검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 176

        41.
        2016.04 구독 인증기관 무료, 개인회원 유료
        The load-end slip relation of the steel-concrete decks is formulated by Newmark theory. Using the proposed load-end slip relation model, a simple bond model, which can be used to evaluate the behavior of the steel-concrete decks, is proposed. The steel-concrete decks are analyzed by finite element analysis with the aid of the proposed bond model. In the finite element analysis, the shear connectors between the steel plate and the concrete are modeled by a number of spring elements. The results of the finite element analysis with the proposed bond model are fairly correlated with the experimental results of the full-size model. This study furthermore indicates that, if the proposed bond model is properly used in the analysis of steel-concrete composite deck, the behavior of the composite deck can be easily analyzed without the aid of the full-size experiment.
        3,000원
        42.
        2016.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Bond stress between cast-in-place ductile fiber reinforced cementitious composites and CFRP plank were experimentally analyzed. As failure shape, the mixture of failure between CFRP plank and epoxy, and failure between concrete and epoxy was shown. In case of RFCON from the suggested simple bond slip relationship, the maximum average bond stress was 5.39MPa, the initial slope was 104.09MPa/mm, and the total slip length was 0.19mm. PPCON showed the maximum average bond stress of 4.31MPa, the initial slope of 126.67MPa/mm, and the total slip length of 0.26mm, while RFCON+ appeared to have 8.71MPa, 137.69MPa/mm, 0.16mm. PPCON+ had 6.19MPa maximum average bond stress, 121.56MPa/mm initial slope, and 0.34mm total slip length. To comprehend the behavior of composite structure of FRP and concrete, local bond slip relation is necessary, and thus a simple relation is suggested to be easily applied on hybrid composite system
        4,000원
        43.
        2015.11 구독 인증기관·개인회원 무료
        금속 유기 골격체(Metal Organic Framework, 이하 MOF) 종류의 하나인 제올라이트형 이미 다졸레이트 골격체(Zeolitic Imidazolate Framework, 이하 ZIF) 중 ZIF-8은 Zn 금속이온과 imidazole 유기 리간드의 결합으로 이루어져 있다. 본 연구에서는 여러 종류의 용매에서 합성된 ZIF-8의 1차 결정과 2차 입자의 형성이 용매가 가진 특성에 영향을 받는 것을 확인하였다. HBD(hydrogen bond donation) 값이 큰 용매에서 합성된 ZIF-8의 1차 결정은 HBD 값이 작은 용매에서의 것보다 크기가 컸고, 용매의 유전상수의 값이 작을수록 2차 입자의 크기가 큰 ZIF-8이 합성되었다.
        44.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        오늘날 지구온난화를 줄이기 위한 노력으로 온실가스 저감 기술 개발에 대한 노력이 정부차원에서 이루어지고 있으며 그 일환으로 국내에서는 2006년부터 자동차용 경유에 바이오디젤이 혼입되고 있다. 비록 일부 품질 기준상의 개선사항이 남아 있고 대부분의 원료를 수입에 의존하고 있다는 점에서 제한요소가 있음에도 2013년 기준 년간 400kton를 생산하고 있으며 향후 신재생에너지 연료 혼합의무화 제도(RFS)가 시행되면 그 생산양은 더욱 증가할 것으로 예상되는바 원료 다변화를 통한 원료 불균형 해소와 이에 따른 적절한 연구 개발이 필요하다. 본 연구에서는 신규 바이오디젤 원료로 검토되고 있는 라우릭산 메틸에스터(C12:0 FAME) 중심의 팜핵유(PKO, Palm Kernel Oil)와 코코넛유 유래 바이오디젤을 대상으로 국내 품질기준 중 차량 연소계통과 저온성능에 문제를 일으킬 수 있는 글리세린 함량 분석과 관련하여 기존 시험방법(KS M 2412)의 적용 가능성을 조사하였다. 이를 바탕으로 기존 분석조건에서 발생되는 카프릭산 메틸에스터(C10:0 FAME)와의 피크겹침, 총글리세린 도출관련 계산평형상수 등에 대한 개선 사항을 도출하고 보다 다양한 원료를 이용한 바이오디젤 내 글리세린 분석 가능한 시험방법 개발 가능성을 검토하였다.
        4,600원
        45.
