내화 구조물에서는 환기 계수, 재료 탄성 계수, 항복 강도, 열팽창 계수, 외력 및 화재 위치에서 불확실성이 관찰된다. 환기 불확실성 은 화재 온도에 영향을 미치고, 이는 다시 구조물 온도에 영향을 미친다. 이러한 온도는 재료 특성과 함께 불확실한 구조적 응답으로 이어지고 있다. 화재 시 구조적 비선형 거동으로 인해 몬테카를로 시뮬레이션을 사용하여 화재 취약성을 계산하는데, 이는 시간이 많 이 소요된다. 따라서 머신러닝 알고리즘을 활용해 화재 취약성 분석을 예측함으로써 효율성을 높이고 정확성을 확보하려는 연구가 진행되고 있다. 이 연구에서는 화재 크기, 위치, 구조 재료 특성의 불확실성을 고려하여 철골 모멘트 골조 건물의 화재 취약성을 예측 했다. 화재 시 비선형 구조 거동 결과를 기반으로 한 취약성 곡선은 로그 정규 분포를 따른다. 마지막으로 제안한 방법이 화재 취약성 을 정확하고 효율적으로 예측할 수 있음을 보여주었다.

The entire industry is increasing the use of big data analysis using artificial intelligence technology due to the Fourth Industrial Revolution. The value of big data is increasing, and the same is true of the production technology. However, small and medium -sized manufacturers with small size are difficult to use for work due to lack of data management ability, and it is difficult to enter smart factories. Therefore, to help small and medium -sized manufacturing companies use big data, we will predict the gross production time through machine learning. In previous studies, machine learning was conducted as a time and quantity factor for production, and the excellence of the ExtraTree Algorithm was confirmed by predicting gross product time. In this study, the worker's proficiency factors were added to the time and quantity factors necessary for production, and the prediction rate of LightGBM Algorithm knowing was the highest. The results of the study will help to enhance the company's competitiveness and enhance the competitiveness of the company by identifying the possibility of data utilization of the MES system and supporting systematic production schedule management.

밸브의 내부 누설 현상은 밸브의 내부 부품의 손상에 의해 발생하며 배관 시스템의 사고와 운전정지를 일으키는 주요 요인이 다. 본 연구는 버터플라이형 밸브의 내부 누설에 따라 배관계에서 발생하는 음향방출 신호를 이용하여 배관 가동 중 실시간 누설 진단의 가능성을 검토하였다. 이를 위해 밸브의 작동 모드별로 측정한 시간영역의 AE 원시신호를 취득하였으며 이로부터 구축한 데이터셋은 데 이터 기반의 인공지능 알고리즘에 적용하여 밸브의 내부 누설 유무를 진단하는 모델을 생성하였다. 누설 유무진단을 분류의 문제로 정의 하여 SVM 기반의 머신러닝과 CNN 기반의 딥러닝 분류 알고리즘을 적용하였다. 데이터의 특징 추출에 기반한 SVM 분류 모델의 경우, 이 진분류 모델에서 구축된 모델에 따라 83~90%의 정확도를 나타냈으며, 다중 클래스인 경우 분류 정확도가 66%로 감소하였다. 반면, CNN 기반의 다중 클래스 분류 모델의 경우 99.85%의 분류 정확도를 얻을 수 있었다. 결론적으로 밸브 내부 누설 진단을 위한 SVM 분류모델은 다중 클래스의 정확도 향상을 위해 적절한 특징 추출이 필요하며, CNN 기반의 분류모델은 프로세서의 성능 저하만 없다면 누설진단과 밸브 개도 분류에 효율적인 접근방법임을 확인하였다.

본 연구는 입목재적 계산에 기본이 되는 수간고별 직경 추정에 있어 머신러닝 기반 학습모델의 적용 가능성을 알아보기 위해 수행되었다. 이를 위해 전국에 분포하는 상수리나무 표준목에서 얻은 자료를 이용하여 Kozak Model (Model 1)과 Random Forest Model (RF, Model 2 to 4)로부터 수간고별 직경 값을 도출하였고, 이를 비교분석 하였다. RF는 입지환경 요소를 학습에 활용하여 3가지 모델 (Model 2 (수고, 흉고직경), Model 3 (수고, 흉고직경, 입지환경 요소), Model 4 (수고, 입지환경 요소))로 개발하였다. 모델의 적합도를 검증하기 위해 적합도 지수(Fitness Index), 편의(Bias), 평균절대편차(Mean Absolute Deviation), 평균 제곱근 오차(Root Mean Square Error)를 이용하여 모델의 적합성을 비교하였다. 분석 결과, Kozak 모델(FI = 0.9695, Bias = 0.0292, RMSE = 1.5155, MAD = 1.1248) 에 비해 RF모델이 전반적으로 수간고에 따른 직경을 잘 예측하는 모델로 나타났으며, RF 중에서도 입지환경 요소를 학습에 활용한 Model 3의 경우(FI = 0.9740, Bias = 0.0186, RMSE = 1.3995, MAD = 0.9746) 가장 우수한 성능을 보인 것으로 나타났다. 다만, 수간곡선을 통한 경향을 분석한 결과 일부 구간에서 수고의 변화에 따른 직경 추정에 이상치가 발생하여 추후에는 파라미터조절이나 새로운 모델 적용 등을 통한 연구가 필요한 것으로 판단되었다. 본 연구를 통해 추정된 Random Forest 기반의 수간고별 직경추정 모델은 개체목 재적산출에 활용되어 산림경영을 위한 기초자료로 활용될 가능성이 있을 것으로 예상된다.

