원자력 발전소에 지진격리장치를 설치하여 내진성능을 향상시킬 수 있다. 그러나 지진격리장치의 적용으로 지반과 구조물 사이에서 큰 상대 변위가 발생하게 된다. 따라서 지진격리된 구조물과 일반 구조물을 연결하는 연결배관시스템의 경우 지진리스크가 증가할 수 있다. 따라서 이러한 배관시스템의 지진취약도를 분석할 필요가 있다. 본 연구에서는 지진취약도 분석 을 위해 지진격리된 APR1400 원자력발전소와 주증기관을 대상으로 지진취약도를 분석하였다. 주증기관은 지진격리된 nuclear island의 보조 건물과 터빈 건물을 연결하는 인터페이스 배관이다. 지진취약도 분석을 위한 파괴모드는 누출관통균열로 정의하였다. 누출은 실험결과와 수치해석을 통해 손상지수로 정량화하여 취약도 분석을 위한 파괴기준으로 사용하였다. 파괴기준의 변동에 의한 취약도 곡선의 변동성을 확인하기 위하여 손상지수의 최솟값, 최댓값, 평균값 및 중앙값을 파괴기준으로 하여 지진취약도 곡선을 작성하였다.

확률론적 지진취약도 평가는 구조물 혹은 기기의 손상확률을 각 취약도 변수별 조합을 통해 이루어진다. 지진취약도로부터 구해지는 2개 이상 기기의 동시손상확률 계산은 기존에는 각 기기의 손상확률을 독립으로 가정해왔다. 하지만 기기별 손상확률에 상관성이 있으며, 이를 평가한 결과 상관성에 따라 동시손상확률이 변화할 수 있는 결과를 보였다. 이 지진상관성을 무시하면 비보수적인 결과가 나오고 따라서 이를 고려해서 계산되어야 한다. 이 연구에서는 지진상관계수를 해석적으로 평가하기 위해 몇 가지 확률 변수를 선정하여 각 변수별로 혹은 통합하여 평가하고 그 차이를 비교했다. 그리고 단순화된 모델과, 복잡한 모델에 대한 상관계수 차이도 비교 하였다. 이들 방법에 따른 상관계수의 결과와 차이를 분석했다. 그 결과 각 변수별로 평가하는 것과 통합하여 평가할 때 변수별 영향의 차이에 따라 상관성이 변화함을 확인하였고, 모델이 단순할수록 상관성이 높아짐을 확인하였다.

Seismic fragility was assessed for non-seismic reinforced concrete shear walls in Korean high-rise apartment buildings in order to implement an earthquake damage prediction system. Seismic hazard was defined with an earthquake scenario, in which ground motion intensity was varied with respect to prescribed seismic center distances given an earthquake magnitude. Ground motion response spectra were computed using Korean ground motion attenuation equations to match accelerograms. Seismic fragility functions were developed using nonlinear static and dynamic analysis for comparison. Differences in seismic fragility between damage state criteria including inter-story drifts and the performance of individual structural members were investigated. The analyzed building had an exceptionally long period for the fundamental mode in the longitudinal direction and corresponding contribution of higher modes because of a prominently insufficient wall quantity in such direction. The results showed that nonlinear static analyses based on a single mode tend to underestimate structural damage. Moreover, detailed assessments of structural members are recommended for seismic fragility assessment of a relatively low performance level such as collapse prevention. On the other hand, inter-story drift is a more appropriate criterion for a relatively high performance level such as immediate occupancy.

The methodology classifying structural types of concrete buildings in the existing seismic fragility functions is too simple to estimate the fragility of existing residential buildings and neighborhood living facilities, especially those below five stories. Their structural types are dependent on information contained in the building register such as main use, total floor area, story, permission date, and first story floor area of the individual building. All of this information is not considered for classifying types in the existing functions; therefore, the goal of this study was to suggest a methodology that classifies structural types of concrete buildings by utilizing such information. The results of this study showed that the suggested methodology can classify structural types better than the existing methodology. Nevertheless, there is still a need to simplify the methodology because fragility estimation demands quickness rather than accuracy.

