본 논문에서는 국내 비내진상세 조적채움벽 RC 골조의 내진성능을 파악하기 위하여 실규모 크기의 비내진상세 조적채움벽 RC 골 조를 대상으로 정적실험을 실시하였으며, 기존 비내진상세 RC 골조 의 정적 실험결과와의 비교·분석을 통하여 조적채움벽체가 RC 골조의 내 진성능에 미치는 영향에 대하여 평가하였다. 실험 결과. 조적채움벽 RC 골조 실험체는 조적채움벽체에 의한 압축력으로 기둥, 보 , 접합부 등 골조 전체에 균열 등의 손상이 발생하였으며, 접합부 전단균열이 벌어지고 철근이 노출되면서 취성 파괴되었다. 한편, 조적체움벽 RC 골조 실 험체의 수평하중과 층간변형각 관계는 벽체 슬라이딩 균열, 기둥 균열 등으로 강성이 저하되었으며, 철근 항복이후 최대 내력에 도달하고 접합 부 균열의 확대, 철근 노출 등으로 내력이 최대 내력의 40% 정도로 저하되었다. 조적채움벽체로 인하여 기둥 상·하단 및 접합부에만 집중되던 손상이 기둥, 보, 접합부 등 골조 전체에 분산되어 발생하였으며, 기둥의 전단균열이 아닌 접합부의 전단균열의 확대로 최종 파괴되었다. 또한, 조적채움벽체로 인하여 RC 골조의 강성은 12.42배, 내력은 3.63배 증가한 반면에, 강성 증가에 따라 최대 내력 시의 층간변형각은 0.18배, 파괴 시의 변형은 절반 이하로 감소하였다.

전 세계적으로 지진발생이 빈번하고 많은 인명피해와 사회기반시설물의 피해가 발생하고 있다. 지진에 대한 보수, 보강기법에 대 한 연구가 많이 있었지만 대부분은 강성보강형태로 반복적인 하중이 구조물에 작용하면 2차적 피해가 발생할 수 있다. 따라서 강성보강이 아 닌 연성보강형태의 보수, 보강기법이 필요하다. 본 연구에서는 철근 콘크리트 기둥 부재에 적용할 수 있는 보강 공법으로써 폴리머계의 고인성 과 고연성 효과를 나타내는 경질형 폴리우레아를 내진보강용 재료로 선택하였고 재료의 열화 및 내화학적 특성에 대한 내구 성능을 평가하였 다. 내구 성능 평가는 폴리우레아의 산 환경 및 자외선 노출 시험을 실시하였고, 폴리우레아를 도포한 콘크리트의 탄산화 노출 및 동결융해 시 험을 실시하였다. 내진보강용 폴리우레아는 모든 시험을 통하여 내구성능과 저항능력이 우수한 것으로 판단되며 추후 내진 보강 재료로써 유 용하게 사용될 것으로 사료된다.

Recently, KISTEC has developed and released seismic performance eavaluation s/w for water-pipe. The purpose of this study is to introduce the functions installed in the ASAD-W and verify the reliability of the ASAD-W by applying it to actual water-pipe.

The rapid increase in frequency of earthquakes in Jeju that awakened the public concern about seismic performance of bridge columns. This research presents case studies on the evaluation of seismic performance of existing bridge columns conducted in Jeju-si, and investigates the elementary data, system of bridge structure, configuration of reinforcement steel and concrete strength of bridge columns in Jeju-si.

Recently, Earthquake occurrence in korea has become frequent, and the seismic safety of low-rise piloti buildings becomes more and more important. In this study, the differences in seismic performance between before and after reinforced by concrete filled steel tube (CFT) of low-rise central core type piloti building structures were compared.

The purpose of this study is to establish a reasonable analytical method for the estimation of overall behavior characteristic from cracking to yielding of rebar and crushing of concrete and seismic performance of reinforced concrete shear wall with high-strength reinforcing bar. A total of 8 specimens of reinforced concrete walls which have constant aspect ratio and a variety of variables such as reinforcement ratio, reinforcement yielding strength, reinforcement details, concrete design strength, section shape and whether lateral restraint hoop were selected and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the proposed constitutive equation by the authors. The mean and coefficient of variation for maximum load from the experiment and analysis results was predicted 1.04 and 8%. The mean and coefficient of variation for displacement corresponding maximum load from the experiment and analysis results was predicted 1.17 and 19% respectively. The analytical results were predicted relatively well the fracture mode and the overall behavior until fracture for all specimens. These results are expected to be used as basic data for application of high-strength reinforcing bar to design codes in the future.

By producing pre-engineered modular system in the factory, It is enable to expedite construction and can be distinguished from two types by the method resisting load. One is the open-sided modular system composed of beams and columns. The other is enclosed modular system composed of panels and studs. Of the modular systems, the open-sided modular system buildings the connection between modules are difficult due to closed member sections, and the overall strength is reduced as a result of local buckling. In this study, in order to solve these problems, a modular system with folded steel members filled with concrete are proposed. The capacity spectrum method presented in ATC 40 is used for seismic performance assessment of the proposed model structure and the structure with conventional steel members. The analysis results show that at the performance point of each model the number and rotation of plastic hinge formed in the proposed modular system are smaller than those in the conventional system. Based on this observation it is concluded that the proposed system with composite sections has superior seismic capacity compared with conventional system.

