Black carbon (BC), which is mainly contained in fine particulate matters, is one of the typical anthropogenic air pollutants that are generated from the incomplete combustion process and discharged into the atmosphere, and its various health effects particularly on children have been a growing concern. In this study, BC and particulate matters were closely analyzed in an elementary school adjacent to a high- traffic road in a large metropolitan city. The investigation showed that black carbon behaved similarly to ultrafine dust of 0.3 μm or less in the air, accounting for 20%-40% of it. The occurrence of high concentration outdoor pollution influences the BC content in indoor particulate matters. The average I/O value was 0.7 during the class-hours, and 0.8 without students. However, when students played in the classroom, the range of BC concentrations varied from 0.25 to 1.15, wider than 0.41-1.13 without students. Although this study was conducted with regard to just one elementary school, it can be considered to represent the typical air quality status of domestic schools, and it is believed to present valuable data which can be utilized to assist with preparing measures to enhance the air quality management of schools.

We report the behaviour of carbon black (CB) nanoparticles (spherical carbon shells), subjected to external pressure, using diamond anvil cell at synchrotron facility. CB nanoparticles have been synthesized by lamp black method using olive oil as combustion precursor and ferrocene as an organometallic additive. The catalyst-assisted CB has an iron oxide (γ-Fe2O3) core and amorphous carbon shell (i.e. core–shell structure). Our present study suggests that the carbon shells are partially transparent to the applied high pressure, and result in the reduction of effective pressure that gets transferred to the iron oxide core. High-pressure Raman spectroscopy results indicate that the surrounding carbon shells get compressed with pressure and this change is reversible. However, no structural transformation was observed till the highest applied pressure (25 GPa). The Raman spectroscopy results also suggests that the carbon shells are less pressure sensitive as their pressure coefficients (dω/dP) of G-peak were calculated (3.79 cm− 1/GPa) to be less than that for other carbon allotropes.

This study investigates the preparation of activated carbon fiber derived from waste cotton fabric for economical and ecofriendly recycling as well as its application to water purification. The activated carbon fiber was prepared by physical activation using steam and the adsorption property was then evaluated using methylene blue. When the activation temperature increased, the specific surface area and mesopore volume of the activated carbon fiber increased up to 2562 m2/ g and 0.214 cm3/ g, resulting in the increased adsorption of methylene blue. The results of the adsorption experiment for the activated carbon fiber were analyzed using the Langmuir and Freundlich equations. The Langmuir equation was more suitable than the Freundlich equation to explain the adsorption equilibrium. The maximum adsorption amount of methylene blue was 161.1–731.5 mg/g for fiber samples activated at temperatures ranging from 750 to 950 °C with sample labeled 750SA to 900SA according to the Langmuir equation. The kinetics of methylene blue adsorption by the activated carbon fiber were analyzed using non-linear pseudo-first-order and pseudo-second-order. Sample 750SA was suitable for the pseudo-first-order and 800SA, 850SA, and 900SA sample were suitable for the pseudo-second-order. Therefore, waste cotton fabric has the potential to be the precursor for activated carbon fiber with excellent adsorption properties.

Carbon fibers are commonly used in many specialized, high-performance applications such as race cars and aircraft due to their lightweight and high durability. The most important stage in the production of carbon fibers is the carbonization process. During this process, carbon fibers are subjected to high temperatures in the absence of oxygen to prevent fibers from burning. Labyrinth seals are attached to a carbonization furnace to prevent airflow into the furnace and to assist in the elimination of off-gases. This study investigated flow characteristics inside a carbonization furnace and the effects of different geometric parameters of labyrinth seals such as labyrinth tooth shape, number of teeth, and tooth clearance. Varying carbonization furnace operating conditions were also studied in regard to flow behavior, including fiber movement and outlet vacuum pressure. A high working gas flow rate at the furnace inlet resulted in recirculation zones. Properly regulated gas flow from the main and labyrinth inlets enabled uniform flow around the fibers’ inlet and outlet which prevented air from being trapped in the reactor. Flow behavior was minimally effected by changes to labyrinth seal geometry such as tooth length, tooth clearance, and outlet pressure. However, the movement of fibers had a clear effect on flow characteristics in the furnace.