        2015.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 CFT 구조의 강관과 내부 충전 콘크리트 간 복합거동을 유한요소해석 시 적절하게 반영하기 위해 강관과 콘크리트 간 부착 슬립관계 묘사를 위한 알고리즘을 제시하였다. 내부 충전 콘크리트에 축방향 하중 발생 시, 강관과 콘크리트 간 마찰로 인해 강관으로 하중이 전달되며, 이에 따른 강관 슬립량과 힘의 평형관계를 통해 등가강성을 통해 부착관계를 파악할 수 있다. 실제 원형 CFT 부재의 부착응력 실험을 통해 측정된 수직 및 수평 방향 응력 분포 결과와 제안된 해석 기법을 통해 산정된 응력 분포의 비교를 통해 제안된 해석 기법의 타당성을 검증하였다. 또한 비선형 유한요소해석 시 강관과 콘크리트의 부착 거동 묘사에 따라 CFT 기둥의 거동 특성에 영향을 미치게 되므로 축방향 하중이 작용하는 CFT 부재 실험결과와 제안된 부착-슬립 모델을 반영한 유한요소해석 결과의 하중-변위 곡선 관계 비교를 통해 제안된 기법의 적합성을 검증하였다.
        4,000원
        46.
        2015.03 구독 인증기관·개인회원 무료
        More than sixty percent of highways in Korea were constructed with concrete pavement to carry the heavy traffic loads due to the economic development of this country. The service life of some pavements are close to the end, therefore, they requires the maintenances, rehabilitations and reconstructions to improve their structural performances.According to the similarity of material properties to the concrete pavement, bonded concrete overlay isa good rehabilitation technique used steadily in Korea. However, it is recently reported that the bonded concrete overlays in some highways expose the early distresses and it is assumed that the poor bonding is a cause of this problem. Additionally, the poor bonding of bonded concrete overlay is caused by the bond strength that is less than the bond strength criterion. The pre-investigation of various concrete overlays is conducted in laboratory to determine the possible influence factors reducing the bond strength and it indicates that there are two possible factors affecting the bond strength: the concrete overlay types and the substrate conditions. The study investigates the vulnerable factor between the two factors based on theevaluation of the in-situ bond strength data of bonded concrete overlay gathered from some highways in Korea. The bond strength data is collected from two different application areas: the new constructionand the rehabilitation projects. The new construction and the rehabilitation projects used Latex-modified Concrete (LMC) and Ultra-rapid Hardening Latex-modified concrete (URH-LMC), respectively as the concrete overlay. The evaluation of in-situ bond strength is to determine the percentage of unacceptable bond strength in each projectto study the effect of different types of concrete overlay. Moreover, the percentage of bonding failure modes having the bond strengths less than the criterion is also measured to study the effect of substrate condition.As a result, substrate condition is the vulnerable factor affecting the poor bonding and causing the early distresses in bonded concrete overlay.
        47.
        2015.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 글로벌금융위기와 유럽재정위기에 따라 PIIGS 국가들의 국채스프레드에 미치는 영향과 신흥시장 국 가의 거시경제지표가 국채수익률에 미치는 영향을 분석하였다. 또한 한국의 국채시장에 대한 외국인투자자의 국 적별 채권투자 행태를 결정하는 요인을 분석하고, 외국인투자가 국내 국채시장에 어떠한 영향을 미치는지를 분석 하였다. 주요 연구 결과는 다음과 같다. 첫째, 유럽재정위기와 관련된 구제금융 지원관련 부정적인 뉴스는 독일 국채수익률 대비 PIIGS 국가들의 국채스프레드를 상승시켰다. 또한 금융취약성의 증가, 글로벌위험도 스프레드 를 상승시켰다. 둘째, PIIGS 국가와 신흥시장 국가의 거시경제지표, 특히 GDP 대비 정부부채 비율의 상승 또는 재정수지의 악화는 국채수익률의 상승을 가져왔다. 또한 미국 국채수익률의 상승에 따른 유동성위험 전이효과와, 순수기대가설 내지 인플레위험의 국채수익률 반영 현상도 나타났다. 셋째, 한국 국채에 투자한 외국인의 국적별 로 미국 투자자는 차익거래 유인과 국채의 유동성위험을 중시하는 반면, 유로존과 중국 투자자는 한국의 국가신 용위험을 중시하는 것으로 나타났다. 넷째, 외국인투자자의 단기 채권 순매수의 경우에만 국내외 이자율 차이와 유의한 양(+)의 관계를 나타내서, 국내 채권수익률의 상대적인 상승 내지 가격 하락이 외국인 매수를 가져오는 것으로 보인다. 다섯째, 미국 및 유로존 투자자의 국채 순매수 증가는 국채수익률의 유의한 하락을 가져왔다. 여 섯째, 외국인투자자의 만기별 순매수 변화는 단기 국채 순매수의 경우에만 유의하게 단기, 중기, 장기 등 모든 만 기의 국채수익률 변화와 유의한 음(-)의 관계가 나타났다.
