The removal of organic carbon and nutrients (i.e. N and P) from wastewater is essential for the protection of the water environment. Especially, nitrogen compounds cause eutrophication in the water environment, resulting in bad water quality. Conventional nitrogen removal systems require high aeration costs and additional organic carbon. Microbial electrochemical system (MES) is a sustainable environmental system that treats wastewater and produces energy or valuable chemicals by using microbial electrochemical reaction. Innovative and cost-effective nitrogen removal is feasible by using MESs and increasing attention has been given to the MES development. In this review, recent trends of MESs for nitrogen removal and their mechanism were conclusively reviewed and future research outlooks were also introduced.

표고(Lentinula edodes), 노루궁뎅이(Hericium erinaceus), 느타리(Pleurotus ostreatus)의 버섯수확후배지(spent mushroom substrate, SMS)를 퇴비화에 활용하였다. 퇴비화 온도변화는 50oC 이상에서 7일에서 10일 동안 지속 되어 30일에 부숙이 완료되었다. 퇴비화 된 LeCSMS, HeCSMS는 130%, 80% 무종자에 대한 종자 발아지수를 보여 부숙도에 대한 종자 발아지수를 충족하였다. 퇴비화에 따른 물리 화학적 변화를 조사한 바 pH 범위가 4-5 에서 6-7로 증가 되었고 EC는 1-1.4 dS/m로 소폭 감소 되었으며 유기질 함량은 LeCSMS에서 36.9%로 SMS에 비하여 60% 이상 가장 큰 폭으로 감소 되었다. LeCSMS 를 기준으로 N (1.2%), P(2.3%), K(0.77%)함량이 조사되었으며 중금속은 모든 CSMS에서 기준치 이하였으며 Ca, Mg는 30%에서 60%이상 증가하였다. C/N비는 LeCSMS, HeCSMS에서 15% 낮았으나 PoCSMS에서 32%로 높게 나타났다. LeCSMS 처리에 따른 고추 유묘 생육효과는 시판 유기퇴비 처리구 등 대조 구에 비하여 초장이 60% 이상 높게 성장했으며 옆폭, 옆장, 옆수에서 다른 대조 구 에 비하여 모두 우수한 생육 효과를 보였다.

In this study, to improve the logistics flow of existing given chemical logistics warehouse, four logistics flow alternatives were proposed to minimize truck interference by building simulation model. The simulation model for chemical storage warehouse was built to evaluate system performance. Among the four new improved alternatives based on the basic model, the model with the same truck’s pathways and locations of facilities identified an increase in the number of interferences but a decrease in daily working hours as the number of resources in a particular facility increases. Therefore, the three groups were classified as ‘efficiency’, ‘complementary’, and ‘safety’ based on the daily working hours, and the ratio of trucks entering two types of logistics warehouse was set in consideration of future market fluctuations. For each of the six types, the optimal number of resources was selected as the number of resources in the facilities with the least number of interferences in the basic model and the evaluation measures and characteristics set in this study were compared and analyzed. As a result, the Alternative 4 model operating the underground roadway produced interference between 17.0% and 36.4% of the basic model, with 113.3% of the interior loadspace.

In the early stage of foreign element words entering the Chinese system, the translator of Huaxue Jianyuan has established the translation principle of element names. It mainly uses monosyllable and phonetic Chinese characters. It determines 48 transliteration elements either by referring to the transliteration of element names in Jinshi Shibie or by self-formulation. 47 out of 48 characters are ligatures, 21 of which are newly-formed, and 26 are borrowed from unfamiliar inherent Chinese characters. It presents the characteristics of high proportion of new characters, strong systematicness and applicability. There are 48 transliterated element names with recorded characters used by translators, 34 of which are still in use today. The transliteration principles established by translators and the selection or creation methods of transliterated element name characters have a great influence on the subsequent element name characters.

This study investigated the volatile flavor composition of essential oils from Solidago virga-aurea var. asiatica Nakai with different harvesting area. The essential oils obtained by the hydrodistillation extraction method from the aerial parts of the plants were analyzed by gas chromatography (GC) and GC-mass spectrometry (GC-MS). Ninety-five (91.61%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Koheung, Jeolanamdo. The major compounds were hexadecanoic acid (29.22%), 7-hexyl eicosane (9.12%), spathulenol (7.701%), 3,8-dimethyl decane (6.48%), caryophyllene oxide (4.52%) and α-copaene (4.23%). Fifty-seven (97.43%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Seoguipo, Jejudo. The major compounds were 2-carene (40.95%), α-copaene (10.77%), α-muurolene (5.81%), and spathulenol (3.11%). The chemical composition of the essential oils was significantly different in quality and quantity with the different harvesting area. The quantitative variations of hexadecanoic acid, 7-hexyl eicosane, spathulenol, 3,8-dimethyl decane, caryophyllene oxide, 2-carene, and α-copaene according to different harvesting area can serve as a quality index of the S. virga-aurea var. asiatica Nakai essential oils in food industries.

