidyl transferase dUTP nick end labeling assay. In addition, altered localization patterns of the formation of hard tissue matrices related to molecules, including amelogenin and nestin, were examined to assess their morphological changes. Based on our findings, modulating the role of the chemical chaperone TUDCA in tooth morphogenesis, especially through the modulation of cellular proliferation and apoptosis, could be applied as a supporting data for tooth regeneration for future studies.

In this research, a new medium-entropy alloy with an equiatomic composition of FeCuNi was designed using a phase diagram (CALPHAD) technique. The FeCuNi MEA was produced from pure iron, copper, and nickel powders through mechanical alloying. The alloy powders were consolidated via a high-pressure torsion process to obtain a rigid bulk specimen. Subsequently, annealing treatment at different conditions was conducted on the four turn HPT-processed specimen. The microstructural analysis indicates that an ultrafine-grained microstructure is achieved after post-HPT annealing, and microstructural evolutions at various stages of processing were consistent with the thermodynamic calculations. The results indicate that the post-HPT-annealed microstructure consists of a dual-phase structure with two FCC phases: one rich in Cu and the other rich in Fe and Ni. The kernel average misorientation value decreases with the increase in the annealing time and temperature, indicating the recovery of HPT-induced dislocations.

The present study was designed to determine the effect of barn or cycle of grazing on changes of biochemical metabolites in prepartum and changes of milk composition in postpartum of dairy cows. For this purpose, a total of sixteen 25 months old Holstein primiparous dairy cows were allocated in two groups (n=8) with an average body weight of 571.61 ± 35.30 kg (Barn) and 578.10 ± 39.20 kg (Grazing). The study was conducted from June 2018 to October 2018. Results revealed that barn raised dairy cows had a higher increase in their serum albumin and calcium level on day 14 prepartum. However, the level of palmitic acid, saturated fatty acid increased significantly, and the level of fat, oleic acid, γ-linoleic acid, arachidonic acid and unsaturated fatty acids decreased significantly in barn raised dairy cow’s milk on day 14 postpartum. There were no significant differences observed with respect to all other biochemical metabolites, fatty acids and minerals between barn raised and cycle grazing dairy cows during prepartum and postpartum. Our study results could serve to a better understanding of barn raised cow with respect to changes of biochemical metabolites in prepartum and changes of milk composition, fatty acids and minerals content in grazing dairy cows in postpartum for estimating their physiological status.

Oligossaccharides have beneficial effects on the immune system, atopy and skin health according to the prebiotic effect on intestinal microflora. Due to the excellent physiological functions of these oligosaccharides, the demand for prebiotics is rapidly increasing in the world. In this review, it has been shown that galactooligosaccharide( GOS) intake improves skin health and atopic eczema and fructooligosaccharide( FOS) prevent atopic dermatitis in human clinical trials. These results indicate that oligosaccharides are sufficiently applicable as a functional food for improving skin health and skin diseases.

Hymenoptera is one of four largest orders of insects, with over 150,000 described species, 132 families, 27 superfamilies, and 2 suborders. There are currently about 3,000 hymenopteran species in 65 families and 20 superfamilies known in South Korea, of which the majority of the families have been studied while some of them are still poorly studied. The present overview on South Korean Hymenoptera aims to provide brief taxonomic history of the studies, a complete bibliography, a list of South Korean hymenopteran species, and information on South Korean hymenopterists for each taxon.

Lead free (1-x)(0.675BiFeO3-0.325BaTiO3)- xLiTaO3 (BFBTLT, x = 0, 0.01, 0.02, and 0.03, with 0.6 mol% MnO2 and 0.4 mol% CuO) were prepared by a solid state reaction method, followed by air quenching and their crystalline phase, morphology, dielectric, ferroelectric and piezoelectric properties were explored. An X-ray diffraction study indicates that lithium (Li) and tantalum (Ta) were fully incorporated in the BFBT materials with the absence of any secondary phases. Dense ceramic samples (> 92 %) with a wide range of grain sizes from 3.70 μm to 1.82 μm were obtained in the selected compositions (0 ≤ x ≤ 0.03) of BFBTLT system. The maximum temperatures (Tmax) were mostly higher than 420 oC in the studied composition range. The maximum values of maximum polarization (Pmax ≈ 31.01 μC/cm2), remnant polarization (Prem ≈ 22.82 μC/cm2) and static piezoelectric constant (d33 ≈ 145 pC/N) were obtained at BFBT-0.01LT composition with 0.6 mol% MnO2 and 0.4 mol% CuO. This study demonstrates that the high Tmax and d33 for BFBTLT ceramics are favorable for industrial applications.

Fast, cheap and sufficient serodiagnostic tools needs to be developed for the early detectionof brucellosis. Currently the tools cannot differentiate an active infection from vaccinated, norcan it differentiate other bacterial infections with lipopolysaccharides, especially Yersiniainfections. In this study, we purified recombinant outer membrane protein 10 and 28(rOmp10,rOmp28), and a dipstick assay(indirect or sandwich) was constructed with single(rOmp10 orrOmp28) and combined rOmps(rOmp10 and rOmp28) from Brucella(B.) abortus 544 to evaluatebovine Brucella positive serum collected during the beginning of the Korean outbreak from2006 to 2015. In application with single rOmp, rOmp10(70%; indirect, 92.11%; sandwichdipstick) and rOmp28(72.5%; indirect, 86.84%; sandwich dipstick) had comparable results. Inaddition, results indicated that dipstick with combined rOmps(rOmps10 and rOmp28) weresuperior in detecting positive serum samples, at 85% indirect and 100% sandwich dipstick. Surprisingly, the results were the same in detecting negative results at 97.78% for both singleand combined indirect dipsticks. The dipstick tools with rOmp10 and rOmp28 would be usefulfor a rapid screen method for bovine brucellosis.