In order to identify key nations and bird species of conservation concern we described multinational collaborations as defined using network analysis linked by birds that are found in all nations in the network. We used network analysis to assess the patterns in bird occurrence for 10,422 bird inventories from 244 countries and territories. Nations that are important in multinational collaborations for bird conservation were assessed using the centrality measures, closeness and betweenness centrality. Countries important for the multinational collaboration of bird conservation were examined based on their centrality measures, which included closeness and betweenness centralities. Comparatively, the co-occurrence network was divided into four groups that reveal different biogeographical structures. A group with higher closeness centrality included countries in southern Africa and had the potential to affect species in many other countries. Birds in countries in Asia, Australia and the South Pacific that are important to the cohesiveness of the global network had a higher score of betweenness centrality. Countries that had higher numbers of bird species and more extensively distributed bird species had higher centrality scores; in these countries, birds may act as excellent indicators of trends in the co-occurrence bird network. For effective bird conservation in the world, much stronger coordination among countries is required. Bird co-occurrence patterns can provide a suitable and powerful framework for understanding the complexity of co-occurrence patterns and consequences for multinational collaborations on bird conservation.

방울토마토의 수경재배 중 붕소+칼슘+규소 및 칼슘+규소의 복합 엽면시비가 수확 후 품질과 MAP 저장 중 저장성에 미치는 영향을 알아보고자 본 연구를 실시하였다. 엽면시비한 방울 토마토(‘Unicorn’)는 반숙 과상태에서 수확하여 산소투과성 필름으로 포장한 5oC, 11oC, 그리고 24oC에서 25일, 15일, 10일간 저장하였다. 붕소+칼슘+규소 복합처리한 방울토마토가 3가지 저장온도 모두에서 호흡과 에틸렌 발생이 억제되어 MAP 저장중 가장 낮은 생체중 감소와 가장 높은 외관상 품질을 보였다. 수확 후 조사한 방울토마토의 경도, 산도, 비타민 C 함량은 붕소+칼슘+규소 복합처리에서 가장 높았으며, 3가지 온도 모두에서 MAP 저장 후에도 모두 높게 유지되었다. 그러나 과피색, 라이코펜 함량과 당도는 수확 후에는 엽면시비 처리로 차이가 없었으나, 3가지 온도 모두 붕소+칼슘+규소 복합처리에서 가장 낮은 수치를 보였다. 이상의 결과로 볼 때 붕소+칼슘+규소 복합처리는 방울토마토의 수확후 생리 작용을 억제하고 경도, 산도, 비타민 C 함량을 높여 저장성을 향상시키는 것으로 판단되었다

Germinated brown rice flour has received much attention due to its health-functional ingredients such as dietary fibers. However, the food industry has faced challenges of using germinated brown rice flour in processed foods because it causes undesirable quality attributes such as high cooking loss and sticky texture. In this study, three different types of food additives (starches, hydrocolloids, emulsifiers) were incorporated into the formulation of extruded rice cakes and their combined effects on the cooking loss and textural properties of the germinated brown rice cakes were investigated. The addition of emulsifiers had a tendency to increase cooking loss and soften the noodle texture. Most of the starches except gelatinized and high-amylose rice flours showed similar effects to the emulsifiers. Xanthan gum, gelatin, and HPMC were positively effective in reducing the cooking loss of the rice cakes and increasing their hardness. When the ingredients were combined, the mixture of saemimyeon rice flour, HPMC, and xanthan/agar reduced the cooking loss by 66.7%. Most of all, this study provided an ingredient map that was plotted on the axis of hardness and cooking loss, depending on single and combined treatments of various ingredients.

We demonstrated an effective way of preparing melt spinnable mesophase pitches via catalytic hydrogenation of petroleum residue (fluidized catalytic cracking-decant oil) and their subsequent thermal soaking. The mesophase pitches thus obtained were analyzed in terms of their viscosity, elemental composition, solubility, molecular weight, softening point and optical texture. We found that zeolite-induced catalytic hydrogenation under high hydrogen pressure contributed to a large variation in the properties of the pitches. As the hydrogen pressure increased, the C/H ratio decreased, and the solubility in n-hexane increased. The mesophase pitch with entirely anisotropic domains of flow texture exhibited good meltspinnability. The mesophase carbon fibers obtained from the catalytically hydrogenated petroleum residue showed moderate mechanical properties.

Bryopsis africana and Pyropia kinositae are reported for the first time on the list of Korean marine algal flora based on integrated morphological-molecular study. Bryopsis africana from Korea is recognized with distinct main axes, robust thalli, pinnately and radially branched above, and basally denuded. Phylogenetic analyses revealed that B. africana was placed within a clade of Bryopsis. Bryopsis africana differs from B. corymbosa by 2.7% gene sequence divergence. Pyropia kinositae is characterized by oblong to lanceolate thalli, entire margin, purplish red in color, twice as long as broad cells in transversal section view. Phylogenetic analyses revealed that P. kinositae was placed within a clade of Pyropia. Pyropia kinositae differs from P. tenera by 1.5-1.8%, P. ishigecola by 1.2-1.3%, and P. yezoensis by 1.5-1.8% gene sequence divergence respectively.

Detailed morphological studies and molecular analyses based on plastid-encoded rbcL gene sequences were undertaken on Peyssonnelia species, a poorly known genus from Korea. We report new records for the Korean coast, Peyssonnelia harveyana and P. rumoiana. Peyssonnelia harveyana is chiefly characterized by P. rubra-type anatomy, closely packed perithallial filaments in firm matrix, hypothallial filaments arranged in parallel rows, thalli with appressed margins, hypobasal calcification, and unicellular rhizoids. Peyssonnelia rumoiana is principally characterized by two vegetative features, hypothallial filaments arranged in a polyflabellate layer, and perithallial filaments arising from the whole upper surface of each hypothallial cell (Peyssonnelia rubra-type anatomy). Our rbcL analyses revealed that P. harveynana and P. rumoiana were placed within a clade of Peyssonnelia. We also propose the new combination, Sonderophycus cauliferus comb. nov., for previous Peyssonnelia caulifera. Phylogenetic analyses revealed that our S. cauliferus was placed within a clade of Sonderophycus.

