검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 840

        61.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 폭발하중을 받는 부재의 저항성능 평가를 위한 모멘트-곡률 관계 기반 수치해석 기법을 소개한다. 직접전단 파괴 모 드를 고려하기 위하여 경험적인 직접전단응력-슬립양 관계를 기반으로 하는 무차원 스프링 요소를 도입하였다. 재료에 대해 정의된 동적증가계수 식을 바탕으로 단면의 모멘트-곡률 관계에 직접적으로 적용가능한 단면의 곡률 변화율에 따른 동적증가계수 식을 제작 하였다. 또한 부착슬립의 영향을 고려하기 위하여 소성힌지영역 내에 등가 휨강성을 도입하였다. 제안된 수치해석 모델의 타당성 검 증을 위하여 실험결과와의 비교연구를 수행하였으며, 단자유도계 모델의 해석결과와의 비교를 통해 본 수치해석 모델의 우수성을 확 인하였다. P-I 선도를 제작하여 부재의 휨 파괴 및 직접전단 파괴에 대한 저항성능을 평가하였으며, 매개변수 연구를 수행하여 P-I 선 도 및 저항성능의 변화를 확인하였다.
        4,000원
        62.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        부공력감쇠는 풍직각방향의 와류공진을 예측하는데 있어서 매우 중요한 요소이다. 부공력감쇠는 진동유발하중 또는 피드백 하중을 구성하는 주요인자로 와류진동이 급격히 발현되는 현상을 설명하는 도구이기도 하다. 본 연구에서는 공력감쇠의 수학적 모델 을 제시하고 와류유발하중모델과 함께 와류진동을 예측하는 프러세스를 제안한다. 직사각형단면에 대한 공기력진동실험을 수행하여, 계측된 가속도로부터 공력감쇠와 와류유발하중을 추정하고 이에 기반하여 공력감쇠모델과 와류유발하중모델을 구축하는 과정을 다룬 다. 최종적으로 공력감쇠모델과 와류유발하중 모델에 대한 재해석을 통하여 가속도응답을 구하고 계측된 가속도와 비교하여 모델의 진동예측성능을 평가한다. 본 연구에서 제안된 와류하중모델의 진동예측성능을 평가한 결과 안정적이며, 신뢰도가 높은 와류진동예측 이 가능함을 알 수 있었다.
        4,000원
        69.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 비틀림비정형성과 수직비정형성을 가진 RC 필로티 건축물의 지진동에 대한 거동을 층강성을 적용하여 간단하게 모델링하는 선형 동적해석 프로그램을 개발하고자 한다. 개발된 동적 해석 프로그램을 적용하여 필로티 건축물의 동적 거동 및 필로티층 각 기둥의 전단력을 분석하고, 필로티층에 전단벽 또는 가새를 보강하였을 때 보강효과를 평가하고자 한다. 모서리코어가 있는 필로티 건축물에서 필로티층의 코어 반대편 모서리를 전단벽이나 K형 가새로 보강하였을 때 변위와 기둥 전단력이 크게 감소하는 것으로 나타났으며, 모서리 양면을 K형 가새로 보강하는 것보다 한 면을 전단벽으로 보강하는 것이 보강효과가 큰 것으로 나타났다.
        4,000원
        70.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper aims to develop numerical models for seismically-deficient reinforced concrete columns retrofitted using a fiber-reinforced polymer jacketing system under blast loading scenarios. To accomplish the research goal, a coupling model reproducing blast loads was developed and implemented to the column model. The column model was validated with a past experimental study, and the blast responses were compared to the numerical responses produced by past researchers. The validated modeling method was implemented to the non-retrofitted and retrofitted column models to estimate the effectiveness of the retrofit system. Based on the numerical responses, the retrofit system can significantly reduce the peak dynamic responses under a given blast loading scenario.
        4,500원
        71.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A theoretical model has been studied to describe the sound radiation analysis for structure vibration noise of tire under the action of random moving line forces. When a tire is analyzed, it had been modeled as curved beams with distributed springs and dashpots that represent the radial, tangential stiffness and damping of tire, respectively. The reaction due to fluid loading on the vibratory response of the curved beam is taken into account. The curved beam is assumed to occupy the plane y=0 and to be axially infinite. The curved beam material and elastic foundation are assumed to be lossless Bernoulli-Euler beam theory including a tension force(T), damping coefficient (C) and stiffness of foundation(κ2) will be employed. The expression for sound power is integrated numerically and the results examined as a function of Mach number(M), wave-number ratio(γ) and stiffness factor(ψ). The experimental investigation for structure vibration noise of vehicle tire under the action of random moving line forces has been made. Based on the STSF(Spatial Transformation of Sound Field) techniques, the sound power and sound radiation are measured. Results strongly suggest that operation condition in the tire material properties and design factors of the tire govern the sound power and sound radiation characteristics.
        4,000원
        72.