The central theme of this work is the synthesis of single-walled carbon nanotubes (SWCNTs) through the chemical vapor deposition method (CVD). Single-walled carbon nanotubes are synthesized using catalyst-chemical vapor deposition of acetylene at 750 °C temperature. X-ray diffraction study gives a characteristic peak (002) at 26.55° corresponding to the existence of carbon nanotube confirms that the particles are crystalline in nature and hexagonal phase. An SEM and HRTEM outcome gives surface morphology of SWCNTs. The elemental composition was confirmed by EDAX. The ideal concentration of single-walled carbon nanotubes was used to design a novel electrochemical sensor for determining paracetamol (PA) using cyclic voltammetry. Electrochemical determination of paracetamol is described using a single-walled carbon nanotube modified carbon paste electrode (SWCNT/MCPE). The SWCNT/MCPE was used in this study to detect paracetamol electrochemically at pH 7.2 in a 0.2 M PBS with a scan rate of 50 mV s− 1. A single-walled nanotube modified carbon paste electrode was used to develop a sensitive and selective electrochemical technique for the detection of PA. The SWCNT/MCPE showed excellent electrocatalytic activity towards the oxidation of paracetamol in phosphate buffer solution. Therefore, with increased oxidation currents, the voltammetric responses of paracetamol at the bare carbon paste electrode are organized within cyclic voltammetric peaks.

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

The utilization of carbonaceous reinforcement-based polymer matrix composites in structural applications has become a hot topic in composite research. Although conventional carbon fiber-reinforced polymer composites (CFRPs) have revolutionized the composite industry by offering unparalleled features, they are often plagued with a weak interface and lack of toughness. However, the promising aspects of carbon fiber-based fiber hybrid composites and hierarchical composites can compensate for these setbacks. This review provides a meticulous landscape and recent progress of polymer matrixbased different carbonaceous (carbon fiber, carbon nanotube, graphene, and nanodiamond) fillers reinforced composites’ mechanical properties. First, the mechanical performance of neat CFRP was exhaustively analyzed, attributing parameters were listed down, and CFRPs’ mechanical performance barriers were clearly outlined. Here, short carbon fiber-reinforced thermoplastic composite was distinguished as a prospective material. Second, the strategic advantages of fiber hybrid composites over conventional CFRP were elucidated. Third, the mechanical performance of hierarchical composites based on carbon nanotube (1D), graphene (2D) and nanodiamond (0D) was expounded and evaluated against neat CFRP. Fourth, the review comprehensively discussed different fabrication methods, categorized them according to performance and suggested potential future directions. From here, the review sorted out three-dimensional printing (3DP) as the most futuristic fabrication method and thoroughly delivered its pros and cons in the context of the aforementioned carbonaceous materials. To conclude, the structural applications, current challenges and future prospects pertinent to these carbonaceous fillers reinforced composite materials were elaborated.

In preparation of porous carbon materials microwave oven brightening is one of the warming modes used ever. The various procedures that take place in microwave combustion process include carbonization, incitation, and recovery and thus carbon is defined. This paper compares ideal conditions of traditional warming methods, as well as their implementation potential, losses, and specifications. This porous carbon with heat treatment possesses various properties and they are well suited for energy applications which require constrained space such as hydrogen storage in solid-state and supercapacitors. The enhanced properties are chemical and thermal stability, ready availability, low framework density and ease of processability. The recent trend in class of porous carbons is Activated Carbons that are employed traditionally as adsorbents or catalyst supporters but currently, they found potent applications in fabricating for hydrogen storage materials and supercapacitors. These activated carbons are much enhanced form in class of porous carbon materials and they possess the capability to enable hydrogen economy, where the energy carrier is hydrogen. Therefore, the utility of activated carbons as a source for energy storage experiences a rapid growth at current trend and they possess significant advances. This investigation is based on detailed cost development data and electrical imperativeness applications.

