검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 50

        23.
        2014.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The study discusses remote control torch system that is equipped with CO2 double wire reel. The welding machine is 30m away from the wire feeder at the industrial site and the feeder is three to five meters away from the torch. Accordingly, the welders cannot control the current and voltage that meets the welding condition during work when they are working at a place that prevents them from seeing the control panel such as inside a vehicle or tank or at a far work site. They also have no choice but to stop working to change the wire reel when it is completely burned out. Such work suspension resulting from frequent moves to adjust current and voltage as well as replace the wire and subsequent cooling causes welding defects. The study produced a remote control torch equipped with double wire reel by simplifying and streamlining the existing CO2 functions to reduce the troubling issue. The remote control torch equipped with double wire reel and the existing CO2 /MAG welding torch were applied as V-groove butt in the vertical position using 9mm rolled steel for SM50A welding structure. After completion of welding, the condition of welded surface beads went through visual inspection as well as radiographic inspection to analyze the welding quality inside the welded part. The study also evaluated reduction of welding defects, cost saving, the replacing performance against the existing commercial welders and the effect on possible compatibility
        4,000원
        24.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In GMAW welding used mostly at the scene of a welding industry, welders can not see control panels in internal welds of vehicles and tanks, and can not adjust the current and voltage properly during the welding, which is caused by distance from the working area. Therefore, welders have to move to control the current and voltage by stopping welding. This, however, can result in the welding defects by momentary cooling. In this research related to the existing GMAW welding methods and the manners with the remote control torch their performances were evaluated by comparing and analyzing the welds of V-type butt using SM50A 6 mm and welding structural rolled steels. As the result of conducting the visual inspection and bending test one by one against the V-type butt welds, the amount of spatter by the remote control torch method showed reducing effects about five times lower and it had a performance that did not affect the weld defects by displaying suitable effects on the bending test of welds. Consequently, the experimental study on the possibility of replacement and compatibility with the existing commercial welder for the remote control torch was performed.
        4,000원
        31.
        2009.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        At this study, we are developing a possible control system through remote monitoring for fire protection in various chemical factory facilities. It's possible to do real time confirmation of a normal operation presence of the various equipment installed in a chemical factory through the internet network at a fire fighting head office, an area fire department and a chemical factory situation room using this remote monitoring control system. When occurring, abnormal operation is the remote monitoring control system, which can check this immediately and notify the situation room administrator. After it was tested using developed remote monitoring control system, the remote monitoring for which the internet network was used confirmed possible.
        4,000원
        32.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        현재 근해어업은 기피 산업으로 어민들의 고령화 및 감소로 인력을 구하기 어렵고 어로활동을 하기 위해서는 일반적으로 2명 이상이 1조로 작업이 진행된다. 따라서 숙련되지 못한 사람들이 조를 이루어 작업을 할 경우 의사전달에 시차가 생기고 한사람은 배의 조종에 매달리므로 작업의 능률이 떨어진다. 따라서 레저나 소형어선에서 1인이 선박을 조종하면서 작업이나 레저를 즐길 수 있는 선외기의 원격제어 시스템 연구의 필요성이 대두되었다. 본 연구에서는 작업의 효율을 높이고 인력을 절감 할 수 있는 선외기의 원격제어시스템에 관한 연구를 수행하였다. 선외기는 엔진, 조타기, 정 역전 및 중립 기어박스가 하나의 시스템으로 구성되어 있다. 소형 선외기에 이 세 가지의 제어를 직류전동기를 이용하여 위치제어와 속도제어를 하였고, 마이크로컨트롤러를 이용하여 조타기와 엔진회전수 제어를 프로그램화 하여 어민들이 작업을 하면서 동시에 원하는 조종을 할 수 있도록 시스템을 설계 제작하였다. 시운전결과 전속에서 좌 우현 조타 성능이 명령대로 잘 움직였다.
        4,000원
        34.
        2004.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        선박의 안전운항을 위해서 설치되어 있는 많은 수의 등대를 관리하기 위해서는 유지비가 과다하게 지출되고 있는 것이 현재의 상황이다. 이러한 이유로 등대를 원격 제어하는 시스템이 실제 운용되고 있지만, 위성 망이나 RF 망을 이용하기 때문에 과다한 통신비용이 발생하고, 단지 측정 데이터만을 전송하므로 실제 등대의 상태를 파악하기 어렵다. 따라서, 본 논문에서는 도서지역까지 확대된 이동 통신기술인 CDMA방식을 이용하여 등대를 양방향으로 원격 제어하고 감시하는 등대 원격 제어 시스템을 구축하여 그 효용성음 확인하였다.
        4,000원
        36.