Recently, KISTEC has developed and released seismic performance eavaluation s/w for water-pipe. The purpose of this study is to introduce the functions installed in the ASAD-W and verify the reliability of the ASAD-W by applying it to actual water-pipe.

The rapid increase in frequency of earthquakes in Jeju that awakened the public concern about seismic performance of bridge columns. This research presents case studies on the evaluation of seismic performance of existing bridge columns conducted in Jeju-si, and investigates the elementary data, system of bridge structure, configuration of reinforcement steel and concrete strength of bridge columns in Jeju-si.

Recently, Earthquake occurrence in korea has become frequent, and the seismic safety of low-rise piloti buildings becomes more and more important. In this study, the differences in seismic performance between before and after reinforced by concrete filled steel tube (CFT) of low-rise central core type piloti building structures were compared.

형상비(M/VD, shear span-depth ratio)가 4.5인 축소모형의 원형기둥 실험체 3개를 제작하였다. 철근콘크리트 기둥 실험체의 단면 은 원형이고 중공단면으로 제작되었다. 철근콘크리트 기둥 실험체의 단면 지름은 400 mm, 중공 지름은 200 mm이다. 일정한 축력 하에서 반복 하중을 가력하는 준정적 실험을 수행하였다. 실험체의 주요변수는 횡방향철근비이다. 모든 실험체의 횡방향 나선철근 체적비는 소성힌지 구 간에서 0.302~0.604%의 값을 갖는다. 이 값은 도로교설계기준에서 요구하는 최소 심부구속철근 요구량의 45.9~91.8%에 해당하며, 이는 내진 설계가 되지 않은 기존 교각이나 내진설계개념으로 설계되는 교각을 나타낸다. 본 연구의 최종목적은 실험적 기초자료의 제공과 함께 성능단 계별 균열거동, 하중-변위 이력곡선, 에너지 소산 능력, 등가점성감쇠비, 잔류변형, 유효강성 등 내진성능의 정량적 수치와 경향을 제공하기 위 한 것이다. 본 논문에서는 실험결과를 통해 분석된 실험변수에 따른 실험결과들을 공칭강도, 비선형 모멘트-곡률 해석 결과, AASHTO LRFD 및 도로교설계기준(한계상태설계법)과 같은 기준들과 비교하였다.

In this paper, seismic performance of RC frames reinforced by chevron braces were evaluated. The purpose of experimental study was to increase the stiffness of RC frames. As a results, if steel bracing was reinforced in RC frames, seismic performance of RC frames would be increased.

This research was studied on seismically strengthened RC columns with Strain Hardening Cementitious Composites(SHCC). The seismic performance of the SHCC-RC composite columns in SDOF system was evaluated by the concepts of seismic performance-based design approaches; the Capacity Spectrum Method(CSM), the Direct Displacement Based Design(DDBM) and the Displacement Coefficient Method(DCM).

본 연구의 목적은 비선형 동적해석을 통한 국내 비보강 조적조의 내진성능을 평가하는데 있다. 보다 정밀한 내진성능 평가를 위해 조적벽체의 파괴모드를 고려한 비선형 이력모델을 이용하고자 하나, 선행연구의 비선형 이력모델은 정적반복가력해석에 대한 검증만이 수행 되었다. 이에 본 연구에서는 진동대실험과 동적해석 결과를 비교하여 제안한 비보강 조적조 비선형 해석모델의 신뢰성을 검증한 다음, 국내 비 보강 조적조 건축물의 비선형 동적해석을 수행하고 결과를 분석하여 내진성능을 평가하였다. 그 결과, 1층의 조적조 건축물의 경우 개구부율 에 관계없이 비교적 지진피해가 작은 반면, 2층 이상의 국내 비보강 조적조 건축물의 대부분이 국내에 발생가능한 지진에 취약하였다.

In order to understand the seismic performance of weir structure under seismic events, concrete weir structure with infinite foundations was modeled in ABAQUS. Additionally, this study conducted the three different design response spectra based on KBC 2009, ASCE 7-05, and EuroCode 8. The results from numerical analyses showed that the seismic behavior of weir structure subjected to seismic ground motions was sensitive to natural frequency and mass participation factors.

This study presented the seismic performance of weir structures with infinite foundations subjected to seismic ground motions, rather than finite soil foundation to avoid the reflection of seismic wave propagation at the mesh boundaries. The analytical model of weir structures was developed in ABAQUS　platform and then the seismic performance of concrete weir structure was evaluated through design response spectrum (KBC 2009). It was revealed that the maximum stresses obtained from infinite models was significantly increased, in comparison to the finite models.

Recently, it was found that the Vulnerability Index(VI) of Preliminary assessment for water pipelines seismic performance in domestic had lacks of correlation of detailed safety assessment. The purpose of this study is to propose a reasonable VI by analysing on correlation between existing VI and safety factor.

Structural engineers needs know-how about using nonlinear analysis softwares for seismic performance evaluation of existing building. In this study, it’s compared with several softwares, nonlinear analysis are available.