Food toxins are regarded as a major source of health risks, serious illnesses susceptible to even death. These dangerous pathogens may lead to significant economic impact worldwide. The food production chain undergoes different stages like harvesting, processing, storage, packaging, distribution, and lastly preparation, and consumption. Therefore, each step is susceptible to risks of environmental contamination. Nowadays, the carbon quantum dots (CDs) are regarded as one of the most widely used hybrid carbon nanomaterials due to their different magical physical and chemical properties. The CDs have a size below 10 nm and show the fluorescent property. The CDs find vast applications in different fields like sensing, food safety, drug delivery, bioimaging, catalyst, energy conversion, etc. Compared to other available methods, the fluorescence detection techniques have low cost, easy handling, and safe operating system. There is a need for a review to compile the fluorescence properties of carbon nanodots used to detect food pathogens. This brief review is addressed in that direction and mostly focused on the synthesis of carbon dots-based fluorescence sensors for detecting pathogens and toxins in foods and beverages. The detailed mechanisms and origin of fluorescence properties of carbon quantum dots are also highlighted herewith.

This study compares the characteristics of a compact TiO2 (c-TiO2) powdery film, which is used as the electron transport layer (ETL) of perovskite solar cells, based on the manufacturing method. Additionally, its efficiency is measured by applying it to a carbon electrode solar cell. Spin-coating and spray methods are compared, and spraybased c-TiO2 exhibits superior optical properties. Furthermore, surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) exhibits the excellent surface properties of spray-based TiO2. The photoelectric conversion efficiency (PCE) is 14.31% when applied to planar perovskite solar cells based on metal electrodes. Finally, carbon nanotube (CNT) film electrode-based solar cells exhibits a 76% PCE compared with that of metal electrodebased solar cells, providing the possibility of commercialization.

This study calculated the on-site measurement (Tier 4) of greenhouse gases emitted during the production stage of major fishing periods that utilize set nets and bamboo weir fishing boats. In addition, using theoretically calculated results (Tier 1), the emission factor presented by the Intergovernmental Panel on Climate Change (IPCC) was comparatively analyzed. On average, carbon emissions for each operating period in the bamboo weir and set net were calculated to be 0.16 and 3.58 kg CO2 time -1 , respectively; and the measurement values (Tier 4) for each tool were about 4-17 times lower than their respective theoretical values (Tier 1). Significant differences were found based on engine performance. As port entry, port departure, and operating periods of the vessels show negligible variation with short distances, the operation of the vessel engine was considered as the main variable for carbon emissions in anchovy set net fishing.

본 연구는 다중벽 탄소나노튜브(MWCNT)로 보강된 복합재 구조의 동적 해석을 다루었다. Mori-Tanaka 모델을 기반으 로 MWCNT 중량 비율, 패널의 곡률, 그리고 CNT의 임의 배열이 복합재의 동적거동에 미치는 상호작용을 연구하였다. 본 연구 결과는 CNT의 부피함유비율의 변화에 따른 복합재의 유효탄성계수를 예측하는 기존 문헌결과와 비교하여 검증하였다. 수치해 석 예제는 복합재의 동적 특성을 평가함에 있어서 MWCNT 보강의 불규칙한 배열 또는 기울어진 방향으로 배치된 효과에 대한 중요성을 제시하였다.

