This research proposes an optimal flushing operation technique in an effort to prevent secondary water pollutions and accidents in aged pipes, and to improve the cleaning effect of unidirectional flushing. Water flow directions were analyzed using EPANET 2.0, while flushing and air scouring experiments in forward and reverse directions were performed in the field. In 42 experiments, average residual chlorine concentration and turbidity were improved after cleaning compared to before cleaning. It was found that even when the same cleaning method was used, further improvement of cleaning effect was possible by applying air injection and reverse direction cleaning techniques. By means of one-way ANOVA(Analysis of variance), it was also possible to statistically verify the need of actively utilizing air injection and reverse direction cleaning. Based on correlation between turbidity and TSS, the total amount of suspended solids removal was estimated for 874 flushing operations and 194 air scouring operations. The result showed that air scouring used more discharge water than flushing by an average of 4.9 m3 yet with larger amounts of suspended solids removal by an average of 145.9 g. The result of analysis on turbidity values from 887 flushing operations showed low cleaning effect of unidirectional flushing for the pipes with diameters over 300 mm. In addition, the turbidity values measured during cleaning showed an increasing tendency as pipe age increased. The methodology and results of this research are expected to contribute to the efficient maintenance and improvement of water quality in water distribution networks. Follow-up research involving the measurement of water quality at regular time intervals during cleaning would allow a more accurate comparison of discharge water quality characteristics and cleaning effects between different cleaning methods. To this end, it is considered necessary to develop a standardized manual that can be used in the field and to provide relevant trainings.

목적 : 이 설문 연구는 의료민영화와 안경원의 법인화 문제에 대한 일반 소비자의 인식도를 조사하고 그 결과를 안경사 집단에 대한 선행연구와 비교·분석하는 것을 목적으로 하였다. 방법 : 2018년 5월부터 6월까지 서울·경기 지역에서 150명의 일반 소비자를 대상으로 의료민영화와 안경원의 법인화 문제에 대하여 대면설문조사를 실시하고 응답 결과를 통계분석 하였다. 결과 : 일반 소비자 집단은 의료민영화 문제에 대하여 일관되게 부정적인 인식을 나타내었으나, 안경원의 법인화 문제에 대해서는 부정적인 인식이 많지 않고 중립적인 응답의 비율이 매우 높았다. 안경사 집단에 대한 유사한 설문 조사 결과와 비교했을 때, 의료민영화에 대한 인식은 두 집단이 비슷했으나 안경원 법인화에 대한 인식은 큰 차이를 보였다. 결론 : 반 소비자 집단의 안경원 법인화 문제에 대한 부정적인 인식도가 높지 않으므로, 안경사 집단은 일반 소비자 집단을 대상으로 안경원 법인화 문제에 대한 적극적인 홍보를 강화할 필요가 있다.

The present study was conducted to investigate the differences in managed farming practices, including low-intensive farming, duck farming, and golden apple snail farming, in a rice ecosystem by comparing terrestrial arthropod communities. A total of 75 species from 70 genera belonging to 43 families in 11 orders were identified from 9,622 collected arthropods. Araneae, Hemiptera, and Coleoptera were the richest taxa. Collembola was the most abundant, followed by Diptera, Hemiptera, and Araneae. Bray- Curtis similarity among the farming practices was very high (76.7%). The biodiversity of each farming practice showed a similar seasonality pattern. The richest species group was the predators, followed by the herbivores. The species richness and diversity of ecologically functional groups among the farming practices were not statistically significant, except for the abundance of predators in golden apple snail farming. The biodiversity seasonality of ecological functional groups in each farming practice showed similar patterns. The biomass of Araneae, Hemiptera, Coleoptera, and Diptera was greater than the other taxa, in general. The biomass of each ecological functional group showed little difference and the biomass fluctuation patterns in each farming practice were almost the same. Collectively, the community structures and biodiversity of terrestrial arthropods among the farming practices in the present study were not different. The present study may contribute to sustain rich biodiversity in irrigated rice fields and to advanced studies of food webs or energy flow structures in rice fields for ecological and sustainable agriculture.

The purpose of this study is to analyze the factors influencing consumers purchasing of domestic, imported and craft beer through AHP analysis and to provide implications for marketing for each beer market. In this study, theories and calculations related to AHP analysis were thoroughly examined and selection attributes were determined by referring to existing theories. A total of 164 consumers who have purchased beer were the target of the survey. The results were analyzed by AHP analysis and the differences were analyzed. It was confirmed that the domestic, imported, and craft beer had the highest weight in the taste in the first layer. At this time, we can confirm that imported, and craft beer has a relatively high weight on taste and domestic beer has a relatively high weight on brand image. We also found that design and advertising images do not have a significant impact on beer selection. Even though it is study on beer, we can find people have different preference between their orgin. In this study, it is possible to show what type of factors does the beer manufacturing and distribution company should concentrate on by analyzing factors that consumers consider, unlike other studies focusing on consumption status of existing beer.