1,3,5-benzenetricarbonyl trichloride는 3개의 아실클로라이드가 벤젠고리 1,3,5에 위치한 화학물질로, 높은 가교도 를 통한 물리적⋅화학적 특성을 요구하는 곳에 사용하는 중요한 화학물이다. 특히 일정 기공크기를 갖고 있는 3차원 구조체 형성이 가능하여, 다양한 분리 정제 분야에 사용되고 있다. 하지만 아실클로라이드의 높은 반응성은 반응속도가 빠른 장점을 갖고 있지만, 다른 측면에서는 일정한 성능을 가질 수 있도록 화학적 제어가 어려운 점도 있다. 따라서 본 연구에서는 1,3,5- benzenetricarbonyl trichloride의 화학적 변화가 어떻게 분리막 성능에 영향을 주는지 관찰하였다.

The concentrations of odor and volatile organic compound (VOC)-inducing substances were measured using selected ion flow tube mass spectrometers (SIFT-MS). SIFT-MS can continuously measure the concentration of odor-causing substances and VOCs in real time without pre-treatment steps. Measurements were conducted during the day and at night at 10 spots in the chemical block of the Sihwa industrial complex. Similar measurement results were observed in the daytime and nighttime for materials except methyl ethyl ketone with high concentrations. A high concentration of hydrogen sulfide was also measured at night. It is expected that an amount of emissions of VOCs and odor-causing substances under the absence of inspection can be traced if measured at other industrial complexes in vulnerable times.

산느타리 배지재료별 적정 혼합비율을 구명하기 위하여 1 kg 봉지재배를 통해 배지의 화학성과 2주기까지의 버섯 수량간 관계를 분석한 결과, 1주기 버섯 수확량은 총 질소량과 상관을 보였는데, 총 질소량 1.1% 부근에서 최대 의 수량을 보였고 그보다 질소량이 적거나 많은 경우 수 량이 적어지는 경향을 보였다. 또한 2주기 버섯 수확량은 총질소, 총탄소, C/N율 등 여러 가지 화학성과 높은 상관을 보였는데, 질소함량 1% 이상의 구간에서 질소함량이 높을수록, 탄소함량 13% 이상의 구간에서 탄소함량이 높을수록 수량이 증가되는 양상을 보였다. 따라서 산느타리 재배시 혼합배지의 질소함량이 1.1% 정도인 경우 1주기 버섯수량이 가장 높았고, 2주기 수량은 질소와 탄소의 함량이 높은 배지에서 높은 경향을 보였다. 다만, 면실피가 다량 첨가된 배지에서 대두박과 케이폭박이 합계 20% 첨가되면 버섯 발생에 문제가 생길 수 있으므로 주의해야 할 것이다.

Synthesizing one-dimensional nanostructures of oxide semiconductors is a promising approach to fabricate highefficiency photoelectrodes for hydrogen production from photoelectrochemical (PEC) water splitting. In this work, vertically aligned zinc oxide (ZnO) nanorod arrays are successfully synthesized on fluorine-doped-tin-oxide (FTO) coated glass substrate via seed-mediated hydrothermal synthesis method with the use of a ZnO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Zn metal thin film. The structural, optical and PEC properties of the ZnO nanorod arrays synthesized at varying levels of Zn sputtering power are examined to reveal that the optimum ZnO nanorod array can be obtained at a sputtering power of 20W. The photocurrent density and the optimal photocurrent conversion efficiency obtained for the optimum ZnO nanorod array photoanode are 0.13 mA/cm2 and 0.49 %, respectively, at a potential of 0.85 V vs. RHE. These results provide a promising avenue to fabricating earth-abundant ZnO-based photoanodes for PEC water oxidation using facile hydrothermal synthesis.

CFRP materials are one of the excellent lightweight materials of the next generation. Also, the CFRP materials are attracting materials form the global automotive industry. However, CFRP material is made at a high cost of carbon fiber as raw material, so research of production cost reduction into the development of molding equipment and molding process technology related to mass production for the automotive industry is actively administered. Generally, CFRP is known as a high corrosion-resistant material in which no corrosion occurs. However, the investigation of the relationship with corrosion behavior on the roughness of CFRP's conditions according to is rarely studied. In this paper, the surface roughness has conducted three surface roughness conditions given arbitrarily, and the electrochemical evaluation has performed under the electrolysis conditions of 5 wt.% NaCl, which is the salt-water test condition of vehicle parts in automotive industries. Moreover, the samples were analyzed with changes of microstructures by FE-SEM and chemical composition's variation by EDS before and after electrochemical evaluation.