검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 91

        81.
        2016.04 서비스 종료(열람 제한)
        A standard design section of a FRP DSCT wind power tower supporting 3MW was suggested and designed through AutoDSCT and CoWiTA programs. The thicknesses of the FRP tubes were optimized and by using the parameters of designed tower, the performance of the new type wind tower was evaluated via FAST program.
        82.
        2015.02 서비스 종료(열람 제한)
        고강도 그라우트재가 적용된 해상 풍력 발전 타워 자켓-파일 연결부의 설계를 위하여, 국외 해상풍력발전 타워 설계기준에서 제공하고 있는 그라우트 연결부 설계기준을 검토하였다. 해상 풍력 발전 타워 자켓-파일 기초의 연결은 sleeve의 내측과 파일의 외측에 링 모양의 전단키를 설치하고, 그 사이를 모르터로 채워 연결하는 방식으로 적용된다. 현재 DNV-OS-J101 및 NORSOK 등의 설계기준에서는 모노파일의 연결부 형식과 자켓-파일 연결을 모르터를 이용한 연결방법으로 설계기준이 정립되어 있으나, 설계기준별로 추천하고 있는 그라우트재의 강도는 상이하다. 본 연구에서는 콘크리트의 압축강도(fck), 전단키의 높이(h), 전단키의 간격(s) 및 그라우트 간격(tg)에 따른 연결부의 강도를 분석하기 위하여, 재료비선형 유한요소해석을 이용하여 구조적 거동분석을 수행하였다. 전단키의 간격에 따른 모르터와 전단키의 파괴양상을 확인하였으며, 이를 설계기준에서 제시하고 있는 강도와 비교하였다. 해석 결과를 이용하여 설계기준에서 제시하고 있는 전단키의 간격별 파괴모드와 유한요소해석결과의 파괴모드를 비교분석하여, 고강도 그라우트재의 적용성을 평가하였다.
        83.
        2014.02 서비스 종료(열람 제한)
        The probability distribution of wind speeds is a mathematical function describing the range and relative frequency of wind speeds at a particular location . In other word , the behavior of wind velocity at a given site can be specified as a probability distribution function. The accuracy of design wind estimation depends on the choice of an appropriate probability distribution model (PDM) and parameter estimation techniques. Generally, parameters for PDMs are estimated with the method of moments(MOM), probability weighted moments(PWM), and maximum likelihood (ML). In this work , we tried to estimate the parameters of PDMs for wind speed data using a recently developed meta-heuristic approach known as a harmony search (HS) that is a phenomenon-mimicking algorithm. The performance of the HS is compared to the genetic algorithm (GA) and conventional method (i.e.,ML) via simulation and case study.
        84.
        2014.02 서비스 종료(열람 제한)
        화석에너지의 고갈에 따라 신재생에너지에 대한 관심이 증대하고 있으며, 풍력발전에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 점차 대형화되고 있는 풍력발전 터빈에 대응하여 내부구속 중공 철근콘크리트(ICH RC; Internally Confined Hollow Reinforced Concrete) 구조를 적용한 풍력타워를 제안하고 설계하였다. 기존의 3.6MW 터빈과 5.0MW 터빈에 대응하는 강재타워와 동일한 외경을 갖는 두 단면과, 두 단면 외경의 평균값을 갖는 외경에 대해 단면설계를 수행하였다. 각각의 단면에 대해 중공비를 50%~90%까지 변화시켜 단면을 설계하였다. 설계된 단면에 대해 재료비선형과 콘크리트의 구속효과를 고려하여 축력-모멘트 상관해석을 수행하고 모멘트-횡변위 해석을 수행하였다. 해석 결과, ICH RC 풍력타워는 강재타워보다 작은 외경으로 요구되는 축강도와 모멘트 강도를 발휘함을 보여주었다.
        85.
        2013.04 서비스 종료(열람 제한)
        Wind Turbine Tower takes about 26.3% of overall wind turbine cost. So tower shell design is very important part. When designing tower eigenfrequency, strength analysis, fatigue strength analysis, buckling analysis and flange connection analysis have to considered. This paper contains procedure of tower analysis and compare ABAQUS result with design specification
        86.
        2013.04 서비스 종료(열람 제한)
        For the optimized design of the wind turbine tower, demonstrate the superiority of ability to resist the lateral load on the ICH-CFT, i.e. ability to resist the moment, compared to Steel Tubular Type that is mainly used in the existing, by using P-M Diagram
        87.
