PURPOSES : The purpose of this study was to evaluate newly developed Guss mastic asphalt with polymer modifier as a elastomer and a plastomer in to polymer content. METHODS : As polymer modifiers, 10%, 20% of elastomer and 10%, 20% of plastomer, and 10% of elastomer and 10% of plastomer are all added to the binder, and the physical properties of the Guss mastic asphalt mixture with these binders are changed. The properties of mixtures with workability, penetration depth and dynamic stability were compared with the existing Guss mastic asphalt mixture. RESULTS : When using the elastomer and the plastomer, the dynamic stability of the Guss mastic asphalt mixture was improved compared to the conventional asphalt mixture, and when the amount of the elastomer was 20%, the workability was reduced. In addition, when 10% of the elastomer and 10% of the plastomer were used, the workability was not significantly deteriorated and the dynamic stability was increased. CONCLUSIONS : In order to improve the dynamic stability of the Guss mastic asphalt mixture using the polymer-modified binder, it is effective to use an elastomer and a plaststomer.

PURPOSES : This study aims to develop drainage minor-structure materials using asphalt mixtures, and to apply construction methods. METHODS : The AP-5, 120-150A, and 150-200A binders were adopted to select the optimal asphalt binder for the domestic application of asphalt concrete in curb construction. The mixture design of asphalt mixtures has applied the standard for evaluating asphalt curb mixtures in Korea. Test construction utilized asphalt curb equipment to evaluate asphalt mixtures, according to the type of asphalt binder. RESULTS : The results of the asphalt mixture design indicated that the optimum asphalt content was determined at 2–3% air void for each type of asphalt binder, and the quality of the asphalt mixture applied with asphalt curb binder was excellent. In addition, the quality difference was significant, depending on the temperature of the asphalt mixture at each phase of the asphalt curb construction. CONCLUSIONS : Asphalt curb construction using asphalt materials has a large impact on the quality, depending on the temperature of the asphalt mixture, therefore management at the appropriate temperature is important when applying it to the site. Further research is also required on the production, transportation, and dedicated equipment of asphalt mixtures.

PURPOSES : This study aims at evaluating the use of an electromagnetic density gauge (EDG) to measure the in situ density and air-void content of asphalt concrete (AC) pavement. METHODS : In situ AC pavement density and air-void readings were obtained from two sites (Daegu and Ulsan) using an EDG. Calibration of the EDG was conducted by first obtaining density values at three different positions, on each pavement where core samples were extracted afterward. The core samples were then tested to obtain laboratory density and air-void values. The density measured using the EDG was then subtracted from the laboratory values to obtain the offset calibration values, which were then adopted to calibrate the in situ measurements using the EDG. Moreover, to analyze the effect of moisture on the pavement surface, EDG measurements were conducted under dry and wet conditions to compare the in-situ readings. RESULTS : The in-situ density readings of AC tend to be higher in moist/wet conditions. By applying the calibration value to the EDG readings, the density error percentage was reduced from 0.61% to 0.096%, and 0.64% to 0.16% for Daegu and Ulsan sites, respectively. Consequently, the air-void content error percentage was reduced from 12.8% to 1.04%, and from 10.07% to 1.78% for Daegu and Ulsan sites, respectively. CONCLUSIONS : The electromagnetic density gauge (EDG) is an effective tool for the non-destructive measurement of in situ pavement density. By applying offset calibration values, the error in the field readings was reduced, and the accuracy of the EDG measurements was improved.

PURPOSES : The purpose of this study was to evaluate the newly developed Guss mastic asphalt mixtures, called EQ-mastic asphalt mixtures, which contain melted additives for decreasing cooking time. METHODS : A series of experiments were performed to investigate the effectiveness of the melted additives in EQ-mastic asphalt mixtures. Both the existing Guss mastic asphalt mixture and the EQ-mastic asphalt mixture were produced with the same amounts of asphalt binders, aggregates, and fillers, but the existing Guss mastic asphalt mixture contained 3% Trinidad lake asphalt (TLA). The EQ-mastic asphalt mixture contained 3% of additives, including TLA and polyolefin. The physical material performances of both mastic asphalt mixtures were obtained by conducting the Luer fluidity test, penetration test, dynamic stability test, and low-temperature bending test. The results of the tests for the existing Guss mastic and EQ-mastic asphalt mixtures were compared. RESULTS : The fluidity, penetration, dynamic stability, and low-temperature bending strains of both the existing Guss mastic and EQmastic asphalt mixtures all satisfied the standard values provided in the production and construction guides of the Guss mastic asphalt pavement. CONCLUSIONS : When melted additives containing polyolefin are used in the production of Guss mastic asphalt mixtures, the cooking time decreases, so that the corresponding energy consumption and asphalt fume amount can be reduced. Therefore, an EQ-mastic asphalt mixture is proposed for use as an eco-friendly pavement material.

