In the present study, the focus is on the analysis of the effect of the mold dimensions on the temperature distribution of a die during plasma activated sintering. The temperature distribution of a cylindrical mold with various dimensions was measured using K-type thermocouples. The temperature homogeneity of the die was studied based on the direction and dimensions of the die. A temperature gradient existed in the radial direction of the die during the plasma activated sintering. Also, the magnitude of the temperature gradient was increased with increasing sintering temperature. In the longitudinal direction, however, there was no temperature gradient. The temperature gradient of the die in the radial direction strongly depended on a ratio of die volume to punch area

캘리포오니아 홍합(Mytilus californianus)의 용존 Cd, Se, Zn의 흡수율에 대한 개체 크기와 수온의 영향을 평가하기 위하여 방사성 동위원소를 이용한 실험을 수행하였다. 세 개의 크기 구배(0.07, 0.24 and 0.73g; 육질부 건중량)를 갖는 홍합의 용존 금속 흡수율과 여수율은 동시에 4개의 온도 구배(3, 8, 13 and 21˚C)에서 측정되었다. 세 원소의 흡수율은 개체 크기가 증가함에 따라 유의하게 감

본 시험은 제주도 화산회토양에서 식용 Canna의 구경크기에 따른(10, 15, 20, 25cm) 생육특성 및 수량을 구명하기 위하여 2003년 5월 20일부터 11월 24일까지 시험하였다. 초장은 구경크기 l0cm 파종에서 78.8cm 이었던 것이, 구경크기가 커짐에 따라 점차적으로 커져서 구경 25cm 크기에서는 129.1cm 커졌다(). 구경크기에 따른 엽장, 엽폭, 엽수, 분지수, 경직경 및 구경수는 초장반응과 비슷한 경향이었다. 생초수량, 구경

The possibility to decrease agglomeration of Cu nano powders and their separation during pulsed wire evaporation (PWE) process was investigated by controlling the working gas system, i.e., the design of the gas path, the type and pressure of the atmospheric gas. As a result, it was possible to choose the optimal design of the gas path providing large specific surface area and high degree of separation of the synthesized Cu nano powders. It was also shown that an Ar+10∼50 mixture can be used in production of Cu nano powders, which do not react with nitrogen.

본 논문은 정하중하에서 김테스트를 사용하여 아스팔트 콘크리트의 소성변형과 변형강도가 공시체에 크기에 미치는 영향에 대해 연구하였다. 2가지 골재(편마암, 화강암)와 6가지 아스팔트를 사용하여 총14개의 밀입도 혼합물을 사용하였다. 마샬 배합설계를 통해 최적아스팔트 함량을 구하고 결정된 최적아스팔트 함량으로 마샬공시체 (S=10cm)와 자이레토리 공시체(S=15cm)를 제작하여 마샬안정도시험, 휠트래킹시험, 개발된 김테스트(Kim test)를 수행하였다. SAS 분석을 통하여 공시체의 지름이 김테스트의 결과에 중요한 변수가 아닌 것을 알았으나 공시체의 두께는 KD에 주용한 변수가 되는 것을 알았다. KD값에 y값이 사용되어 영향을 미치는 것으로 판단되었다. 공시체의 두께를 6.6cm 이상으로 제작하여 김테스트에 적용 할때에는 마샬안정도에서와 같이 y 값에 따른 보정계수를 사용하거나 시험시 6.6cm 미만으로 제작하여야 할 것이다. 향후 보정계수 사용에 관한 연구도 가능할 것으로 판단된다.

High temperature deformation behavior of activated sintered W powder compacts was investigated. The compression tests were carried out in the temperature range between 900 and 110 at the strain rate of . The sintered specimens of Ni-doped submicron W powder compacts showed decrease in W grain size with increasing the Ni content. As the result, the flow stress was significantly increased with increasing the Ni content. We obtained Ni-activated sintered W compacts with the relative density of 94 l％and the average grain size of less than 5. A moderate true strain up to 0.60 was obtained without fracture even at 110 with the strain rate of for the activated W compact despite adding the 1.0 wt％Ni to submicron W powder.

The electrical and thermal conductivity of W-Cu composites were investigated as a function of the W-particle size and W-W contiguity. Powder mixtures were prepared by ball milling or mechanical alloying process, and then sintered at various temperatures. The electrical conductivity of sintered composite was increased with decreasing W grain size. Dependence of electrical conductivity on the W grain size was explained by the W-W contiguity concept. The thermal conductivity was increased with increasing the temperature up to but decreased at the temperature above Also, thermal conductivity value was influenced by the W particle size. Change of thermal conductivity in W-Cu composites was discussed based on the observed microstructural characteristics and theoretical considerations.