        2013.04 서비스 종료(열람 제한)
        This study estimated extreme wind speed by means of national wind map, provided by Korea Institute of Energy Research, to sustain the wind towers’ structural stability that is required for the production of mass wind power. The number of research object regions is three in the East, West and South seas. Meteorological resource data were calculated by dividing the data into the various reference periods. In addition, Gumbel distribution method and Extreme Wind Speed Model (EWM) indicated in IEC 61400-3 were adopted to measure the extreme wind speed. In conclusion, it is discovered that the more suitable Gumbel distribution method is to secure the stability of wind towers.
        88.
        2011.03 KCI 등재 서비스 종료(열람 제한)
        최근들어 사장교나 현수교와 같은 케이블 형식의 장대교량이 많이 건설되거나 계획중에 있다. 하지만 도로교 설계기준에 제시된 풍하중 산정시 중요한 요인인 기본풍속 산정함에 있어서 1995년까지 측정된 풍속자료를 근거로 한 일반교량에 적합한 풍속을 명시하고 있어 장대교량에 적합한 풍속에 대한 재검토가 필요한 상황이다. 본 연구에서는 태풍의 빈도가 높고 대부분의 장대교량이 건설되고 있는 서남해안지역으로 구체화하였다. 풍하중기준과 같이 극치I형분포(Gumbel분포)에 의해 일반교량에 적용할 100년, 장대교량에 적용할 200년 재현기대풍속을 적률법과 최소자승법의 두 가지 방법으로 추정하고, 극한 상황인 해상에서 불어오는 풍속으로 보정하여 지상풍속보다 약 17%정도 큰 값을 추정하였다. RMS error 방법에 의해 재현기대풍속의 적합성을 평가한 결과 최소자승법이 서남해안지역의 경우 적합성이 우수하였다.
        89.
        2010.09 KCI 등재 서비스 종료(열람 제한)
        A case study for the design of a wind farm in complex terrain was carried out using the wind farm site analysis software OpenWind, which has an open-source platform and is free to use. The Youngdeok Wind Farm, constructed on mountainous terrain in Korea, was chosen as a model site; the design process reproduced using OpenWind. A comparison of the positions of the wind turbine derived from the OpenWind optimization process and the current positions were in good agreement. The annual energy production predicted by OpenWind compared with the prediction by the micrositing software, WindSim, were also validated to within 1%. Therefore, it was confirmed that OpenWind can be used for a practical wind farm design project. It is also anticipating that this paper will provide a prototype process for the design of a wind farm site and offer a database for the post-evaluation of a constructed wind farm in Korea.
        90.
        2005.09 KCI 등재 서비스 종료(열람 제한)
        In cargo-working, it unavoidably happens that the quay crane slip along the rail and the container move from side to side. Especially, they involve a lot of risk in bad weather. The rail clamp is a mooring device to prevent that the quay crane slips along the rail due to bad weather or the wind blast while the quay crane do the cargo-working And it will play a greater role in port container terminal integration and automation To design the wedge type rail clamp, it is very important to determine the wedge angle. In this study, we expect that the design wind speed of the quay crane will change over 16m/s. Assuming that the design wind speed is 40m/s, we determined the proper wedge angle of the wedge type rail clamp for the 50ton class quay crane.
        91.
        2005.08 KCI 등재 서비스 종료(열람 제한)
        본 연구에서는 풍하중 설계 기준에 따른 50톤급 컨테이너 크레인의 안정성을 비교·분석하였다. '항만시설장비기준 /크레인강 구조부분 설계 기준(KS A 1627)'과 건설교통부의 '건축물하중기준'에 의거한 풍하중이 산정되었으며, 이리한 풍하중이 컨테이너 크레인에 작용할때, 컨테이너 크레인의 각 지지점에서 발생돠는 반력을 분석함으로써 구조적 안정성을 비교·평가하였다. 연구결과. 컨테이너 크레인의 설계 풍하중 산정 시 설계풍속의 명확한 정의가 필요하고, 컨테이너 크레인의 구조 안정성 분석을 위하여 인장력 평가와 지반 안정성을 고려하기 위한 최대 압축력 검토의 필요성을 확인하였다.
        1 2 3 4 5