고분자전해질막은 전극 이외에 전기 화학 연료전지의 성능을 결정하는 중요한 요소이다. 고분자전해질막은 가스나 양성자 등의 작은 분자를 선택적으로 수송해야 한다. 고분자전해질막을 투과한 가스는 급속히 전기 화학적 환원을 발생시켜 음극 촉매의 열화를 유발하기 때문에 수소 장벽으로 작동해야 하며 가능한 한 빨리 양성자를 이동시켜야 한다. 지금까지 고분자전해질막의 수소 기체 투과도를 측정하는데 한정된 방법(예 : Constant volume/variable pressure (Time-lag)법)을 사용 했다. 그러나 측정의 대부분은 고분자전해질막은 건조된 진공 하에서 이루어진다. 그렇지 않으면 얻어진 수소 투과도는 측정 오차가 커지는 원인이 되기 쉽다. 이 연구에서는 일반적으로 고분자전해질막으로 사용되는 Nafion212의 수소 가스 투과 특성을 온도와 습도가 동시에 제어되는 in-situ 측정 시스템을 이용하여 평가하였다.

Sulfonated poly(arylene ether sulfone)(SPAES) random copolymers are representative alternatives to perfluorinated sulfonic acid(PFSA) ionomers used as the state-of-the-art polymer electrolyte membranes for fuel cells. SPAES copolymers have advantages such as low hydrogen permeability, low production cost. However, it is difficult to demonstrate high electrochemical single cell performances for a long period time, since SPAES membranes have critical interfacial issues with catalyst layers containing PFSA ionomers, particularly in the repeated hydrated and dehydrated cycles. In this study, called as radiation grafting of proton conductive polymers on SPAES membranes, is tried in order to improve proton conductivity without a severe loss in dimensional stability and to reduce interfacial resistance with PFSA catalyst layers at the same time.

Sulfonated poly(arylene ether sulfone) (SPAES) random copolymers have been perceived as membrane materials alternative to perfluorinated sulfonic acid (PFSA) ionomers, since they are cheap and chemically tunable when compared with PFSA. Moreover, their relatively low gas permeability, particularly to hydrogen, contributes to reduced thermal decomposition of membrane-electrode assemblies. In spite of their advantages, freestanding SPAES copolymers have critical issues associated with chemical/electrochemical durability as well as interfacial resistance with electrodes. In this study, SPAES-PTFE reinforced membranes are fabricated using consecutive membrane formation protocols, (e.g., SPAES nanodispersion in water-alcohol mixtures, spontaneous pore-filling, and solvent-assisted thermal treatment techniques) and systematically evaluated.

Polymer electrolyte membrane fuel cells (PEFCs) are eco-friendly energy conversion systems to convert hydrogen directly into electricity via an electrocatalytic reaction. Representative membrane materials of PEFCs are Perfluorinated sulfonic acid (PFSA) ionomers including NafionⓇ and 3M ionomers. In spite of high proton conductivity, it is difficult to apply PFSA free-standing membranes in real PEFC applications owing to their weak mechanical failures and thermo-chemical decomposition during PFEC operations, in addition to a relatively high production cost. In this study, Nafion nanodispersions in water-alcohol mixtures are fabricated using a supercritical fluid technique. The fundamental membrane characteristics are compared with those of counterpart membranes obtained from a commercially available Nafion emulsion.

직접 메탄올 연료전지(Direct Methanol Fuel Cells)는 액상의 메탄올을 연료로 직접 사용하는 전기 에너지 전환 장치로서 연료의 값이 싸고 취급이 용이하며 초소형화가 가능하다. Montmorillonite (MMT)가 첨가된 고분자 전해질 분리막의 경우 열적⋅물리적 성질이 개선되며 메탄올 투과도가 감소되는 장점을 가지고 있지만 이온전도도는 감소가 되는 단점을 가지고 있다. 본 연구에서는 술폰산기(-SO3H)를 포함하는 MMT를 제조하여 Sulfonated Poly(arylene ether sulfone)(SPAES) 고분자와 sulfonated MMT(sulMMT)를 혼합하여 유⋅무기 복합막을 제조하고 특성평가가 이루어졌다.

본 연구에서는 SPAES를 이용하여 제조된 블렌드막을 이용하여 연료전지용 전해질 막으로써의 응용 가능성을 확인하기 위하여 테스트를 진행하였다. 제조된 분리막은 상용화된 PES,PVdF를 이용하여 제조되었으며, 소수성 고분자가 첨가되어 메탄올 투과도가 감소됨을 확인하였으며 물리적 강도가 증가됨으로써 잠재적 가능성을 확인할 수 있었다.