        6,600원
        48.
        2014.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymermodified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of 15℃, 25℃, and 35℃. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of 25℃, 30℃, and 35℃. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.
        4,000원
        49.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : Bonded concrete overlay is a favorable maintenance method since the material properties are similar to existing concrete pavements. In addition, bonded concrete overlay has advantage of structural performance since the overlay layer and the existing pavement perform as a monolithic layer. It is important to have suitable bond strength criteria to secure the performance of bonded concrete overlay. This study aimed to investigate the factors influencing bond strength characteristics between existing concrete pavement and overlay material. METHODS: Bond strength between overlay and existing pavement are measured and analyzed for various conditions such as the type of overlay materials, compressive and flexure strength of overlay and existing pavement, and deterioration status of existing pavement. RESULTS: The strength of overlay material does not significantly influence the bond strength. The overlay of ultra-rapid hardening cement generally gives low bond strength. However, ultra rapid hardening polymer modified concrete gives robust bond strength. The deterioration of existing concrete significantly decrease the bond strength. CONCLUSIONS: Bond strength of bonded concrete overlay highly depends on condition of existing concrete pavement rather than overlay material.
        4,000원
        50.
        2013.04 구독 인증기관·개인회원 무료
        The Adhesion method is general to reinforce steel structures using FRP(Fiber reinforced Plastic) material. Until recently in many studies, the adhesion method is being utilized. Most of the problem of this method have been eliminated. The bond performance is not enough due to the delaminate of epoxy between FRP and steel. In order to improve the problem, a bolt tighting, FRP sheet wrapping is to evaluation the degree of bond performance improvement in study.
        51.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: In Korea, rapid maintenance of distressed concrete pavement is required to prevent traffic jam of the highway. Asphalt concrete overlay has been used as a general maintenance method of construction for aged concrete pavement. AC overlay on existing concrete pavements experience various early distresses such as reflection crack, pothole and rutting, due to different physical characteristics between asphalt overlay and existing concrete pavement. Bonded concrete overlay(BCO) is a good alternative since it has advantages that can reduce various distresses during the service life since overlay material has similar properties with existing concrete pavements. Recently, BCO which uses the ultra rapid harding cement has been applied for maintenance of highway. BCO has advantage of structural performance since it does monolithic behave with existing pavement. Therefore, it is important to have a suitable bond strength criteria for securing performance of BCO. Bond strength criteria should be larger than normal tensile stress and horizontal shear stress occurred by traffic and environmental loading at bond interface. Normal tensile stress and horizontal shear stress need to estimated for the establishment of practical bond strength criteria. METHODS: This study aimed to estimate the bond stresses at the interface of BCO using the three dimensional finite element analysis. RESULTS: As a result of this study, major failure mode and maximum bond stress are evaluated through the analysis of normal tensile stress and horizontal shear stress for various traffic and environmental load conditions. CONCLUSIONS: It was known that normal tensile stresses are dominated by environmental loading, and, horizontal shear stresses are dominated by traffic loading. In addition, bond failure occurred by both of normal tensile stresses and horizontal shear stresses; however, normal tensile stresses are predominated over horizontal shear stresses.
        4,800원
        52.
        2012.04 구독 인증기관·개인회원 무료
        Rehabilitation of existing steel structure attached to a steel because cross-section is generally raising. But when the area of reinforcement increases, also increases the weight of steel can cause degradation of the operations. In addition, welding process cause discomfort which due to the interference of other process. To replace the existing method, there are researches and applications for civil steel structures on the outside. In this study, bond performance of FRP and Steel were tested to reinforce steel structures by using AFRP as well as CFRP.
        54.
        2009.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        철근 콘크리트 부재에서 부착강도는 콘크리트와 보강근 사이에 중요한 요소 중 하나이다. 본 연구는 인발실험을 통해 AFRP 보강근의 부착강도에 대하여 실험하고, AFRP 보강근과 이형철근의 부착특성을 비교하여 나타내었다. 묻힘 길이와 보강근의 직경이 실험의 변수로 사용되었으며, 실험을 통해서 AFRP 보강근의 부착응력-미끌림 관계 및 파괴양상을 평가하였다. AFRP 보강근의 부착응력-미끌림 관계는 이형철근과 비슷한 양상을 보였으며, 보강근의 직경이 증가할수록 인발하중은 증가하나 부착응력은 비슷한 결과를 보였다. AFRP 보강근의 부착강도는 이형철근의 약 54%에 달하는 것으로 나타났다.
