우리나라 난온대 도서지역을 광범위하게 조사해 TWINSPAN분석을 통해 식생을 유형화한 후에 유형별 입지환경과 군집구조 특성을 밝혔다. 이를 바탕으로 식생유형별 복원전략을 도출하여 난온대림 복원계획의 방향성을 제시하고자 했다. 식생유형은 명료하게 8개로 나뉘었는데 군락Ⅰ∼Ⅳ는 후박나무, 구실잣밤나무 등이 우점한 양호한 상록활엽수림 이었다. 반면, 군락Ⅴ∼Ⅷ은 곰솔림과 낙엽활엽수림, 인공조림지로 난온대 지역의 퇴행천이 식생이었다. DCA분석 결과로 도출된 환경요인은 해발고(최한월 평균기온)와 해안선에서 거리(내염성)였다. 2가지 환경요인에 따라 후박나무 림, 구실잣밤나무림, 가시나무류림 유형으로 난온대림 분포패턴이 명료해졌다. 3가지 식생유형을 복원대상지의 입지환 경을 고려해 복원목표 식생으로 적용하는 것이 합리적이다. 군락Ⅴ∼Ⅷ에는 곰솔, 낙엽활엽수 등이 수관층을 형성했는 데 종자 확장력이 강한 상록활엽수종이 하층에 빈번하게 출현해, 상록활엽수림으로 식생천이 가능성이 컸다. 도서지역 에 산림이 사라진 황폐지는 협소하지만, 곰솔림과 낙엽활엽수림 등의 퇴행천이된 식생이 대면적을 이룬다. 이곳을 상록활엽수림으로 갱신하는 복원전략이 탄소중립 실현과 생물다양성 증진 측면에서 효과성이 더 클 수 있다.

토마토의 생육과 수확량을 예측하기 위한 중요한 요소 중의 하나는 엽면적이다. 이러한 엽면적을 정확하게 예측하는 것 은 토마토 식물 생장 평가 모델의 시작이라고 할 수 있다. 이를 위해 본 연구는 토마토 잎의 측정을 통해 엽면적(LA)을 추정 하는 효과적인 모델을 확인하기 위해 수행하였다. 토마토 식 물 잎 조사를 위해 2주 간격으로 5개체의 토마토 식물체의 전 개된 모든 잎에 대해 엽면적(LA), 엽장(L), 엽폭(W), 엽신장 (La)를 측정하였다. LA와 토마토 잎 독립변수의 상관관계는 La × W, L × W, La + W, L + W의 식이 강한 양의 관계를 나타 냈다. LA 추정은 LA = a + b(La2 + W2) 을 사용하는 선형 모델 이 가장 정확한 추정치를 나타내었다(R2 = 0.867, RMSE = 88.76). 9월부터 12월까지 토마토 잎의 위치에 따른 상, 중, 하 엽의 모델을 살펴본 결과, 상, 중, 하로 잎 위치에 따른 모델별 결정계수(R2) 값은 각각 0.878, 0.726, 0.794였다. 상위엽을 바탕으로 추정된 모델의 정확도가 가장 높았는데, 이는 10월 이후 토마토 재배 농가에서 중위엽과 하위엽에 실시한 반적엽 의 영향으로 판단된다.

The Nuclear Cycle Experiment Research Center is one of the facility of the Korea Atomic Energy Research Institute (KAERI). This facility is a laboratory-scale version of pyro-processing technology. Mixture depleted Uranium (DU) and depleted Uranium (DU) feed material are used in this facility for pyro-research. During summer, air conditioners that maintain temperature and humidity are always in operation to protect analysis equipments. 15 air conditioners are installed in this facility. The condensate which is generated in 15 air conditioners is collected in one place to analyze. Sampling was performed to check the level of contamination, U, pH and gamma radiation test were performed. This paper shows the degree of contamination of air conditioner condensate which is generated in the radiation management area.

The hydro-mechanical behavior of rock mass in natural barriers is a critical factor of interest, and it is mainly determined by the characteristics of the fractures distributed in the rock mass. In particular, the aperture and contact area of the fractures are important parameters directly related to the fluid flow and significantly influence the hydro-mechanical behavior of natural barriers. Therefore, it is necessary to analyze the aperture and contact area of fractures distributed in potential disposal sites to examine the long-term evolution of the natural barriers. This study aims to propose a new technique for analyzing the aperture and contact area using the natural fractures in KURT (KAERI Underground Research Tunnel), an underground research facility for the deep geological disposal of high-level radioactive waste. The proposed technique consists of a matching algorithm for the three-dimensional point cloud of the upper and lower fracture surfaces and a normal deformation algorithm that considers the fracture normal stiffness. In the matching process of upper and lower fracture surfaces, digital images obtained from compression tests with pressure films are used as input data. First, for the primary matching of the upper and lower fracture surfaces, an iterative closest point (ICP) algorithm is applied in which rotation and translation are performed to minimize the distance error. Second, an algorithm for rotation about the x, y, and z axes and translation in the normal direction is applied so that the contact area of the point cloud is as consistent as possible with the pressure film image. Finally, by applying the normal deformation algorithm considering the fracture normal stiffness, the aperture and contact area of the fracture according to the applied normal stress are derived. The applicability of the proposed technique was validated using 12 natural fractures sampled from KURT, and it was confirmed that the initial apertures were derived similarly to the empirical equation proposed in the previous study. Therefore, it was judged that the distribution of apertures and contact areas according to applied normal stress for laboratory-scale fractures could be derived through the technique proposed in this study.

As cable TV, which has been leading the paid broadcasting market, has given the lead to IPTV, which has huge communication capital, its competitiveness is gradually weakening. This study examines the operation status of local cable TV and seeks ways to strengthen competitiveness for survival. To this end, we conducted data analysis such as related statistics, broadcasting industry survey reports, IPTV growth reports, CMB management indicators, paid broadcasting literature data, marketing reports, industry success stories, and marketing mix and SWOT analysis. As a result, four strategies for strengthening the survival competitiveness of local cable TV, namely joint purchase apartment marketing strategy, influencer marketing strategy, relationship marketing strategy, and digital marketing strategy were derived. Therefore, the results of this study can contribute to the improvement of the competitiveness of local cable TV, which has been with local residents through close content, and can be used as basic data for establishing marketing strategies for local cable TV in the future.