        2003.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 공주대학교 천문대 16인치 반사망원경의 원격 제어 시스템을 구축하였다. 이 시스템은 닫힌 루프 시스템이다. 전자제어부는 한국천문연구원에서 개발한 TCS-196를 활용했고, 기계부는 직접 개발하였다. 이 원격제어망원경의 마운트 모델링 후 얻은 지향정밀도는 시간각 방향에서는 ±50", 적위 방향에서 ±40"이며, 추적 정밀도도 약 1"/min정도였다. 이러한 예비관측 결과는 본 시스템이 천문학 연구 및 교육에 적당함을 의미한다.
        4,200원
        38.
        1991.12 구독 인증기관 무료, 개인회원 유료
        본(本) 연구(硏究)는 인체(人體)에 해(害)로운 농약(農藥)으로 부터 운전자(運轉者)를 보호(保護)하기 위하여 무인(無人) 스피드 스프레이어를 개발(開發)할 목적(目的)으로 수행(遂行)하였으며 무선(無線) 전파(電波) 리모콘에 의한 원격제어(遠隔制御) 시스템을 개발(開發)하기 위하여 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 234채널, 16명령을 발신(發信)할 수 있는 VHF 대 전파(電波) 리모콘을 제작(製作)하여, 스피드 스프레이어의 원격제어(遠隔制御)에 편용가능(便用可能)하였다. 2. 시판(市販)되고 있는 무선전화기(無線電話機)의 방식(方式)인 DTMF방식(方式)을 채용(採用)한 무선 리모콘을 사용(使用)할 경우 시판 무선전화기(無線電話機) 사용(使用)이 가능(可能)하여 송수신(送受信)기의 별도(別途) 제작(製作)이 필요 없는 잇점이 있었다. 3. 무선(無線) 전파(電波) 리모콘과 원칩 마이크로 컴퓨터를 이용(利用)하여 염가(廉價)이고 컴팩터한 원격조종(遠隔操縱) 조향장치(操向裝置) 및 원격조종(遠隔操縱) 변속장치(變速裝置), 원격조종(遠隔操縱) 약액(藥液) 살포장치(撒布裝置) 등(等)의 원격제어(遠隔制御) 시스템 제작(製作)이 가능(可能)하였다.
        4,000원
        39.
        1991.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        원격측정에 의한 어군의 탐지범위를 넓히기 위하여 기존 net recorder를 4개의 진동자로 사용할 수 있는 멀티비임 시스템으로 바꾸어, 이들을 직선배열과 평면배열하여 어군탐지범위의 확대폭과 어군의 위치측정에 대한 원격제어 실험을 행하고 그 유용성을 검토.분석한 결과는 다음과 같다. 1. 직선배열에 의한 표적의 탐지범위는 수심과 진동자 간격의 증가함에 따라 증가하였으며, 4개의 진동자를 배열하면 4배까지 확대할 수 있었다. 2. 진동자를 직선배열하여 정치망입구에서 어군을 관측한 결과 길그물에 아주 가까운 2.5~3.5m의 수층으로 많이 입망되었으며, 창그물에 가까운 3.5~4.5m의 수층으로도 어느 정도 입망되었다. 3. 표적의 실제위치와 진동자의 평면배열에 의하여 구한 위치오차는 표적의 수심이 1m, 1.5m, 2m일 때 각각 5.9~27.1cm, 3.2~28.9cm, 3.5~25.8cm였으며, 68.3% 확률원의 반경은 각각 14.6cm, 17.7cm, 17cm였다. 4. 평면배열에 의하여 헛통에서 어군의 행동을 관측한 결과 조류의 방향과 정반대 방향으로 거슬러 유영하면서 자루그물에 입망되는 경향을 나타내었다. 5. 직선 및 평면배열에 의한 어군, 수온, 해저 등과 같은 수중정보는 1,800m까지 원격측정이 가능하였으며, 본 실험의 경우 발신기의 수심이 3m이상이면 어느 곳에서라도 원격측정이 가능하였다.
        4,000원
        40.
        2018.12 KCI 등재 서비스 종료(열람 제한)
        In the midst of disaster, such as an earthquake or a nuclear radiation exposure area, there are huge risks to send human crews. Many robotic researchers have studied to send UGVs in order to replace human crews at dangerous environments. So far, two-dimensional camera information has been widely used for teleoperation of UGVs. Recently, three-dimensional information based teleoperations are attempted to compensate the limitations of camera information based teleoperation. In this paper, the 3D map information of indoor and outdoor environments reconstructed in real-time is utilized in the UGV teleoperation. Further, we apply the LTE communication technology to endure the stability of the teleoperation even under the deteriorate environment. The proposed teleoperation system is performed at explosive disposal missions and their feasibilities could be verified through completion of that missions using the UGV with the Explosive Ordnance Disposal (EOD) team of Busan Port Security Corporation.
        1 2 3