The Adhesion method is general to reinforce steel structures using FRP(Fiber reinforced Plastic) material. Until recently in many studies, the adhesion method is being utilized. Most of the problem of this method have been eliminated. The bond performance is not enough due to the delaminate of epoxy between FRP and steel. In order to improve the problem, a bolt tighting, FRP sheet wrapping is to evaluation the degree of bond performance improvement in study.

The seismic design range for the national public facilities and power plant is expanded such as it becomes the earthquake Disaster Relief Act with the finance since 2008 as the seismic design concept is highly regarded, etc. The reinforcement of the brace is essential for the seismic performance security of the structure which is unable to be satisfied the current seismic design criteria. The tension brace in which the slenderness ratio is big was designed to the unique lateral force resistive element. And the buckling is generated in the first stage and it is unable to exhibit the structural capability. In this research, the buckling strength improvement the reinforcing method of the suggested tension brace tries to be verified through the experiment.

Ni-20Cr-20Fe-5Nb alloy with or without was manufactured by mechanical alloying process and consolidated by spark plasma sintering (SPS). The grain size of the alloy with was smaller than that of alloy without which results from the effect of suppressing grain growth. The tensile strength at room temperature was increased by the addition of but decreased abruptly at temperature above . It seems to result from the change of deformation mechanism due to fine grain size, that is, grain boundary sliding is predominant at above while internal dislocation movement is predominant at below . After conventional heat treatment process of solution treatment and aging, a small amount of phase was formed in Ni-20Cr-20Fe-5Nb alloy while a large amount of was formed in Inconel 718 in the previous report. This is due to exhaustion of Nb content by the formation of NbC during consolidation.

The effect of use of as PCA(process control agent) to prevent the carbon contamination during mechanical alloying process and the precipitation behavior in Ni-20Cr-20Fe-5Nb bulk alloy after aging were investigated. NbC and were formed during mechanical alloying and consolidation processes in the Ni-20Cr-20Fe-5Nb alloy in which methanol() was added as PCA. Formation of NbC in this alloy decreased the amount of Nb dissolved in the Ni matrix. The use of as PCA in Ni-20Cr-20Fe-5Nb alloy prevented the formation of NbC and increased the hardness. The increase of hardness in this alloy was attributed to the increased amount of Nb dissolved in the Ni matrix. After aging treatment for 20 hours at of Ni-20Cr-20Fe-5Nb bulk alloy in which added as PCA, precipitates were formed, respectively. The precipitation temperatures of and in this bulk alloy were lower than those in commercial IN 718 alloy. It seemed that the lower precipitation temperatures for and in this bulk alloy than in commercial IN 718 alloy were due to severe plastic deformation during mechanical alloying.

시설 과채류 재배지의 뿌리혹선충의 피해경감을 위해서 경북도내 시설 오이 재배단지인 칠곡과 참외재배 주산지인 성주에서 1992년부터 1994년까지 3년간 방제시험한 결과 뿌리혹선충의 피해를 경감시키기 위한 토양개량 적기는 모래산흙인 마사토의 경우에 3년 붉은산흙인 경우 4년마다 하는 것이 효과적이고 농약과 조합한 오이의 방재시험에서 빗사마드 분제가 78.2%, 카보입제+토양반전+담수가 71.2%, 카보입제+담수가 66.3%이었으며 참외에서 살충제처리후 20일에는 77.7~80.6%의 방제효과를 보였으나 60일 후에는 33.7~49.5%로 방제가 낮아 후기에는 효과가 낮았다. 참외재배 논에서의 작부체계에 따른 뿌리혹선충 밀도 억제효과는 참외 재배후 담수하여 벼를 재배할 때에 벼 수확시 방제효과가 91.1%로 대부분의 선충이 사멸되었다. 각 처리구 공히 처리당시에는 뿌리혹선충 증식을 억제하였으나 생육추기로 갈수록 선충밀도가 증가되었다. 그러나 토양개량은 3년간 효과적이였으며 가장 경제적으로 선충의 증식을 억제하 수 있는 처리는 3년마다 한번씩 벼를 재배하는 것이었다.

