PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.

PURPOSES : Derive a road pavement design method using Geocells, aim to derive a road pavement design and construction method suitable for the characteristics of the Bangladesh region METHODS : To assess long-term performance during road construction in Southeast Asia using Geocells, field tests and numerical analysis are conducted to verify stability. RESULTS : A total of 12 displacement measurements were conducted during the field tests, confirming an average load of 15.75 kN and an average displacement of 0.542mm. Inverse analysis was performed to obtain the properties of Geocell combined with compacted soil. The numerical analysis results confirmed that the insertion of Geocell provides better stability compared to the case with only compacted soil. CONCLUSIONS : Based on field tests and numerical analysis, a road design plan suitable for the Southeast Asian environment was proposed. A preliminary test section was selected in the Comilla region of Bangladesh, and test construction has been completed. Subsequent evaluations of the structural performance by soil layer in the test construction area will be conducted to develop a Geocell road pavement method, taking into consideration the characteristics of the Bangladesh region.

algorithms for deriving and analyzing retroreflectivity influence factors through regression analysis. METHODS : An experimental road lane was created to examine the trends of retroreflectivity and LiDAR intensity values, and a controlled indoor experiment was conducted to identify influencing factors. The optimal algorithm was developed by regression analysis of the experimental data. RESULTS : The significance probability (P-value) through SPSS linear regression analysis was 0.000 for measured height, 0.001 for perpendicular angle, 0.157 for vertical angle, and 0.000 for LiDAR intensity, indicating that measured height, vertical angle, and LiDAR intensity are significant factors because the significance probability is less than 0.05, and vertical angle is not significant. The NNR regression model performed the best, so the measurement data with height (1.2m, 2m, 2.2m) and vertical angle (11.3°, 12.3°, 13.5°) were analyzed to derive the optimal LiDAR Intensity measurement height and vertical angle. CONCLUSIONS : For each LiDAR measurement height and vertical angle, the highest correlation between LiDAR Intensity and retroreflectivity was found at a measurement height of 1.2 meters and a vertical angle of 12.3°, where the model learning accuracy (R2) was the highest.

PURPOSES : The purpose of this study is to statistically analyze the meteorological factors that contribute to the formation of road surface icing based on actual cases of icing accidents and provide directions for improving icing evaluation criteria. METHODS : In this study, we collected cases of domestic road icing accidents by searching news articles with the keyword ‘icing collision accidents’. Subsequently, we determined the latitude, longitude, and altitude of accident locations using satellite map service. We applied the Inverse Distance Weighting (IDW) method and temperature lapse rate to estimate meteorological data at each location. Finally, statistical analysis was conducted for temperature, humidity, and precipitation occurrence using probability density functions. RESULTS : As a result, road icing accident data points with identifiable location coordinates were collected. Among these, temperature, humidity, and precipitation occurrence from Automated Weather Stations (AWS) data were selected for analysis. During the process of correcting meteorological factors using the Inverse Distance Weighting (IDW) method, the optimal Weighting Exponent (p) that minimizes the error was determined and applied. The results showed that accidents occurring in the morning indicated the highest accident occurrence rate. The average temperature at the time of the accidents was -1.4°C, with a humidity level of 85.1%. Precipitation was observed at the time of the accident in 19 cases. CONCLUSIONS : Icing on pavement can occur not only under extreme weather conditions but also under typical meteorological conditions. Typically, icing can occur when the relative humidity is above 70%. Accordingly, for future improvements in the evaluation criteria for icing-prone areas by the Ministry of Land, Infrastructure and Transport, it is possible to incorporate the temperature and humidity ranges that generally lead to icing, taking into account climate characteristics.

PURPOSES : Construction cost estimates are important information for business feasibility analysis in the planning stage of road construction projects. The quality of current construction cost estimates are highly dependent on the expert's personal experience and skills to estimate the arithmetic average construction cost based on past cases, which makes construction cost estimates subjective and unreliable. An objective approach in construction cost estimation shall be developed with the use of machine learning. In this study, past cases of road projects were analyzed and a machine learning model was developed to produce a more accurate and time-efficient construction cost estimate in teh planning stage. METHODS : After conducting case analysis of 100 road construction, a database was constructed including the road construction's details, drawings, and completion reports. To improve the construction cost estimation, Mallow's Cp. BIC, Adjusted R methodology was applied to find the optimal variables. Consequently, a plannigs-stage road construction cost estimation model was developed by applying multiple regression analysis, regression tree, case-based inference model, and artificial neural network (ANN, DNN). RESULTS : The construction cost estimation model showed excellent prediction performance despite an insufficient amount of learning data. Ten cases were randomly selected from the data base and each developed machine learning model was applied to the selected cases to calculate for the error rate, which should be less than 30% to be considered as acceptable according to American Estimating Association. As a result of the analysis, the error rates of all developed machine learning models were found to be acceptable with values rangine from 17.3% to 26.0%. Among the developed models, the ANN model yielded the least error rate. CONCLUSIONS : The results of this study can help raise awareness of the importance of building a systematic database in the construction industry, which is disadvantageous in machine learning and artificial intelligence development. In addition, it is believed that it can provide basic data for research to determine the feasibility of construction projects that require a large budget, such as road projects.

