본 연구에서는 해양플랜트설비 건조 현장에서 사용되고 있는 기존 고온 오일 플러싱 장비에 대한 성능개선을 위해 기존의 플 러싱 장치에 사용되던 오일에 질소가스를 혼합한 고온 오일 플러싱 시스템에 대하여 국제표준화기구 코드(ISO code)를 기준으로 이론적 연구를 수행하였다. 연구를 위해 오일-질소가스 혼합유체 플러싱 시스템 공정을 설계 후 청정성능에 영향을 주는 혼합유체의 혼합비율, 온도, 레이놀즈수 및 액상분율 등에 대한 공정모사 결과도 분석하였다. 그 결과 관 직경과 가스상의 체적분률이 일정한 상태에서 혼합유 체의 체적유량이 증가될수록 수평 유압배관 입출구의 액상분율 차이  값은 증가하게 되고 배관길이 방향의 위치에 따라 오일과 질 소가스 기포 사이의 상분포가 달라짐을 확인했다. 이러한 상분포의 변화는 오일-질소가스 혼합유체 플러싱 시스템의 청정성능에도 커다 란 영향을 줄 것으로 예상된다.

In this study, a winch and load motion control system design method is introduced. Especially, the winch and load (moving cart) are connected with long wire rope which is extended to few kilometers long. Therefore, the rope length changes such that many dynamic parameter values are changed as well by winding and releasing the rope from the winch system. In this paper, the authors designed the control system by considering the real time parameter variation to occupy and keep good control performance continuously. The effectiveness of introduced method was evaluated by simulation results.

Response surface methodology (RSM) is one of the statistical methods for optimizing dependent variable in response to independent variables, and has been used in various field of food engineering. The model coded by RSM has a canonical formulation of 2nd order polynomial with the normalized ranges of independent variables. To accurately accomplish the optimization using RSM an adequate experimental design, i.e., response surface design, is necessary. Response surface design is determined by type of design and number of independent variables. In this study, we are to develop a response surface design applicable for optimizing hulled barley (Hordeum vulgare) production under various conditions of temperature and humidity in forage growing system. As a result, 3 experimental designs were conceived for future RSM; central composite design (CCD), inscribed central composite design (ICCD) and equiradial design. Each design requires experimental trials of 13, 13, and 8, respectively. We will further select one of the designs for actual experiments for finding the optimal temperature and humidity necessary for maximizing fresh forage production in the system.

HNS사고는 대규모 화재와 폭발을 수반하며, 다수의 인명사고와 주변지역에 극심한 환경오염을 야기함으로 신속한 의사결정을 통하여 광범위한 확산을 막아야 한다. 본 연구는 국내 HNS사고사례를 해상이라는 특수성이 반영된 표준코드를 바탕으로 고품질, 표준화, 디지털화된 HNS사고 데이터베이스를 구축하여 사고발생 시 신속하고 합리적인 의사결정을 지원하고, 체계적인 통합관리 및 공유가 가능한 HNS사고이력관리시스템(HATS)을 설계하고 구현하였다. 또한 개발된 시스템을 활용하여 23년간 수집된 국내 HNS사고데이터 76건에 대해 각 항목별로 통계분석을 수행하여, 국내에서는 매년 평균 3.3건의 사고가 일어나며, 주요 HNS사고요인은 춘계기간 (41%), 계류장 (51 %), 케미컬운반선 (49 %), 승무원에 의한 과실 (45 %), 자일렌류 (12 %)인 것으로 확인되었다. (괄호안 : 사고분류기준별 해당 사고요인의 퍼센트 비율임)

Semiconductor is one of the biggest export items in Korea and one of future foods. In this study, the development of the product due to the repetition of the engineer mistakes repeatedly occurred due to the experience and habit of the individual in the semiconductor design process until now, resulting in an increase in the development period of the product and the economic loss of sales. As a result, the need for database of engineers' knowledge and know-how has emerged. This study investigate show to integrate and utilize data that is not managed on On/off-line for semiconductor knowledge and know-how. To do this, we intend to construct a RCT(RootCauseTracker) system that enables statistical analysis of the data on design failure accumulated over the previous year in any company.

Semiconductor processes are mainly divided into FAB process, package and test. The FAB process is promoting smart factories over a long period of time. The situation of the package and test process is manual, but there is a wafer testing process that prepares the latest topic "SmartFactory". The purpose of this study is to study the key variables for the completion of the material allocation scheduling system which will be the base environment of the smart factory in the wafer test process and to build the system based on the designed research model.

Surge pressure is created by rapid change of flow rate due to operation of hydraulic component or accident of pipeline. Proper control of surge pressure in distribution system is important because it can damage pipeline and may have the potential to degrade water quality by pipe leakage due to surge pressure. Surge relief valve(SRV) is one of the most widely used devices and it is important to determine proper parameters for SRV’s installation and operation. In this research, determining optimum parameters affecting performance of the SRV were investigated. We proposed the methodology for finding combination of parameters for best performance of the SRV. Therefore, the objective function for evaluate fitness of candidate parameters and surge pressure simulation software was developed to validate proposed parameters for SRV. The developed software was integrated into genetic algorithm(GA) to find best combination of parameters.