This study was conducted to assess genetic diversity among 16 genotypes of boxthorn (Lycium chinensis Mill.) using inter-simple sequence repeat (ISSR) markers. The 18 ISSR primers out of 100 primers showed the amplification of 101 reproducible fragments. A total of 56 DNA fragments were polymorphic with an average 3.1 polymorphic bands per primer. The polymorphic primers were divided into 16 anchored primers and 2 non-anchored primers. All of the anchored primers were di-nucleotide repeat motif, and polymorphism level was higher in the primers with poly GA and CT motif than CA and GT motif primers. Based on polymorphism, cluster analysis was conducted by the unweighted pair-group method with arithmetic average (UPGMA) methods. Sixteen boxthorn varieties and accessions were separated into 2 distinctive groups and genetic distance of cluster ranged from 0.82 to 0.97. Eighteen markers were able to distinguish every variety. Therefore, ISSR markers may be suitable for characterizing the large numbers of germplasms and fingerprinting of boxthorn varieties.

1990~92년간 남부지방 식방풍 재배시 3요소 시용랑및 피복처리가 수량 및 품질에 미치는 영향을 조사코자 시험한 결과를 요악하면 다음과 같다. 1. 3요소 시용량 시험 가. 3요소 각각 결제에 의한 수량 감수율은 질소〉인산〉칼리순으로 적었다. 나. 식방풍뿌리중 회분 함량과 질소 시비랑과는 부의 유의 상관관계가 있었고, 칼리 시용량과는 정의 유의적인 상관관계가 있었다. 다. 남부지방에서 식방풍 일년생 수확시 시비적량은 N-P2O5-K2O=21-13-10kg/10a이었다. 2. 피복효과시험 가. 흑색비닐피복에서 출현율이 무피복 80%보다 6% 낮으나 수량이 7%정도 증수하므로 남부 지역에서는 흑색비닐피복재배가 좋을것으로 생각하며 투명비닐피복재배는 출현율이 낮아 수량이 25% 감수하였다. 나. 피복재료에 따른 식방풍의 품질조사결과 회분, 산불용성회분 및 엑기스 함량은 피복재료간 차이가 없었다.

경지이용률 향상을 위하여 1985년부터 1992년(8년간)까지 2년 1기 작부양식으로 4기에 걸쳐 소득이 높은 작물을 공시하여 다양한 작부양식으로 작물별 년차간의 수량과 작부양식간에 수량, 조수익, 소득의 년차간 변리를 검토한 결과를 요약하면 다음과 같다. 1. 년차간 수량의 변리가 큰 작물은 고추(33.5%), 마늘(26.0%), 가을배추(25.7%) 등이고 적은 작물은 오이 (9.9%), 단옥수수(10.9%), 봄감자(11.0%) 등이였으며 벼는 4.4～13.3%의 변리를 보였다. 2. 소득이 높은 작물은 가을배추(956± 132천원), 마늘(859± 220천원), 고추(696± 204천원) 등이였으며 낮은 작물은 보리(136± 33천원), 강남콩(177± 67천원), 완두(264± 57천원) 등이었다. 변리가 심한 작물은 참깨(40.9%), 단옥수수(38.1%) 등이고 적은 작물은 땅콩(13.2%), 가을배추(13.9) 등이 었다. 3. 작부양식별 소득은 때-보리조합(992± 228천원)에 비하여 토란-강남콩-벼조합(843± 102천원)을 제외한 전조합이 증가되었으며 특히 오이-가을배추-완두-벼조합(1,887± 632천원)이 90% 증가되었고 다음은 참깨-마늘-벼조합(1,507± 357천원)이 52% 증가되었으며 년차간의 소득 변리는 12.1～33.5%의 범위였다.