지진 하중에 의해 피해를 받는 교각의 보강을 위한 방법론과 다양성에 대한 연구가 활발히 진행되었지만, 단자유도에 대한 비선형 정적 분석에 대한 연구가 주로 수행되었으며, 교각을 구성하는 재료적 특성만이 변수로 간주되었다. 그러나, 교 각의 기하학적 요소와 보강 수단의 관계성에 관한 연구는 수행되지 않았다. 이에 본 연구에서는 CFRP 재킷을 사용하여 캘리포 니아에 존재하는 비 내진 상세 콘크리트 교량 교각을 보강하고 형상 변화에 따라 (교각 직경, 전단 경간 비, 보강 재킷의 길이) 교량 교각의 지진 취약성 곡선 도출하고 내진 성능을 평가하였다. 상기의 목표를 달성하기 위해 Opensees 프로그램를 사용하여 문헌에서 인용할 수 있는 실험체를 모델링하고 반복 하중을 가하여 결과 비교를 통해 해석방법의 적절성을 결정하였다.

본 논문에서는 OpenSees 프로그램을 이용한 콘크리트 교량의 지진취약성 분석 방법에 대한 고찰을 제시한다. 교각 및 휨 부재 분산 비선형(distributed plasticity) 요소를 적용한 해석모델을 활용하여 지진에 대한 응답을 구하고 이를 통계적으로 처리하여 확률론적 지진취약성 분석을 수행한다. 응답 통계는 세기가 같은 지진파의 집단을 단계별로 scaling하는 stripe 방 법과 다양한 세기를 가진 지진파 집단을 선정하는 cloud방법을 적용하고 이 두 방법에 의한 분석결과의 차이를 비교한다. 한계 상태에는 교각의 휨변형과 교좌장치의 변위를 기준으로 산정한 다단계 한계상태를 적용하고, 여러 가지 한계상태를 취합한 시스템 취약성을 도출한다. 지진응답의 통계적 처리 방법과 교량의 손상 정의가 지진취약성 곡선에 주는 영향을 고찰한다.

최근 발생한 경주 및 포항 지진은 고주파 영역의 성분이 많이 포함된 지진파로 구조적 요소 뿐만아니라 비구조적 요소에 피해가 많이 발생하였다. 비구조적 요소 중 전기 캐비닛은 발전소의 발전 시스템 컨트롤러를 보관하는 함으로써 전기 캐 비닛의 피해는 안정적인 에너지 공급의 중단과 화재 등의 2차적인 피해로 확장될 수 있다. 따라서 본 연구에서는 전기 캐비닛- 앵커 시스템의 유한요소 모델을 구축하고 검증하여 세계 각지에서 발생한 지진파 적용을 통한 지진 취약도 평가를 수행하고자 한다. 전기 캐비닛의 유한요소 모델의 경우 공진탐색 결과의 타겟 주파수와 약 1%의 오차가 발생하였으며 선설치 앵커의 유한 요소 모델은 실험결과와 비교하였을 때 초기 강성 및 최대 하중점이 잘 일치하는 것으로 나타났다. 0.2g, 0.5g, 0.8g, 1.2g로 스케 일을 변화시켜 시간이력해석을 수행하였으며 해석결과를 바탕으로 확률론적 안전성 평가인 지진 취약도 평가를 수행하였다. 0.2g 스케일의 시간이력 해석결과 경주 지진을 적용하였을 때 앵커에서 발생한 응력은 280.15MPa로 가장 크게 발생하였으며 고 주파 지진에 민감하게 반응하는 것으로 나타났다. 앵커의 응력을 한계상태로 지진취약도 분석 시 0.2g와 0.5g 사이에서 기울기 가 급격히 변하였으며 캐비닛 최상단의 변위를 한계상태로 지진 취약도 분석 시 Z축 변위 보다 X축 변위에 대해 민감하게 반응하는 것으로 나타났다