Asphalt concrete, which is used as a road base material, accounts for >90% of a road pavement. A huge amount of waste concrete and waste asphalt concrete aggregates are generated. Recently, carbon neutrality is promoted across all industries for sustainability. Therefore, to achieve carbon neutrality in the asphalt concrete industry, waste asphalt concrete aggregates should be recycled. Additionally, road base materials are prepared using additives to ensure structural stability, durability, and economic efficiency. In this study, recycled asphalt concrete aggregates were used to evaluate the physical properties of road base materials according to the type of polymer additive and mixing method, and the applicability of road base each material was evaluated. Results showed that when the acrylate-based polymer additive was mixed, the uniaxial compressive strength was 30% higher. Furthermore, the compressive strength of the split mix was improved by ~29% compared to the total mix.

PURPOSES : This study intended to derive a methodology that can evaluate water splash caused by distress on the road surface based on experimental methods and to present quantitatively by analyzing the impact on road users. METHODS : Through literature review, the current problems of road pavement and drainage facility standards, the factors of road splash caused by puddle was selected to measure damage. Field measurements were conducted by setting different conditions for each factors and setting different conditions based on the hypothesis. In addition, water splash by surface distress type and puddle was measured to analyze using statistical techniques from correlation to multi-regression. RESULTS : The maximum and effective distance due to road splash increases as the driving speed, regardless of vehicle load and tyre type. Splash was measured according to the type of road distress to analyze the correlation between the influencing factors, and there was a weak correlation between the width and length of the puddle, depth and the effective distance. In addition, the interaction analysis showed that there was an interaction between the width of the water hole and the depth of puddle. Moreover, based on the multi-regression analysis, it was not statistical significant. This is judged to that the number of data samples used for this analysis is limited because the diversity of puddle conditions cannot be set differently for each type of distress. CONCLUSIONS : Since the distress of depending on the size, depth and shape of the road surface, it is necessary to calculate it and present maintenance standards, so this results present an experimental methodology that can intuitively evaluate damage cased by unestablished puddle. From this results, this is expected to be used as a quantitative indicator to evaluate the satisfaction of road users as a functional performance according to road surface condition.

The asphalt concrete industry, accounting for >90% of road pavement, is a crucial contributor to construction waste. This study focuses on the recycling of asphalt concrete recycled aggregates, which currently exhibits a low rate. We investigated the application of these aggregates, combined with hardener and mixing water, in the development of ecofriendly road base materials using circular aggregates. Results revealed that the 13-mm asphalt concrete recycled aggregates met all quality standards. However, the 25-mm aggregates did not conform to the reclaimed asphalt content standard; however, they met other quality standards. Moreover, the experimental results for the hardener and mixing water indicated compliance with all quality standards.

이 연구는 임도 개설 전·후 년차별로 식물상과 식생의 변화를 분석하고 관리 방안을 제공하기 위하여 전북 무주군 설천면 미천리에 소재한 민주지산 임도를 대상으로 임도 개설 전년도인 2012년부터 임도 개설 후 2022년까지 7차례에 걸쳐 수행되었 다. 임도 개설 조사구간 내의 식물군락은 북서사면에서 신갈나무군락, 남서사면에서 굴참나무군락과 일본잎갈나무군락으로 구분되어 남서사면과 북서사면에서 군락의 차이를 보였다. 임도 개설 전·후 년차별로 식물상의 변화는 임도 개설 전인 2012년 도 총 66분류군(44과 59속 51종 13변종 2품종)에서 2015년도에는 207분류군(71과 153속 176종 27변종 4품종)으로 141분 류군이 증가하였고, 2022년도에는 278분류군(78과 172속 242종 1아종, 31변종 4품종)으로 212분류군이 증가하였다. 특히 임도절토사면과 임도연접사면부의 조사구에서는 년차적으로 높은 식피율과 새로운 분류군의 증가를 보였는데, 이는 임도 개설에 따른 광량의 급격한 증가와 귀화식물 및 1년생 초본류의 유입으로 인해 일어난 현상으로 사료된다. 임도 개설 10년후 연차적으로 조사된 식생 조사 결과를 보면, 임도 개설 초년도에는 식피율과 종수가 빠른 속도로 증가하다가 일정 기간이 경과 하면 식피율과 출현 종수는 줄어들고 안정된 숲이 형성되어 우점종의 비율이 증가하였다. 특히 임도연접사면에서 관목층 과 초본층을 살펴보면, 임도 개설 직후 몇 년간은 초본층의 식피율이 현저히 증가하다가 시간이 경과 할수록 초본층의 피도는 감소하고, 관목층의 피도가 현저히 증가하였다. 그리고 임도산지사면에서는 초본층과 관목층의 피도는 현저히 감소하고, 아교목층과 교목층의 피도가 증가하였다.

