KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

As part of the preparation of a glossary of terminologies related to the disposal of spent nuclear fuel, definitions of potentially issuable terminologies used in domestic regulations were inferred from relevant regulations or comparatively analyzed with foreign definitions. These terminologies are safety assessment and performance assessment, safety function and safety performance, disposal containers and package, isolation and containment, and so on. Their concise and easy-to-understand definitions have been proposed in order to obtain these opinions of stakeholders.

Honey bees are crucial pollinators for agricultural and natural ecosystems, but are experiencing heavy mortality in Korea due to a complex suite of factors. Extreme winter losses of honey bee colonies are a major threat to beekeeping but the combinations of factors underlying colony loss remain debatable. Finding solutions involves knowing the factors associated with high loss rates. To investigate whether loss rates are related to Varroa control and climate condition, we surveyed beekeepers in korea after wintering (2021–2022 to 2022–2023). The results show an average colony loss rate of 46%(2022) and 17%(2023), but over 40% colony loss before wintering at 2022. Beekeepers attempt to manage their honey bee colonies in ways that optimize colony health. Disentangling the impact of management from other variables affecting colony health is complicated by the diversity of practices used and difficulties handling typically complex and incomplete observational datasets. We propose a method to 1) Varroa mite population Control by several methods , and 2) Many nursing bee put in hive before wintering.

As an initial part of Kori-1 & Wolsung-1 Unit decommissioning planning, a characterization plan is developed to define the nature, extent and location of contaminants, determine sampling locations and protocols, determine quality assurance objectives for characterization, and define documentation requirements. The actual characterization of a facility is an iterative process that involves initial sampling according to the characterization plan, field management (such as labeling, packaging, storing, and transport) of the samples, laboratory analysis, conformance to the data quality objectives (DQOs), and then identifying any additional sampling required, refining the DQOs, and modifying the characterization plan accordingly. The final product of the facility characterization is a document that describes the type, amount, and location of contaminants that will require consideration and removal during the decommissioning operations sufficient to prepare a decommissioning plan. In this study, implementing a characterization plan, developed in accordance with this standard, will result in obtaining or deriving the above information.

Kori Nuclear Power Plant Unit 1, which began operating in 1978, is Korea’s oldest commercial nuclear reactor. The reactor was permanently shut down in June 2017, and now the decommissioning process has begun. The decommissioning process will generate a significant amount of waste that requires appropriate management to minimize the impact on the environment and human health. And the waste routing, i.e. the activities and logistics for managing the material generated, is a key point in a decommissioning project. It determines the routes from the material inventory to the envisaged material end states. In this study, we review on several factors for the selection of the waste routes in a decommissioning project. In terms of sustainability, the ‘waste hierarchy’ should be applied to routing materials from nuclear facilities. According to the waste hierarchy, the preferred end state is reuse or recycling of the waste as material or, more preferably, the avoidance of waste generation. In addition, treatments (such as decontamination and thermal treatment) that can reduce the volumes requiring disposal as radioactive waste should be considered. Another important parameter is the need to secure availability and capacity of waste routes. Short-term bottlenecks or any delay in the removal of the waste from the site often has an impact on other site activities. If possible, at least two alternative waste routes should be identified for the main categories of waste and kept available throughout the decommissioning project. All routes should be direct to the material end state if possible, but it is more important that waste is removed from the site so that other site operations are not impeded.

Spent nuclear fuels in Korea are temporarily stored at the nuclear power plant site and it is expected that will become saturated from 2031. Deep geological disposal in engineered barrier system (EBS) is one of the most important options for disposing spent nuclear fuel. The disposal canister is the first barrier that prevents leakage of nuclides in the spent nuclear fuel to the environment. Therefore, the corrosion behavior of the canister materials are significant factors in determining the overall disposal period. Oxygen-free copper is the most widely used material for disposal canisters, and manufacturing methods include forging, cold spray, and electro-deposition. In this study, corrosion behavior of materials that have the potential to replace oxygen-free copper manufactured using various 3D printing method were analyzed. As a result of electrochemical analysis of various materials such as copper manufactured by the Atmospheric Plasma Spray (APS) process and Inconel 718 manufactured by the Direct Energy Deposition (DED) process, the possibility of replacing oxygen-free copper was confirmed.

Ag-containing aluminosilicate sorbents capable of capturing iodine were prepared by sol-gelation from Na, Al, and Si alkoxides using co-solvent exchange, Ag/Na ion exchange, solvent exchange, and ambient-pressure drying. The Na+AlSi-OH gel was prepared using sodium methoxide (NaOMe): aluminum tri-sec-butoxide (Al(OsBu)3): tetraethyl orthosilicate (TEOS) molar ratios of 1.05:1:1, 1.3:1.1:1, 1.5:1.3:1. The solvent effect on textural properties such as Brunauer-Emmett-Teller (BET) surface areas and pore size distributions and Ag0 particle sizes was investigated using water with high surface tension, isopropanol and n-heptane with low surface tension. The BET surface area, average pore size, and cumulative pore volume for sorbents strongly increased with decreasing surface tension of solvents and increasing Al/Si atomic ratios. In addition, Ag0 particle sizes increased with decreasing surface tension of solvents.

To investigate L2 adolescent learners’ use of machine translation (MT), an MT error correction (EC) test was developed, based on the analysis of MT errors arising from translating the learners’ L1 of middle school EFL textbooks. Learners were also asked to report on their use of MT EC strategies on the EC task. Results indicated that mistranslated sentence and verb tense are the most difficult types of MT errors to correct. Furthermore, to resolve MT errors, guessing from context and literal translations were the two most frequently employed EC strategies. When multiple regression analysis was conducted to examine the contribution of EC strategies to the learners’ ability to correct errors, the mid proficiency learners’ reliance on literal translations and the low proficiency learners’ use of multiple EC strategies were positively associated with improved corrections of MT errors. The results of the study are discussed in light of how L2 learners need to develop competence for using MT in L2 writing.