Three bamboo stands(Phyllostachys pubescens(Mazel) Ohwi, P. bambusoides Sieb. et Zucc, P. nigra var. henonis Stapf ex. Rendle) were selected to determine suitable biomass equations and productivity of Gajwa and Wola National Experimental Forests, Jinju, Southern Korea. Different independent variables such as diameter at breast height(DBH) or the combination of DBH and height(H) were used to develop biomass equations(Allometric model : logY = a + blog DBH; Linear-quadratic model : Y=aDBH + bDBH2; Linear model with DBH and height : Y=a + bDBH2·H) for each bamboo component from two age-sequence(current-year, > 1-year-old) of three bamboo stands. Based on statistical indicators, the most suitable equation model to estimate biomass from bamboo stands was a linear-quadratic model. Aboveground biomass of three bamboo stands estimated by the model was 48.864 Mg ha-1 for the P. pubescens, followed by 36.632 Mg ha-1 for the P. bambusoides, and 36.504 Mg ha-1 for the P. nigra var. henonis stands, respectively. The highest biomass in the P. pubescens stand was attributed to the morphological growth characteristics such as DBH and height. Belowground biomass was also highest for P. pubescens(53.35 Mg ha-1), followed by the P. bambusoides(36.73 Mg ha-1) and the P. nigra var. henonis(29.75 Mg ha-1) stands. The results indicate that the morphological growth characteristics such as DBH and height among bamboo species were the most important factor to determine bamboo biomass productivity at a local level.

This research was relative humidity (65, 75, 85 and 95%) growth characteristics of the oak mushroom (Lentinula edodes) 'Nongjingo’. At the relative humidity was 65% in growth chamber. On this condition the moisture content of medium surface was 60.5%. That was lower than other treatments. That condition makes Pileus was 77.1% and stipe was 65%. Among the growth characteristics according to the relative humidity, the pileus diameter at 75% relative humidity were 45.5mm that largest than other treatment and pileus thickness at 75% relative humidity were largest than other treatment. The stipe thickness at 65% relative humidity were 14.8mm that lagest than other treatment. The number of available stipes at 95% relative humidity were 13.3peace/2kg that largest than other treatment. The comparison yield ability of 1 cycle was 104.2g that result in largest than other treatment at 95% relative humidity. This result was associated to the relative humidity of fruiting bodies, the lower relative humidity result in the lower of yield. However, the lower relative humidity result in the higher number of whago, Especially, at the treatment of 65% relative humidity, all the fruit bodies were produced as Whago (dry). Therefore, the higher relative humidity influenced in the higher yield but produced water mushroom. That result was thought that ‘Nongjingo’ would be possible to produce high quality mushroom by adjusting the relative humidity appropriately.

Tyrosine-mediated cuticle tanning (pigmentation and sclerotization) is a vital process for insect growth and development. In this metabolism, dopamine and N-β-alanyldopamine (NBAD) are major precursors to black melanin-like and yellowish quinonoid pigments, respectively. NBAD synthase (Ebony) catalyzes the synthesis NBAD by conjugation of dopamine and β-alanine, while NBAD hydrolase (Tan) dose a reverse reaction of NBAD synthesis catalyzed by Ebony. In this work, we cloned cDNAs of ebony and tan from two beetle species, Tribolium castaneum and Tenebrio molitor. Loss of function phenotypes produced by RNAi for these genes indicate that Ebony, but not Tan, is required for cuticle pigmentation in both beetles. This work was supported by NRFs (NRF-2015R1A2A2A01006614).

Chitin deacetylases (CDAs) are extracellular-modifying enzymes that deacetylate chitin to produce chitosan. Insect CDAs have been divided into five groups based on phylogenetic analysis. We previously reported the functional importance of group I CDAs, TcCDA1 and TcCDA2, from Tribolium castaneum in molting, morphology of cuticle as well as in movement of legs. However, ultrastructure in the cuticle after RNAi for these genes have not been investigated. In this study, we further analyzed precise localization of these proteins and ultrastructural changes/defects of the cuticles in TcCDA1- and TcCDA2-deficient insects. Loss of function of TcCDA1 and TcCDA2 causes disorganized horizontal laminae and vertical pore canals in both rigid (e.g. elytron and ventral body wall) and soft (e.g. hindwing and dorsal body wall) adult cuticles. These results indicate that TcCDA1 and TcCDA2 are critical for development and formation of the beetle cuticles

Insect cuticle/exoskeleton covering the entire external surface of the body is essential for protecting insects from various environmental stresses. Tyrosine metabolism plays a major role in not only the darkening of cuticle but also its hardening. In this work, we have focused on the functional analysis of nine genes involved in tyrosine-mediated cuticle tanning (pigmentation and sclerotization) pathway in Tenebrio molitor, which has a unique adult cuticle coloration, dark/black dorsal thorax and elytron, and reddish ventral thorax and abdomen. The temporal and spatial expression patterns of the genes were analyzed by real-time PCR, and RNA interference (RNAi) was performed to study the functional importance of these genes in cuticle coloration and/or hardening in T. molitor. This work was supported by NRFs (NRF-2015R1A2A2A01006614 and NRF-2015R1A6A3A04060323).

In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women’s body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type’s 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.