Structural dynamic system involves random variables conditions such as material property, geometric parameters and applied loads. This uncertainties result from the structural parameter are carefully considered the dynamic structural response in displacement, stress, and natural frequencies. The random vibrational system must be designed to withstand a certain amount of the fluctuation with respect to the uncertainties. Harmonic response of a spring-mass system is mathematically modelled with the probabilistic finite element method using the Monte Carlo simulation. The aim of this paper is to find the optimal lowest frequency for the spring-mass system with random input variables and response parameters to the displacements. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical optimal design evaluation method is proposed for the design of the harmonic system. The numerical results are obtained where the next highest frequency of the system and displacements treated as constraints.

The objective of this research is to development of a parametric design system for membrane structures. The parametric design platform for the spatial structures has been designed and implemented. Rhino3D is used as a 3D graphic kernel and Grasshopper is introduced as a parametric modeling engine. Modeling components such as structural members, loading conditions, and support conditions are developed for structural modeling of the spatial structures. The interface module with commercial structural analysis programs is implemented. An iterative generation algorithm for design alternatives is a part of the design platform. This paper also proposes a design approach for the parametric design of Spoke Wheel membrane structures. A parametric modeling component is designed and implemented. SOFiSTik is examined to interact with the design platform as the structural analysis module. The application of the developed interface is to design optimally Spoke Wheel Shaped Ductile Membrane Structure using parametric design. It is possible to obtain objective shape by controlling the parameter using a parametric modeling designed for shape finding of spoke wheel shaped ductile membrane structure. Recently, looking at the present Construction Trends, It has increased the demand of the large spatial structure. But, It requires a lot of time for Modeling design and the Structural analysis. Finally an optimization process for membrane structures is proposed.

The purpose of this study was to investigate the effects of occipital bone stimulation by cervical stabilizing exercise on the muscle tone, stiffness, ROM, and cervical lordosis in patient with forward head posture( FHP). This study was a case study of a single patient with forward head posture. This study used a ABA' design, A and A' were the baseline phases and B was the intervention phase. The intervention was occipital bone stimulation by cervical stabilization exercise. It was administered once daily for 7 days. The therapist kept hands together, and placed the two index fingers under the subject's occipital bone. The subject performed the chin-in exercise with a maximum isometric contraction for 20 sec.The exercise was implemented by performing the movements 10 times as a set and repeating the set three times. The muscle tone was not significantly changed after intervention. However, the stiffness was decreased and lasted the effect lasted without intervention. The cervical flexion angle was increased, but the cervical extension angle was not significantly changed after the intervention. The left and right lateral flexion angles were increased and the effect lasted without any intervention. However, the left and right rotation angles were significantly changed after the intervention. Cervical lordosis increased not from 37° to 41° after the intervention. These results suggest that occipital bone stimulation by cervical stabilizing exercise had a positive effect on cervical stiffness, flexion and lateral flexion ROM, and lordosis in a patient with forward head posture.

NSS (Navigation satellite system) provides the information for determining the position, velocity and time of users in real time using satellite-networking, and is classified into GNSS (Global NSS) and RNSS (Regional NSS). Although GNSS services for global users, the exactitude of provided information is dissatisfied with the degree required in modern systems such as unmanned system, autonomous navigation system for aircraft, ship and others, air-traffic control system. Especially, due to concern about the monopoly status of the countries operating it, some other countries have already considered establishing RNSS. The RNSS services for users within a specific area, however, it not only gives more precise information than those from GNSS, but also can be operated independently from the NSS of other countries. Thus, for Korean RNSS, this paper suggests the methodology to design the satellite constellation considering the regional features of Korean Peninsula. It intends to determine the orbits and the arrangement of navigation satellites for minimizing PDOP (Position dilution of precision). PGA (Parallel Genetic Algorithm) geared to solve this nonlinear optimization problem is proposed and STK (System tool kit) software is used for simulating their space flight. The PGA is composed of several GAs and iterates the process that they search the solution for a problem during the pre-specified generations, and then mutually exchange the superior solutions investigated by each GA. Numerical experiments were performed with increasing from four to seven satellites for Korean RNSS. When the RNSS was established by seven satellites, the time ratio that PDOP was measured to less than 5 (i.e. better than ‘Good’ level on the meaning of the PDOP value) was found to 94.3% and PDOP was always kept at 10 or less (i.e. better than ‘Moderate’ level).

A new design concept for integrated thermal energy storage system is suggested to increase energy saving rate for heating and cooling system of the closed glass greenhouse. Heat pump of air source is installed in the mechanical room and air flows then controlled by damper system located between the greenhouse and outdoor environments. A damper control algorithm is designed to enhance the usage of excessive energy in the glass greenhouse. Since the proposed system is installed at the actual glass greenhouse site for experimental verification of energy savings, the proposed system with damper control is compared with conventional greenhouse heating and cooling system. From results, it is found that more than 10% increase of energy saving rate is achieved.