Individual multi-walled carbon nanotubes (MWCNTs) were exposed to the electron beam of 200 kV energy and high resolution transmission electron micrographs were recorded at several time intervals. Interestingly, the nucleation of diamond nanoparticles with in the highly disordered MWCNT matrix upon electron-irradiation is observed. This happens without any assistance of high pressures and temperatures. High pressure X-ray diffraction experiments were performed on core/shell structures which suggest that even the closed structures of carbon resist any inward pressure, thereby ruling out the possibility of a hypothetical internal pressure under the electron irradiation conditions. Our experiments suggest that the transformation of graphitic carbon into diamond in the size window of a few nanometers is possible due to the stability of the diamond and a selective dissolution effect of 200 kV electrons on graphite. A mechanism for the same is proposed.

There is a need for the purification of indoor air owing to a high rate of pollution in today’s world. For this, cabin air filters (CAFs) are widely used, which requires the addition of certain adsorbents to increase the volatile organic compound (VOC) removal efficiency. However, this addition causes high-pressure resistance, which may hamper commercial applications by requiring more energy and negatively affecting fresh air delivery rate. Hence, in this study, a high-performance combined CAF (CCAF) with excellent dust and chemical filtration performance and low differential pressure was prepared using granular activated carbon (GAC)/activated carbon fiber (ACF) mixed medium. The GAC/ACF mixed medium had higher air permeability than the ACF medium of the same weight, and it exhibited similar ultrafine dust filtration performance to the ACF medium without an increase in differential pressure. In addition, the GAC/ACF mixed medium showed excellent gas removal performance without increasing differential pressure by combining the VOC removal characteristics of the GAC and ACF filter media. The improved VOC removal performance of the GAC/ACF mixed medium was due to the hybrid effect of the hierarchical pore structures of the GAC and the nearly uniform pore structures of the ACF, which resulted in a slow and increased gas adsorption by the GAC and rapid gas adsorption of the ACF.

This study assessed the changes in the fiber properties of virgin and recovered fibers from lab-scale and pilot-scale depolymerization reactors based on the thermal air oxidation-resistance characteristics. Lab-scale and pilot-scale depolymerization reactors had different depolymerization volumes. Results showed that the lab-scale and pilot-scale peak solvent temperatures were 185 °C and 151 °C, respectively. The lab-scale had highest solvent temperature rate increase because of the small depolymerization volume and the dominant role of the cavitation volume. The structural properties of the recovered and virgin fibers were intact even after the depolymerization and after the pretreatment and oxidation-resistance test. We observed 1.213%, 1.027% and 0.842% weight loss for the recovered (lab-scale), the recovered (pilot-scale) and virgin fibers because of the removal of impurities from the surface and chemisorbed gases. Further, we observed 0.8% mass loss of the recovered fibers (lab-scale) after the oxidative-onset temperature because of the “cavitation erosion effect” from the dominant of the cavitation bubbles. The “cavitation erosion effect” was subdued because of the increased depolymerization volume in the pilot-scale reactor. Therefore, negligible impact of the pilot-scale mechanochemical recycling process on the structure and surface characteristics of the fibers and the possibility of reusing the recovered fibers recycling process were characteristic. Representative functional groups were affected by the thermal oxidation process. We conducted HPLC, HT-XRD, TGA– DSC, XPS, SEM, and AFM analysis and provided an extensive discussion of the test thereof. This study highlighted how misleading and insufficient small-lab-scale results could be in developing viable CFRP depolymerization process.

A thermally conductive film can be used to laterally conduct heat along the surface of glass windows, toward its edges where a heat sink could be located, thereby reducing temperature differential between the inside and outside surfaces of the window and thus lowering cross-sectional conductive heat transfer. This technique can offer optimized thermal energy management to modern buildings without the weight and cost of double- or triple-glazed window panels. In this work, a thermally conductive film was developed using carbon dots with inherently high thermal conductivity. Nitrogen atoms were then added to the carbon dots structure to intensify high-frequency phonon that would result in higher lateral thermal conductivity. The nitrogen-decorated carbon dots (NCDs) were prepared by a simple hydrothermal synthesis of citric acid with the addition of ethylenediamine as the N source. The NCDs were added to a cellulose-based solution and drop-casted onto FTO glass resulting in a transparent, laterally thermally conductive film, that also blocks ultraviolet (UV) and high-intensity blue light radiation. The visible-light transmission of the NCDs’ film was found to be up to 65%, comparable to the commercial solar films. The lateral thermal conductivity of the NCDs’ film increases with increasing N content up to an optimum level, suggesting the role of N to “concentrate’ the high-frequency phonons responsible for effective lateral thermal conductivity of the films.