The importance of urban green space creation is increasingly recognized as the most realistic and efficient approach for fine dust mitigation in urban areas. Particularly considering the characteristics of domestic cities, the application of buffer green spaces along roads can maximize the efficiency of fine dust reduction without the need for separate green space creation. Accordingly, this study analyzed the fine dust mitigation effects based on the types of plantings in the central dividers and roadside trees in Jeonju City, Jeollabuk-do. To do this, we controlled various external variables of urban space and considered the planting arrangement types in the central dividers, carrying out the analysis using a CFD simulation. The simulation results confirmed that the central dividers with plantings demonstrated more effective ultrafine dust reduction than those without. Moreover, the arrangement of roadside trees showed a greater ultrafine dust reduction effect when adopting a multilayered structure compared to a single layer. Based on these findings, we concluded that installing both trees and shrubs simultaneously in the central dividers and along roads was effective for ultrafine dust mitigation. On this basis, we quantified the dust reduction effects of plants in urban street environments and proposed planting guidelines for roadside green spaces to improve air quality.

PURPOSES : This study proposes a framework for promoting future expressway remodeling projects by reviewing similar overseas cases and comparing them with current Korean expressway remodeling projects. METHODS : Based on a literature review, this study examines the major issues in expressway remodeling projects and proposes the development of a framework for establishing and promoting such projects. This framework provides detailed guidance by categorizing the project into legal system adjustments, traffic management plans, and social consensus. RESULTS : The diagnosis of issues in domestic expressway remodeling projects revealed significant problems in conceptual aspects, criteria for project evaluation, formulation of traffic diversion strategies, and deficiencies in related legal frameworks. To address these issues, a framework for advancing future remodeling projects was established based on the results of overseas case studies. CONCLUSIONS : As roads deteriorate, the demand for remodeling projects to restore them increases. However, the current implementation of remodeling projects lacks systematic procedures. This study serves as foundational research for establishing an environment conducive to the smooth progress of such projects. By initiating subsequent research, conditions for the smooth progress of remodeling projects are expected to be established.

PURPOSES : Traffic volume, an important basic data in the field of road traffic, is collected from traffic survey equipment installed at certain locations, which sometimes results in missing traffic volume data and abnormal detection. Therefore, this study presents various missing correction techniques using traffic characteristic analysis to obtain accurate traffic volume statistics. METHODS : The fundamental premise behind the development of a traffic volume correction and prediction model is to set the corrected data as the reference value, and the traffic volume correction and prediction process for the outliers and missing values in the raw data were performed based on the set values. RESULTS : The simulation results confirmed that the algorithm combining seasonal composition, quantile AD, and aggregation techniques showed a detection performance of more than 91% compared with actual values. CONCLUSIONS : Raw data collected due to difficulties faced by traffic survey equipment will result in missing traffic volume data and abnormal detection. If these abnormal data are used without appropriate corrections, it is difficult to accurately predict traffic demand. Therefore, it is necessary to improve the accuracy of demand prediction through characteristic analysis and the correction of missing data or outliers in the traffic data.

목적 : 본 연구는 시뮬레이터 훈련이 척수손상 환자의 운전시뮬레이터 도로 주행시간과 주행조작 능력에 미치는 영향을 알아보고자 하였다. 연구방법 : 본 연구는 단일사례실험연구 AB설계로 진행되었으며, 기초선 3회기, 중재기 10회기를 적용하였다. 기초선 3회, 중재기 5회 도로주행코스(중급) 수행 시 운전시간, 주행조작 능력 자료가 수집되었으며, 연구결과 분석을 위하여 시각적 분석 방법과 평균 ±2*표준 편차를 사용한 양적 분석을 동시에 사용하였다. 결과 : 연구대상자 3명의 총 주행시간은 기초선 A보다 중재기 B에서 3분 내외의 감소하였고, 세 명 모두에서 통계학적으 로 의미있는 주행 능력의 향상이 확인되었다. 주행조작능력 또한 오류 점수가 감소하였고, 첫 번째 참여자와 세 번째 참 여자의 경우 그 변화가 통계학적으로 유의하였다. 결론 : 본 연구에서 연구대상자의 총 주행시간 및 수행 오류의 감소가 확인되어 운전시뮬레이터 훈련의 효과가 있었다. 이 와 같은 결과는 운전시뮬레이터 훈련의 적용 가능성을 뒷받침 한다.