        4,000원
        55.
        2007.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        건축물의 고층화, 대형화에 따라 기둥이 부담해야할 하중이 증대되고, 이로 인한 기둥단면적의 증대에 효율적으로 대처하기 위해 CFT(콘크리트 충전강관)기둥의 형식을 개발하게 되었다. CFT기둥은 이질재료로 구성된 복합구조형식으로, 역학적 거동을 규명하기 위해 많은 연구가 이루어지고 있다. 본 연구는 원형과 각형의 CFT기둥에 있어서 콘크리트 코어와 강관, 두 이질재료간의 접촉면 부착응력에 대한 해석적 연구로서 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 shear-connector의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면의 역학적 특성에 대한 개선된 해석기법을 제시하고자 한다.
        4,000원
        56.
        2006.09 구독 인증기관·개인회원 무료
        We found that the """interface reaction between Ni-based alloy bond, diamond, and steel core is very critical in bond strength of diamond tool. None element from metal bond diffuses into the steel core but the Fe element of steel core was easily diffused into the bond. This diffusion depth of Fe has a great effect on the bonding strength. The Cr in steel core accelerated the Fe diffusion and improved the bond strength, on the other hand, carbon decreased the strength. Ni-based alloy bond including Cr was chemically bonded with diamond by forming Cr carbide. However, the Cr and Fe in STS304 were largely interdiffused, the strength was very low. The Cr passivity layer formed at surface of STS304 made worse strength at commissure in brazing process.
        57.
        2006.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서는 적층단면법에 기초하여 단조하중 또는 반복하중을 받는 철근콘크리트 보 및 기둥 부재의 비선형 해석모델이 제안되었다. 완전부착 가정을 토대로 하고 있는 적층단면법은 콘크리트와 철근 사이의 부착슬럽 거동을 고려하지 못한다는 고전적 비선형 해석법과는 달리, 균열 발생시 철근을 따라 발생되는 부착슬립 거동을 힘의 평형관계와 변위의 적합조건으로 정량화하고, 그 결과로부터 철근의 강성을 보정해줌으로써 반영하도록 하였다. 이는 적층단면법에서 추가 자유도(double node)를 도입하지 않고 부착슬립효과를 고려할 수 있다는데 그 의의를 둘 수 있을 것이다. 나아가 제안된 방법에 의한 해석결과와 실험결과와의 비교를 통해, 제안된 방법은 부착슬립 거동에 의한 강성저하(stiffness degradation)를 동반하는 철근콘크리트 보 및 기둥 부재의 균열거동을 효과적으로 고려할 수 있음을 검증하였다
        4,500원
        58.
        2005.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        건축물이 고층화, 대형화 되어감에 따라 기둥이 부담해야할 내구성이 커진다. 이런 요구로 인하여 콘크리트 충전강관기둥의 형식을 개발하게 되었고, 역학적 거동을 규명하기 위해 연구가 이루어지고 있다. 본 연구는 실험에서 규명하기 힘든 콘크리트코어와 원형강관의 두 이질재료간의 접촉면에서의 상호작용에 대한 해석적 연구로써 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 쉬어코넥트의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면에 대한 역학적 특성을 나타낼 수 있는 모델링기법, 해석기법에 대하여 제시하고, 역학적 특성을 규명하고자 한다.
        4,000원
        60.
        2005.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서는 단면성질을 나타내는 모멘트-곡률 관계에 토대를 둔 해석모델을 제안하였다. 기존의 제안된 해석방법에서는 모멘트-곡률 관계가 완전부착을 가정한 휨거동만을 주요한 거동으로 가정하여 구조물의 응답을 과소평가하고 강성을 과대평가한 것과는 달리 제안된 해석 방법에서는 접합부의 부착슬립에 의한 강체변형을 산정할 수 있는 알고리즘을 개발하였고 나아가 등가휨강성을 이용하여 부착슬립에 의한 강체변형을 고려한 철근콘크리트 구조물의 해석을 수행하였다. 또한 모멘트-곡률 관계를 철근의 항복점을 기준으로 두개의 직선으로 간편화 시킴으로써 해석의 효율성을 높이는 한편 고려해야 할 비선형 거동특성을 효과적으로 반영하였다. 마지막으로 철근콘크리트 구조물의 비선형 해석에 대한 제안된 모델식의 적용성을 검증하기 위하여 해석결과와 실험값들의 비교를 수행하였다.
        4,300원
        1 2 3 4 5