Reuse of industrial effluents through the cooling systems in a petrochemical complex was described. The partial oxidation of the effluents from the biological treatment plant was examined, using Fenton`s reagent as a pretreatment step prior to a next treatment of the effluents. Next tertiary treatment using fixed-film reactor resulted in marked reductions in COD and suspended solids. The continuous fixed-film process with Fenton oxidation pretreatment showed a 23% increase in the COD removal efficiency when compared to that without pretreatment of Fenton oxidation under the volumetric organic loading rate of 0.1 ㎏ COD/㎥/day. The Fenton oxidation treatment seemed to be a possible method for tertiary biological treatment to reduce the residual toxicity with the enhanced biodegradation of the effluents.

Continuous deodorization of malodorous sulfur compounds by Thiobacillus neapolitanus R-10 immobilized onto a polypropylene pellet was studied using a column reactor at 30℃. The maximum amounts of immobilized cells was 5.3 g/ℓ polypropylene with 5 × 7.5㎜ in pellet size, and the amounts of immobilized cells in the higher part of the column was as twice as in the lower part. The optimum pH and temperature for removal of dimethyl sulfide were 6.0 and 30℃, respectively. When 5-20 ㎕/ℓ of hydrogen sulfide and methylmercaptan were employed 98% of removal efficiency were achieved. In contrast, lower concentrations of dimethyl sulfide and dimethyldisulfide should be supplied to meet satisfactory deodorization efficiency. The immobilized cell column was successfully operated for the deodorization of mixture of sulfur compounds over 15 days without significant loss of initial activity achieving high efficiency.

White clover는 많은 장점에도 불구하고 계속방목에 대한 적응력이 낮아 존속연한이 짧은 것이 결점이다. 따라서 본 시험은 white clover 혼파초지관이에 필요한 정보를 제공하기 위하여 예취주기의 장단(7일, 14일, 28일)이 28일의 재생기간 동안 잎의 크기가 다른 white clover 품종(Osceola, Huia, S184)의 질소고정, 각부위(잎과 엽병, 포복경 및 뿌리)별 total nonstructural carbohyd-rate(TNC) 및 질소의 분배에 미치는 영향을 조사하기 위하여 온실에서 pot 시험으로 실시한 바 그 결과를 요약하면 다음과 같다. 1. TNC 함량은 포복경과 뿌리에서 예취주기를 7일에서 28일로 늘임으로써 증가하였고 대엽종인 Osceola에서 가장 높은 함량을 보인 반면, 중엽종인 Huia와 소엽종인 5184은 각부위간분배가 다른 것으로 나타났다. 2. 질소함양은 전부위에서 이상의 포복경과 뿌리의 TNC 함량과 유사한 반응을 보였다. 3. TNC 함량은 뿌리보다는 잎과 엽병 또는 포복경에서 많은 반면, 질소함량은 엽병, 뿌리, 포복경의 순으로 감소하였다. 4. 예취로 인하여 전부위의 TNC 및 질소 함량은 감소하였으나, 재생기간이 길어짐으로써 증가하는 경향이었다. 또한 예취주기에 따라 재생기간 중 각부위간 TNC 및 질소 분배에는 차이가 있는 것으로 조사되었다. 5. 질소고정은 예취주기가 7일에서 28일로 증가함으로써 증가하고 대엽종일수록 큰 것으로 나타났으며, 예취 3일후까지는 감소하다가 그 이후에는 증가하였다.

The objective of this study was to examine and compare to transient response to quantitative and hydraulic shocks which produce equal changes in mass rate of organic feed in aerobic fixed-film process. The general experimental approach was to operate the system at several growth rates under steady-state(pre-shock) conditions, then to apply step changes during day 3 in dilution rate(hydraulic shock), or feed concentration(quantitative shock) at the same organic mass loading rate. Performance was assessed in both the transient state and the new steady-state (post-shock). Shock load of different type did not produced equivalent disruptions of effluent quality for equal increases on mass loading rate. Based on effluent concentrations, a hydraulic and a quantitative shock at the same mass loading caused equal increase in total effluent COD, but the increase was primarily a result of suspended solids the hydraulic shock and COD in the quantitative shock, The time which effluent COD came to peak values were about 32∼48 hours at the low organic loads and 52∼72 hours at the high organic loads, respectively. A quantitative shock produced a much greater increase in effluent COD than did a hydraulic shock at the same mass loading. Mean and peak values of effluent concentration were increased in 2.8∼4.2 times at low organic loading rate, 5.2∼6.6 times at the high organic loading rate respectively.

This study deals with the case of a fixed floating structure(FFS) at the mouth of a rectangular harbor under the action of waves represented by the linear wave theory. Modified forms of the mild-slope equation is applied to the propagation of regular wave over constant water depth. The model is extended to include bottom friction and boundary absorption. A hybrid element approximation is used for calculation of linear wave oscillation in and near coastal harbor. Modification of the model was necessary for the FFS. For the conditions tested, the results of laboratory experiments by Ippen and Goda(1963), and Lee (1969) are compared with the calculated one from this model. The cases of flat cylinderical structures, both fixed and floating, were taken to be in an intermediate water depth.

본 연구는 생태적 생리적 특성이 다른 5가지 콩품종, 즉 조숙성의 예계7003, SS79168 및 만숙성의 동북7006, 백운콩, 장백콩을 공시하여 등숙기간중 체내성분의 변동 즉 식물체 각 기관 전 질소의 경시적 변동과 품종간 차이가 등숙중기 이후의 질소 고정활성의 급속한 감퇴와 어떤 관련성이 있는가를 구명하기 위하여 지상부 및 지하부 각 기관 전질소 농도를 경시적으로 조사함과 아울러 Acetylene 환원능(ARA) 등 조사를 실시하였다. 특히 공시품종중 예계 7003는 노화가 지연되는 특성(delayed leaf senescence, DLS)을 갖는 품종이다. 조사는 Fehr et al.(1977)의 콩생육단계의 구분에 따라서 협신장기(R4), 입비대기(R6), 성숙시기(R7) 등과 일부 품종은 착협시(R3) 및 R4.5, R6.5, R7.5와 같은 중간적 생육단계에도 보족적인 조사를 실시하였는데, 얻어진 결과를 요약하면 다음과 같다. 1. 각기관 질소량과 p-ARA간에는 정의 상관관계가 인정되어 질소고정활성이 높을수록 질소량은 많았다. 2. 각기관 질소농도와 s-ARA간의 상관은 R4에서 정, R6에서 부의 상관을 보였다. 3. s-ARA와 숙주의 Age나 질소 이외의 영양조건 등 영향을 미치는 요인이 많아서, R4에서는 고질소농도가 엽신의 광합성 activity를 높여서 s-ARA에 촉진적으로 작용하였고, R6에서는 엽신의 광합성 activity가 저하하고 질소화합물의 분해가 진행되고 있기 때문에 부의 관계가 인정된 것이라고 판단되었다.

In this paper, the equations calculating GDOP are induced in Hyperboic, and Spherical Navigation System, respectively, The GDOP diagram shows that the DGOP in the inner region of Beacons is similar each other, but the GDOP of Hyperboic Navigation System is much larger than that of Spherical Navigation System due to GDOP in the outer region of Beacons. The authors propose the algorithm estimating the pulse starting time using the Hyperboic Navigation System, and prove that if Navigation use the Spherical Navigation System by adopting the proposed Algorithm -in this case, "Pseudo Sperical Navigation System" - in the outer region where GDOP is becoming large, the position errors can be reduced.e reduced.