A methodology to assess seismic fragility of a nuclear power plant (NPP) using a conditional mean spectrum is proposed as an alternative to using a uniform hazard response spectrum. Rather than the single-scenario conditional mean spectrum, which is the conventional conditional mean spectrum based on a single scenario, a multi-scenario conditional mean spectrum is proposed for the case in which no single scenario is dominant. The multi-scenario conditional mean spectrum is defined as the weighted average of different conditional mean spectra, each one of which corresponds to an individual scenario. The weighting factors for scenarios are obtained from a deaggregation of seismic hazards. As a validation example, a seismic fragility assessment of an NPP containment structure is performed using a uniform hazard response spectrum and different single-scenario conditional mean spectra and multi-scenario conditional mean spectra. In the example, the number of scenarios primarily influences the median capacity of the evaluated structure. Meanwhile, the control frequency, a key parameter of a conditional mean spectrum, plays an important role in reducing logarithmic standard deviation of the corresponding fragility curves and corresponding high confidence of low probability of failure (HCLPF) capacity.

화력발전소 구조물 중 하나인 보일러 강구조물은 물탱크가 올라가게 되는 중요한 설비지만 그 중요성이 비해 지진에 대한 안전성 평가에 대한 연구가 미비하다. 본 연구에서는 취약도 곡선을 도출하고자 16개의 지진파에 12개의 PGA값을 선정하고 포 항지진을 포함해 총 200회의 동적 비선형 해석을 수행하였다. 강재의 인장, 압축응력과 강구조물의 상대변위를 측정하였다. 강재 재료적 특성의 경우 변형은 발생하였으나 파괴는 발생하지 않았고, 상대변위의 경우 한계점에 못 미치는 변위가 발생하였다. 취약도 곡선 도출결과 국내의 지진구역 구분 및 지역계수를 기준으로 강재의 재료적 변형(400MPa)에서는 인장이 38%, 압축이 62.5%로 변형이 발생하였고, 상대변위는 0%의 확률로 한계점을 넘었다. 이러한 보일러 강구조물에 대한 취약도 곡선은 대상구조물에 대한 한 계상태를 판별하는 정량적 근거와 지진에 대한 안전설계시 활용될 수 있다.

Seismic performance of ordinary reinforced concrete shear wall systems commonly used in high-rise residential buildings is evaluated. Three types of shear walls exceeding 60m in height are designed by performance-based seismic design. Then, incremental dynamic analysis is performed collapse probability is assessed in accordance with the procedure of FEMA P695. As a result, story drift, plastic rotation, and compressive strain are observed to be major failure modes, but shear failure occur little. Collapse probability and collapse margin ratio of performance groups do not meet requirement of FEMA P695. It is observed that critical wall elements fail due to excessive compressive strain. Therefore, the compressive strain of concrete at the boundary area of the shear wall needs to be evaluated with more conservative acceptance criteria.

In order to increase the seismic safety of nuclear power plant (NPP) structures, a technique to reduce the seismic load transmitted to the NPP structure by using a seismic isolation device such as a lead-rubber bearing has recently been actively researched. In seismic design of NPP structures, three directional (two horizontal and one vertical directions) artificial synthetic earthquakes (G0 group) corresponding to the standard design spectrum are generally used. In this study, seismic analysis was performed by using three directional artificial synthetic earthquakes (M0 group) corresponding to the maximum-minimum spectrum reflecting uncertainty of incident direction of earthquake load. The design basis earthquake (DBE) and the beyond design basis earthquakes (BDBEs are equal to 150%, 167%, and 200% DBE) of G0 and M0 earthquake groups were respectively generated for 30 sets and used for the seismic analysis. The purpose of this study is to compare seismic responses and seismic fragility curves of seismically isolated NPP structures subjected to DBE and BDBE. From the seismic fragility curves, the probability of failure of the seismic isolation system when the peak ground acceleration (PGA) is 0.5 g is about 5% for the M0 earthquake group and about 3% for the G0 earthquake group.