Nitrophenol sensors have garnered interest in pharmaceuticals, agriculture, environment safety and explosives. Various methods have been proposed to detect 4-nitrophenol, but nitrophenol isomers such as 2,4-dinitrophenol (DNP) and 2,4,6-trinitrophenol have been comparatively less studied. For the first time, the present work explores graphitic nanocarbon, i.e., carbon black (CB) interface for sensing of DNP. Two reduction potentials were noted at − 0.48 and − 0.64 V for o-NO2 and p-NO2 moieties, respectively, at CB/GCE. At the same time, bare GCE (glassy carbon electrode) shows a single reduction potential at − 0.7 V. The electrocatalytic effect and adsorption ability of the interface was studied from the DNP concentration effect. Scan rate and pH studies suggest that the CB acquires four electrons for NO2 reduction by the diffusion phenomenon. A broad detection range of 10–250 μM DNP with a very low detection limit of 0.13 (o-form) and 0.15 μM (p-form) was achieved using the CB interface. The real-time applicability of the fabricated sensor was evaluated using commercially available beverages with excellent recovery values. The stability, repeatability and reproducibility of the CB interface were successfully confirmed. Comparison of the sensing parameters of the developed sensor with those reported in literature reveals excellent detection limit and response time for the CB-interfaced DNP sensor, indicating its potential for environmental and commercial applications.

Acrylonitrile–butadiene–styrene (ABS) terpolymer was compounded with short carbon fiber (CF) and carbon nanotube (CNT) using a micro-extruder followed by the injection molding process. Composite samples were fabricated with loading ratios of 20 wt.% CF and 0.1, 0.5 and 1.0 wt.% of CNT. Mechanical, electrical, thermo-mechanical, thermal, melt-flow, and structural investigations of ABS-based composites were conducted by performing tensile, impact, hardness, and wear tests, conductive atomic force microscopy (AFM), dynamic mechanical analysis (DMA), thermal gravimetric analysis (TGA), melt flow rate test (MFR), scanning electron microscopy (SEM) characterization techniques, respectively. According to mechanical test data of resultant composites including tensile and impact test findings, CNT additions led to the remarkable increase in tensile strength and impact resistance for CF reinforced ABS composites. The formation of synergy between CNT nanoparticles and CF was confirmed by electrical conduction results. The conductive path in ABS/CF composite system was achieved by the incorporation of CNT with different loading levels. SEM micrographs of composites proved that CNT nanoparticles exhibited homogeneous dispersion into ABS matrix for lower loadings.

The serendipitous uncovering of carbon dot (CQDs) as budding candidate of carbonaceous nanomaterial has become now one of the hot topics in the research of material science and technology. The unique features of CQDs such as photo-physical properties, excellent biocompatibility, ease of synthesis, good aqueous dispersity, high chemical stability, and accessible functional groups for further modification make them one of the promising competitors in biological, photonic and energyrelated applications. Although some review articles on CQDs have been published, they typically cover all areas of CQDs applications, and no particular evaluation on the advancement of doped CQDs (D-CQDs) has been reported so far. In this review, we demonstrated characteristic features of D-CQDs focusing on doping strategies, discussion on recently adopted various synthesis processes, its applications and its qualitative comparison with each other. The recently developed concept on understanding the structure and optical properties of D-CQDs are also briefly described followed by their application on various fields primarily concentrated on bio-imaging and sensing applications. We also speculate its use in a variety of intriguing fields and its perspectives in near future.