PURPOSES : The purpose of this study is to evaluate the asphalt binder properties using FTIR analysis. METHODS : To investigate the chemical properties of asphalt binders, FTIR tests were performed. Recently, FTIR was used for quantification under various aging conditions. Three scans were averaged for each sample within the wavenumber range of 4000 to 400 cm-1, at a resolution of 4 cm-1 (default Simatech software settings). To determine the oxidation of the extracted asphalt binder and the remaining TCE solution in the extracted asphalt binder, the penetration test was adopted and compared. To track the changes in the chemical composition of the aged bitumens, the ATR spectrum of each sample was analyzed, both qualitatively and quantitatively. The qualitative analysis involved identifying characteristic absorption peaks for the functional group of interest, such as polymer components, carbon and sulfur oxidation products, and polar aromatics. RESULTS : The asphalt binder is easily oxidized in air during FTIR testing. To reduce the oxidization of the asphalt binder, the asphalt binder must avoid air contact to measure constant results. Sometimes, the extracted asphalt binder has a residual solvent (TCE), which affects the evaluation of the extracted asphalt binder rheology, such as absolute viscosity and penetration testing. To solve this problem, the research team adopted the FTIR test method. First, the TCE was scanned with FTIR to obtain the chemical characteristics of TCE. After that, the extracted asphalt binder was scanned and the FTIR spectra were compared with those of TCE. If there is a TCE in the extracted asphalt binder, a typical peak was found in the spectrum. Thus, it is possible to estimate the content of the TCE remaining in the extracted asphalt binder via the FTIR test method. CONCLUSIONS : It is possible to evaluate the aging of asphalt binder through FTIR analysis used for the analysis of the chemical structure of asphalt. In addition, during FTIR analysis, the sample is required to avoid air contact to obtain accurate results. FTIR analysis was conducted to confirm whether the solvent (TCE) remained in the extracted asphalt binder and it was confirmed that the penetration increased by a factor of two when the solvent remained. This suggests that it is difficult to control the quality of the asphalt mixture by controlling the amount of recycled additive, as well as the aging of the extracted asphalt binder.

PURPOSES : The objective of this study is to quantitatively evaluate the visibility of a mixed-color asphalt pavement. METHODS : The visibility was compared and evaluated using a color pavement specimen, i.e., a pigment was added to the asphalt binder, which was used to fabricate a color pavement specimen, with red aggregate as the coarse aggregate, and the resultant difference in visibility was quantitively evaluated. The color asphalt mixture to which the pigment was added was prepared by varying the amount of pigment added — i.e., 3 %, 5 %, and 7 % of the total weight of the mixture — to confirm the change in visibility according to the amount of pigment added. For the color asphalt mixture with color aggregates, red-colored mudstone coarse aggregates(13mm and 10mm) were used. It is assumed that the surface of the produced specimen simulates the initial performance periods and the cut section of the specimen simulates the state of completion of the performance periods. RESULTS : The initial ΔE for the colored pavement exhibited the best visibility of WC-2-R. However, when considering the value of a in the red color pavement, the visibility of SMA13-R and WC-2-R was assessed as best; this is because SMA13-R exhibits a lower color difference than WC-2-R at the beginning of the performance periods but the red color is better. Upon completion of the colored pavement performance periods, the ΔE of each specimen using the SMA13-0C specimen as the reference specimen was high in SMA13-RC and ΔE using the WC-2-0C specimen as the reference specimen was also high in SMA13-RC. In addition, the a value is also higher than that of other mixtures so it is judged that the visibility of SMA13-RC is best when the performance periods are completed. CONCLUSIONS : The a value tended to increase with the increasing amount of pigment added at the beginning of the performance; however, it was found to decrease rapidly as the performance was completed. However, in the case of using SMA13-RC as the colored aggregate, since the color of the aggregate itself is red, it exhibits a constant value of 5.67 from the performance start to completion. Therefore, it is judged that a constant red color can be expressed during the performance period when the colored pavement using red colored aggregate is applied to the exclusive bus lane.