본 연구의 목적은 플랭크 운동 시 세라밴드 적용 유·무에 따른 신체 근육의 근활성도를 비교·분석하는데 있었다. 본 연구의 대상자는 건강한 20대 남성 12명을 대상으로 실시하였고(연령, 21.75±0.57 세; 신장, 173.33±1.34cm; 체중, 65.92±1.64kg; 신체질량지수, 21.93±0.46kg/m2), 풀 플랭크, 엘보우 플랭크, 사이드 플랭크, 및 리버스 플랭크 운동은 4가지의 세라밴드(사용 안함(WT), 빨간색(RT), 파란색 (BT), 은색(ST))를 적용하여 수행하였으며, 표면전극 부착 부위는 척추기립근(ES), 삼각근(DA), 외복사근 (EO), 복직근(RA), 대퇴직근(RF), 광배근(LD), 대흉근(PM), 및 대퇴이두근(BF)으로 설정하였다. 본 연구의 결과는 다음과 같다. 풀 플랭크 동작 시 ES, DA의 근활성도는 WT적용 시 가장 높게 나타났고(p<.05), EO, RA, RF, PM의 근활성도는 ST적용 시 가장 높게 나타났다(p<.05). 엘보우 플랭크 동작 시 ES, DA의 근활성도는 WT적용 시 가장 높게 나타났고(p<.05), RF, PM의 근활성도는 ST적용 시 가장 높게 나타났다 (p<.05). 사이드 플랭크 동작 시 ES, EO, RA, RF, LD, PM, BF,의 근활성도는 ST적용 시 가장 높게 나타 났다(p<.05). 그리고 리버스 플랭크 동작 시 DA, EO, RA, RF, LD, PM, BF,의 근활성도는 ST적용 시 가장 높게 나타났다(p<.05). 따라서 본 연구의 결과는 향후 플랭크 운동 적용 시 효과적인 신체근육을 강화시 키기 위한 훈련프로그램의 자료가 될 것으로 기대된다.

Since the implementation of the Odor Prevention Act in 2005, the number of odor complaints has continuously increased due to the increased interest in the living environment. The current odor control means is a concentrationbased method for the source of odor. That is why there is a difference between the odor sensitivity and the result of the odor measurement in the odor damage area. The government is considering the introduction of the grid method, which is the odor management method of Germany, as the method of odor investigation in the odor damage area in the second comprehensive Odor Prevention Policy (2019-2028). The grid method is receptor-based odor measurement method that investigators use to judge odors in the field, task that expensive and requires substantial manpower and time. To study an odor measurement method that is suitable for domestic conditions, this study compared the correlation between results based on the odor frequency concept grid method around the livestock facilities and the result of ammonia concentration measured by passive air sampler. The correlation coefficient (R) that is between the frequency of odor per spot for the entire odor and the ammonia concentration that was measured by passive air sampler was 0.65 which is relatively good. Among the entire odor detected by the grid method, the correlation coefficient (R) between the odor frequency selected only for livestock odor and the ammonia concentration was significantly increased to 0.80. In addition, the correlation between odor exposure (ECPexist) and the ammonia concentration for the overall odor was 0.81 (linear) and 0.86 (index). If only the livestock odors were selected, the correlation between odor exposure and the ammonia concentration was very high at 0.96 (linear) and 0.95 (index).

이 연구에서는 국내 설계기준인 KBC 2016, 미국 기준 ASCE 7-16, 국제 표준 ISO 4354:2012의 풍직각방향 및 비틀림 풍하중을 비교 분석하였다. 고층건물 설계를 위한 상세 산정식과 그 적용 기준, 풍하중 하중조합 등을 비교하였다. KBC는 ISO와 유사한 유도과정을 가지지만, 풍직각방향 풍하중 산정 시 사용된 풍동실험 데이터의 차이로 인해, 변장비가 큰 경우 와류 재부착에 의한 파워 스펙트럼의 2차 피크를 ISO가 약간 크게 산정하고 구조물과의 공진으로 인해 ISO가 하중을 60% 정도 크게 산정한다. KBC와 ISO의 고층건물에서의 비틀림 풍하중은 동일하다. ASCE는 고층건물을 위한 상세식을 제시하지 않지만, 중저층 건물에서는 풍방향 하중에 비례하는 하중조합 형태로 반영한다. KBC와 ISO에서도 ASCE 처럼 중저층 건물에서 편심에 의한 비틀림 풍하중을 반영할 필요가 있다.

이 연구에서는 국내 설계기준인 KBC 2016, 미국 기준 ASCE 7-16, 국제 표준 ISO 4354:2012의 고층건물 설계를 위한 풍방향 풍하중을 비교 분석하였다. 각 기준에서 사용하는 기본풍속, 풍방향 풍하중의 가스트영향계수 산정 과정과 이를 구성하는 평균 성분, 비공진 성분, 공진 성분의 차이를 비교 분석하였다. ISO에서는 10분 평균 풍속과 3초 가스트 풍속에 의한 두 가지 하중 산정법을 사용하며, 고층건물에서는 10분 평균 풍속에 의한 산정법이 하중을 6% 더 크게 산정한다. 10분 평균 풍속을 사용하는 KBC 풍하중은 ISO 평균과 거의 일치하였으며. 3초 가스트 풍속을 사용하는 ASCE 7-16은 ISO 피크보다 6% 작게 나타났다. 이 연구에서는 이러한 차이를 줄이기 위한 개선사항들을 제시하였다.