A total of 594 reservoirs (17%), which are managed by KRC, equipped with earthquake-resistant facilities whereas remaining ones did not. In addition, reservoirs were placed without the effect of geological structures (i.e., fault and lineament). Therefore, development on technique for alleviating the potential hazards by natural disasters along faults and lineaments has required. In addition, an effective reinforcement guideline related to the geological vulnerabilities around reservoirs has required. The final goal of this study is to suggest the effective maintenance for the safety of earth fill dams. A radius 2 km, based on the center of the reservoir in the study area was set as the range of vulnerability impacts of each reservoir. Seismic design, precise safety diagnosis, seismic influence and geological structure were analyzed for the influence range of each reservoir. To classify the vulnerability of geological disasters according to the fault distribution around the reservoir, evaluation index of seismic performance, precise safety diagnosis, seismic influence and geological structure were also developed for each reservoir, which were a component of the vulnerability assessment of geological disasters. As a result, the reservoir with the highest vulnerability to geological disasters in the pilot district was analyzed as Kidong reservoir with an evaluation index of 0.364. Within the radius of 100km from the epicenter of the Pohang earthquake, the number of agricultural infrastructure facilities subject to urgent inspections were 1,180 including reservoirs, pumping stations and intakes. Four reservoirs were directly damaged by earthquake among 724 agricultural reservoirs. As a result of the precise inspection and electrical resistivity survey of the reservoir after the earthquake, it was reported that cracks on the crest of reservoirs were not a cause of concern. However, we are constantly monitoring the safety of agricultural facilities by Pohang aftershocks.

In recent years, the number of earthquakes has increased worldwide. There has been an extreme increase on the Korea Peninsula, which is considered a safety zone for earthquakes. In particular, in the event of earthquakes, most structures on the Korea Peninsula are severely damaged, because most are not designed to withstand them. Damage to and destruction of civil structures, such as bridges, nuclear facilities, and dams, is worse than that of other structures. It is necessary to evaluate and predict the extent of damage by earthquake magnitude, as the magnitude of earthquakes is increasing as well as the frequency. A major feature of the occurrence of earthquakes is uncertainty. For this reason, it is necessary to adopt a stochastic approach, and studies using this approach are increasing. However, although there have been several studies on bridges and nuclear facilities, there have been few studies on probabilistic seismic risk evaluation for multi-functional weirs. Thus, this study presents 3D multi-functional weirs and performs a time history analysis by using LS-DYNA, a general structure analysis program. Probabilistic seismic fragility assessment is conducted by Monte Carlo simulation.

The friction pendulum system(FPS) is a kind of seismic isolation devices for isolating structures from an earthquake. To analyze the effect of friction materials used in the friction pendulum system, fragility analysis of LNG tank with seismic isolation system was conducted. In this study, titanium dioxide(TiO2) nanoparticles were incorporated into polyvinylidene fluoride(PVDF) matrix to produce friction materials attached to the FPS. The base moment of the concrete outer tank and the acceleration of the structure were evaluated from different mixing ratios of constituents for the friction materials. The seismic fragility curves were developed based on two types of limit state. It is confirmed that evaluation of combined fragility curves with several limit states can be applied to select the optimum friction material satisfying the required performance of the FPS for various infrastructure.

Many studies are conducted in several fields for fragility analysis of structures or elements which is a probabilistic seismic safety analysis in consideration with uncertainty of seismic loading. It is hard to directly conduct fragility analysis for an infrastructure with social importance due to its size. Therefore, a fragility analysis for an infrastructure mainly conducted in element level or conducted with scaled model built in accordance with similarity law. In this article, fragility analysis for prototype and scaled model of reinforced concrete column was conducted with numerical models which had been updated by the results of shaking table test and pseudo dynamic test. As a result, response stress from the numerical analysis result of prototype model was higher than that from scaled model due to different stiffness ratios between steel and concrete. However, the probability of failure for scaled model was higher than that for prototype model because failure criteria for scaled model was down due to similarity law. Also it was evaluated that probability of failure by using log normal standard deviation of response stresses by spectrum matched accelerograms was more reliable than probability of failure by using existing coefficient of variation normally used.

In this study, refined finite element (FE) analyses intended to evaluate the capacity of the existing water purification plant structures against seismic force are conducted with an aim to predict possibility generating tension crack and compression crushing. The FE models for three types of main plant structures were constructed to take ground condition, boundary condition, and water interaction into consideration for advanced simulation. The nonlinear dynamic analyses were performed by using ground motion data which have been used for seismic design. Both compression crushing and tention crack, which are distributed over concrete plant structures during peak ground acceleration (PGA), are investigated by analyzing failure possibility controlled with the strain limits. After observing FE analysis results, it is possible to predict tenstion cracking which can be found at some parts of the main structure.