PURPOSES : The cooling characteristics of the asphalt mixture in a moving dump truck were analyzed using a numerical simulation method. The cooling characteristic can be used to determine the optimum transport path for minimizing the temperature drop of the asphalt mixture. METHODS : In this research, a coupled analysis of the discrete element method (DEM) with computational fluid dynamics (CFD) was applied for cooling characteristic analysis of asphalt mixtures in transit. Two different transit speeds, 30 km/h and 60 km/h, were considered to evaluate the effect of speed on the temperature drop of the asphalt mixture. Velocity, pressure, and temperature contours were plotted and temperature variations were compared. RESULTS : Most of the temperature drops in the asphalt mixture were observed in the middle of the dump box in the longitudinal direction. It was confirmed that a faster speed causes a greater temperature drop for the same travel time and a slower speed causes the more temperature to reach the same travel distance as expected. CONCLUSIONS : It is concluded that the coupled analysis method can be used to quantitatively evaluate the effect of vehicle speed on temperature drop in asphalt mixtures. In addition, the method can be used to determine the optimum travel path considering environmental conditions and traffic congestion.

PURPOSES : This study evaluates the mechanical properties of high-viscosity polymer-modified asphalt binders using PG and MSCR tests. METHODS : Using the Superpave asphalt binder performance grade (PG) and multi-stress creep recovery (MSCR) test methods, the linear (dynamic shear modulus, stiffness, and viscosity) and non-linear properties — i.e., non-recoverable compliance (Jnr) and recoverable shear strain % recovery — of 16 different types (SBS, SIS, PE, PP) of polymer-modified asphalt binders were assessed. RESULTS : Based on the viscosity testing results. Most PG 82 binders did not meet the criterion of 3 Pa ·s. This indicates that they need to increase the mixing and compaction temperatures to reduce the high viscosity. The MSCR % Jnr results demonstrated that PG 76, PG 82–22, and PG 82-28/34 binders were below 1.0, 0.5, and 0.2, respectively. In addition, the MSCR % recovery results showed that PG 76, PG82-22, and PG82-28/34 were above 35 %, 55 %, and 80 %, respectively. CONCLUSIONS : It was found that the % Jnr decreased with an increase in the high-temperature PG of the asphalt binder, whereas the % recovery increased as the low-temperature PG of the binder increased.

PURPOSES : The type and degree of structural conditions and influencing factors distributed across representative sections should be similar to those distributed across entire sections as the representative sections have been predominantly used for developing performance prediction models, which substitute entire sections of road pavement. Therefore, a logic that selects the representative sections with similar distributions of structural conditions and the influencing factors with those of entire expressway asphalt pavement sections requires development. METHODS : The logic developed in this study to select the representative sections of asphalt pavements comprised three steps. First, the data on the structural conditions of the pavement and the influencing climate conditions and pavement materials were collected and organized. Consequently, in the second step, the candidate sections were selected, with the severity of the structural conditions of the pavement distributed widely and evenly. Finally, in addition to the widely and evenly distributed pavement conditions, the representative sections with climatic conditions and pavement materials were selected. RESULTS : A total of 6,352 ordinary asphalt pavement sections and 596 composite asphalt pavement sections were selected as entire expressway asphalt pavement sections and the data were collected and organized according to the logic developed in this study. Three times the representation sections were selected as candidate sections and, finally, 85 sections were selected as representative sections. The distribution of structural conditions and influencing climate conditions and pavement materials in the representative sections were similar to those in the entire sections. In addition, the representative sections were spread evenly across the country. CONCLUSIONS : The sections presenting similar distributions of structural conditions and the influencing factors of entire expressway asphalt pavement sections could be selected in this study. Using the representative sections selected in this study, a remodeling index model will be developed for predicting the asphalt pavement sections that require large-scale repair.