Perfluorinated sulfonic acid (PFSA) ionomers have been widely used for renewable energy generation, including polymer electrolyte fuel cells (PEFCs), owing to their excellent resistance to harsh chemicals and good ion-transport properties. PFSA materials experience critical chemical decomposition to radical attacks, and fast hydrogen crossover leading to fairly reduced electrochemical performances, when they are used as membrane materials. Similar chemical degradation also occurs in PEFC electrodes containing PFSA ionomer binders used as both mechanical supporters and proton conductors and shortens PEFC lifetime. In this study, several approaches based on their morphological rearrangement to overcome these economical and technical issues are proposed. They include pore-filling membrane formation, nanodispersion, and their combination.

The volume of fluid (VOF) method is applied to study the effects of the gas channel cross-section shape on the removal characteristics of a water slug in a trapezoidal PEMFC gas channel. Two different open angles 50 and 60 degrees are selected to investigate the effect of cross-section shape on the behavior of a liquid water slug. In comparison to the 50 degrees case, the water slug is removed slightly faster for the 60 degrees case.

To study the effects of the gas channel wall contact angle on the behavior of a liquid water slug, numerical simulations are performed with the volume of fluid (VOF) method. Two different contact angle combinations on the side and top channel walls are selected. In comparison to the reference case, the water slug is removed faster when the hydrophobic contact angle is applied selectively in the corner section.

Perfluorinated sulfonic acid ionomers have been used as representative membrane materials in a wide range of applications. Though PFSA ionomers have been well known as chemically durable materials, their chemical resistances should be improved further to apply them to practical fuel cell systems operated under harsh conditions. One plausible solution would be to fabricate reinforced membranes composed of proton-conducting ionomers and chemically durable porous support films. In this study, pore-filling membranes are prepared via the impregnation of PFSA ionomers into porous PTFE support films. The objective of this study is to systematically investigate the influences of pore characteristics on proton transport behavior and electrochemical single performances.

Perfluorinated sulfonic acid (PFSA) ionomers have been widely used as membranes in the fields of green power generation and electrolysis. In spite of their high ion-conducting properties, it is difficult to apply them in the freestanding membrane state to harsh operation conditions owing to their chemical and electrochemical degradation issues. A promising membrane concept to satisfy this purpose would be “pore-filling membrane” composed of PFSA ionomers and porous PTFE support films. In this study, the porous PTFE support film treated with a cheap hydrophilic polymer is used as a reinforced material. Interestingly, the resulting PFSA-PTFE pore-filling membranes exhibit an extremely high proton conductivity with a fairly reduced ionomer content, which may give a valuable information to design a desirable pore-filling membrane.

본 연구에서는 탄화수소계열 고분자인 sulfonated poly arylene ether sulfone(SPAES) 고분자를 이용하여 연료전지용 전해질막을 제조하였으며 메탄올 투과도를 최적화 하기 위하여 소수성 고분자인 polyethersulfone(PES), Polyvinylidene fluoride (PVdF) 를 소량 첨가하여 블렌드막을 제조하였다. 제조된 분리막은 연료전지용 전해질 막으로써 요구되는 물리적, 화학적 안정성, 이온전도도, 셀 테스트등의 기본 물성을 측정하여 잠재적인 적용 가능성을 테스트 해보았다 또한 분자동력학 시뮬레이션을 이용하여 소수성 고분자와 SPAES고분자의 혼화성 측정과, 이온 및 메탄올 분자의 투과도를 예측해 보았으며 이를 이용하여 실제 실험 결과와 비교 분석을 진행하였다.

과불소계 술폰화 이오노머(perfluorinated sulfonic acid ionomers; PFSAs)는 뛰어난 수소이온전도성과 높은 내화학성으로 인해 고분자 전해질 연료전지(polymer electrolyte fuel cells)용 고체전해질로 널리 사용되고 있다. 그러나 PFSA 전해질은 가습-건조조건에서 연료전지가 구동에 따라 반복적인 팽윤-수축으로 인해 전극층이 전해질로부터 탈리되어 전기화학적 수명특성이 감소되는 문제점을 가지고 있다. 본 연구에서는 다공성 PTFE support film의 기공특성에 대한 이해를 바탕으 로 기공구조 내 나피온 이오노머를 함침시키는 강화막을 제조하였고, 기본특성을 평가하였다. 제조된 강화막은 매우 높은 수 소이온전도도(~0.5 S cm-1@90°C in liquid water)를 나타내었다.