        2021.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        다중 하중 과도응답해석은 시간에 따른 작용 하중에 대한 과도응답을 확인하므로 정교한 시스템 모델링 및 조밀한 시간 간격을 가 질수록 해당 시스템에 대한 동특성은 정확하게 나타내지만 이에 따른 계산 시간은 크게 증가하게 된다. 크리로프 부공간 기반 모델차 수축소법은 기계 시스템이 가지는 동적 특성과 거의 동일한 결과를 나타내면서 계산 시간을 줄일 수 있기 때문에 효율적인 과도응답 해석 방법이다. 본 연구에서는 다중 하중 및 이동 하중을 가지는 수치 예제를 통하여 크리로프 부공간 모델차수축소법 기반 과도응답 해석을 수행하고, 이를 통해 초기 시스템 및 축소차수 모델의 정확성 및 효율성을 비교하였다. 또한, 시스템 행렬 추출, 크리로프 부공 간의 기저 벡터로 구성되는 변환행렬 생성 및 축소차수모델 생성 그리고 이를 바탕으로 과도응답해석을 하는 절차를 수립하여 상용 유한요소 프로그램인 ANSYS Workbench ACT를 통해 과도응답해석 과정 자동화를 구현하여 그 효용성과 효율성을 보였다.
        4,200원
        76.
        2021.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, the effect of the turbulence intensity in across-wind direction on the wind load in CFD(Computational fluid dynamics) simulation was analyzed. ‘Ansys fluent’ software was used for CFD simulation. And the fluctuating wind speed applied to the simulation was generated according to Korean Design Standard and Von Karman wind turbulence model. The turbulence intensity in across-wind direction for simulation was applied from 0 to 100% of the turbulence intensity in along-wind direction. The analysis results showed that the turbulence intensity in across-wind direction had a particularly great effect on the wind load in across-wind direction.
        4,000원
        77.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지난 10년간 복원력 상실에 의한 어선의 해양사고가 지속해서 증가하고 있으며, 갑작스러운 강풍이 주요 원인으로 지적되고 있다. 이러한 강풍에도 견딜 수 있는 어선의 운동·조종성능을 확보하기 위해서는 정밀한 풍하중 예측 기법이 우선되어야 한다. 따라 서 본 연구에서는 전산유체역학 기법을 이용한 어선의 풍하중 평가기법을 개발하고자 한다. 특히, 고도 변화에 따라 풍속이 변화하는 계산환경을 모사하여 그 결과를 균일한 속도분포를 가정한 수치해석 결과와 비교 분석하고자 한다. 본 연구에서는 0-180°까지 15° 간격 으로 13개의 방향에 대해 풍하중을 계산하였으며, 계산에 사용된 메쉬 모델은 메쉬 의존성 시험을 수행하여 개발하였다. 전산수치해석은 RANS(Reynolds-averaged Navier-Stokes) 기반 상용 해석 Solver인 STAR-CCM+(Ver. 13.06)와 k-w 난류 모델을 이용하여 정상상태(Steady State) 유동해석을 수행하였다. 수치해석결과를 간략히 살펴보면 Surge, Sway 및 Heave에서 39.5 %, 41.6 % 및 46.1 % 풍하중이 감소하였으 며 Roll, Pitch 및 Yaw에서 48.2 %, 50.6 % 및 36.5 % 감소하였다. 결론적으로 본 연구에서는 고도에 따른 풍속 변화 모델을 통해 기존보 다 정밀한 수준의 풍하중 추정이 가능한 것을 확인하였으며, 그 결과가 선박의 풍하중 추정 평가기법 발전에 이바지하길 기대한다.
        4,000원
        78.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The governing equation for a dome-type shallow spatial truss subjected to a transverse load is expressed in the form of the Duffing equation, and it can be derived by considering geometrical non-linearity. When this model under constant load exceeds the critical level, unstable behavior is appeared. This phenomenon changes sensitively as the number of free-nodes increases or depends on the imperfection of the system. When the load is a periodic function, more complex behavior and low critical levels can be expected. Thus, the dynamic unstable behavior and the change in the critical point of the 3-free-nodes space truss system were analyzed in this work. The 4-th order Runge-Kutta method was used in the system analysis, while the change in the frequency domain was analyzed through FFT. The sinusoidal wave and the beating wave were utilized as the periodic load function. This unstable situation was observed by the case when all nodes had same load vector as well as by the case that the load vector had slight difference. The results showed the critical buckling level of the periodic load was lower than that of the constant load. The value is greatly influenced by the period of the load, while a lower critical point was observed when it was closer to the natural frequency in the case of a linear system. The beating wave, which is attributed to the interference of the two frequencies, exhibits slightly more behavior than the sinusoidal wave. And the changing of critical level could be observed even with slight changes in the load vector.
        4,000원
        80.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper is about the selection of the optimum position of the driving system and the analysis of the load at that position in order to safely drive an object with heavy load on the turret with a linear actuator. Usually, linear actuator is required the greatest force when first lifting or pushing a structure, and it is determined by the initial angle and positions. After all, the optimal position of the linear actuator in a limited turret space is closely related the required load and driving performance of the linear actuator. Therefore, this paper contains the contents of securing the driving stability and performance at optimum position on the turret by considering the two cases of linear actuator position arrangement.
        4,000원
        1 2 3 4 5