수용성 고분자인 poly(vinyl alcohol) (PVA)에 가교제인 sulfosuccinic acid (SSA)를 첨가하여 가교반응을 통해 물에 용해되지 않는 막을 제조하였으며, 이온교환능력을 부여하기 위해 poly(4-styrene sulfonic acid-co-maleic acid) (PSSA_MA)를 PVA 질량대비 70, 80, 90 wt%로 달리 첨가하여 막을 제조하였다. 제조한 막의 특성을 알아보기 위해 FT-IR, 함수율, 이온교환용량, 이온전도도, 메탄올 투과도를 측정하였다. 함수율과 이온교환용량, 이온전도도는 PSSA_MA 함량이 증가할수록 증가하는 경향을 나타내었으며 메탄올 투과도는 감소하는 경향을 나타내었다. 특성평가 결과 본 실험 막의 최적 조성은 PVA10/SSA9/ PSSA_MA80으로 도출되었다

미래 친환경 선박 기술 중의 하나로 주목 받고 있는 연료전지 시스템의 선박 적용을 위해서 기술의 개발과 함께 필요한 것이 제도의 정비이다. 본 연구에서는 선박용 연료전지 개발동향, 연료전지시스템을 선박에 탑재하기위한 관련 국제기준으로 SOLAS와 IACS의 UR 및 UI을 검토하였고, IMO MEPC, IMO BLG 및 주요 선급 규정 등 연료전지 기준의 표준화 동향, 선박용 연료전지 기술기준의 개발시 고려되어야 할 사항 및 관련 제도의 국내도입을 위한 시사점까지 검토하였다. 현재 IMO에서 개발중인 IGF Code에는 연료전지 관련 부분이 포함되어, 본 규정 개발에 정부 및 국내 관련 기업체의 적극적인 참여가 필요하며 향후 IMO에서의 관련 규정개발 동향을 면밀하게 분석하고 적극적으로 대응할 필요가 있다.

This research is to investigate the performance analysis of fuel cell for flow channel with four different types of the channel (Serpentine I, II, Inter-digitated, Parallel) in the fuel cell stack. Velocity, pressure. and temperature distributions of fluid over the flow domain of the flow channel are numerically calculated for the optimum design of flow channel with unifrom inlet velocity. According to the calculations of low pressure drop between inlet and outlet in the flow channel, Serpentine I type is of highest performance of the flow channel shapes in the present fuel cell model.

A three dimensional numerical analysis was performed to study the effect of cathode inlet relative humidity on PEMFC performance characteristics. As cathode inlet relative humidity increases from 0 percent to 60 percent, the current density increases. Then, as cathode inlet relative humidity increases from 60 percent to 100 percent, the current density decreases. The two dimensional contour map analysis shows that the flooding phenomenon in cathode gas channel, gas diffusion layer, and catalyst layer leads to the decrease of current density.

Much research into fuel cells operating at a temperature below 800℃. is being performed. There are sig-nificant efforts to replace the yttria-stabilized zirconia electrolyte with a doped ceria electrolyte that has high ionic con-ductivity even at a lower temperature. Even if the doped ceria electrolyte has high ionic conductivity, it also shows highelectronic conductivity in a reducing environment, therefore, when used as a solid electrolyte of a fuel cell, the power-generation efficiency and mechanical properties of the fuel cell may be degraded. In this study, gadolinium-doped ceriananopowder with Al2O3 and Mn2O3 as a reinforcing and electron trapping agents were synthesized by ultrasonic pyrol-ysis process. After firing, their microstructure and mechanical and electrical properties were investigated and comparedwith those of pure gadolinium-doped ceria specimen.

A numerical analysis was performed to study PEMFC performance characteristics depending on the flow direction of cathode reactant gas, cathode relative humidity, and porosity of gas diffusion layer. As cathode relative humidity decreases and porosity increases, current density increases due to better diffusion of reactant gas to cathode surface. As current density increases, power density increases initially and then decreases with its maximum located around current density value of 2.2 Amperes per square centimeter. From the analysis of current density distribution inside membrane, the counter-flow cases show more uniform profile across the membrane than the co-flow cases due to more uniform reactant gas supply.

Microstructural and mechanical properties of Ni-YSZ fabricated using SPS processing have been investigated at various sintering temperatures. Our study shows samples to be applied as a SOFC anode have the proper porosity of 40% and high hardness when processed at 1100ºC. These results are comparable to the values obtained at 100- 200ºC higher sintering temperature reported by others. This result is important because when the fabrication processes are performed above 1100ºC, the mechanical property starts to decrease drastically. This is caused by the fast grain coarsening at the higher temperature, which initiates a mismatch between thermal expansion coefficients of Ni and YSZ and induces cracks as well.