In this study, we performed algorithms to predict algae of Chlorophyll-a (Chl-a). Water quality and quantity data of the middle Nakdong River area were used. At first, the correlation analysis between Chl-a and water quality and quantity data was studied. We extracted ten factors of high importance for water quality and quantity data about the two weirs. Algorithms predicted how ten factors affected Chl-a occurrence. We performed algorithms about decision tree, random forest, elastic net, gradient boosting with Python. The root mean square error (RMSE) value was used to evaluate excellent algorithms. The gradient boosting showed 10.55 of RMSE value for the Gangjeonggoryeong (GG) site and 11.43 of RMSE value for the Dalsung (DS) site. The gradient boosting algorithm showed excellent results for GG and DS sites. Prediction value for the four algorithms was also evaluated through the Receiver operating characteristic (ROC) curve and Area under curve (AUC). As a result of the evaluation, the AUC value was 0.877 at GG site and the AUC value was 0.951 at DS site. So the algorithm‘s ability to interpret seemed to be excellent.

Anomaly detection of Machine Learning such as PCA anomaly detection and CNN image classification has been focused on cross-sectional data. In this paper, two approaches has been suggested to apply ML techniques for identifying the failure time of big time series data. PCA anomaly detection to identify time rows as normal or abnormal was suggested by converting subjects identification problem to time domain. CNN image classification was suggested to identify the failure time by re-structuring of time series data, which computed the correlation matrix of one minute data and converted to tiff image format. Also, LASSO, one of feature selection methods, was applied to select the most affecting variables which could identify the failure status. For the empirical study, time series data was collected in seconds from a power generator of 214 components for 25 minutes including 20 minutes before the failure time. The failure time was predicted and detected 9 minutes 17 seconds before the failure time by PCA anomaly detection, but was not detected by the combination of LASSO and PCA because the target variable was binary variable which was assigned on the base of the failure time. CNN image classification with the train data of 10 normal status image and 5 failure status images detected just one minute before.

In this study, the energy use of buildings was compared and analyzed by using weather data predicted with machine running techniques. Python was used as a predictive program to predict weather data and TRNSYS was used to simulate the energy usage of buildings. For weather forecasting, weather data from 1 August to 7 August were studied to forecast ambient air temperature and solar radiation. The lowest error came in seven days, with the outside air temperature standing at 1.8 percent and the solar radiation at 2.4 percent. The energy use of the building was simulated by using weather data predicted through the 7 days learning data with the lowest error. As a result , the error rate of cooling energy use was 1.92%, the sum of cooling energy and lighting energy use was 1.79%, and the building control by using predicted weather data didn’t show a big difference with just control.

In this research, we evaluate on the disassemblability of recycling process for vehicle front door using the symbolic chart method and machine-learning algorithm. It is applied to the front door of 1600cc class vehicle, and then the conventional steel door and CFRP door were compared. Based on the principle symbolic chart method, the number of processes can be different according to decomposer proficiency of suitability of recycling process, so the evaluation method is required to supply this issue. The machine learning algorithm, and artificial intelligence method were applied and the applicable tools for each experiment were used to compensate the variations in the number of processes according to different proficiencies. Because CFRP front door has integrated components compare to steel door, so its disassemblability processes were decreased to 80 from 103 of the conventional steel door’s. It can be confirmed that the disassemblability was increased from the suitability of recycling equation. In case of the steel, disassemblability was approximately 60.6, in case of the CFRP is approximately 72 for car front door. Therefore, it can be concluded that the disassemblability of CFRP was better in the evaluation of suitability of recycling.

최근 머신러닝은 빅데이터에 대한 분석방법으로서 학습을 통한 지능화된 문제해결 방안으로서 관심이 증가하고 있다. 본 논문은 LBSN 데이터와 머신러닝 방식을 이용하여 토지이용현황을 파악하는 분석을 시도하였다. 도시계획에 있어서 토지이용현황의 파악은 직접적인 현장 조사에 의존해 왔다. 최근 스마트폰 사용자가 증가하면서 등장하고 있는 위치기반 소셜미디어의 자료들 은 토지이용의 상황을 반영하는 빅데이터로서, 머신러닝 방법론은 이들에 대한 자동화된 분석을 할 수 있게 한다. 본 연구에서는 LBSN 자료와 머신러닝 기법을 이용하여 토지이용을 예측하는 모델을 개발하여 실제 토지이용현황 자료와의 비교분석을 수행하였다. 이러한 분석을 통해 LBSN자료를 이용한 토지이용현황의 자동화된 분석 방안에 대해 연구하였다.

In order to reduce damages to major railroad components, which have the potential to cause interruptions to railroad services and safety accidents and to generate unnecessary maintenance costs, the development of rolling stock maintenance technology is switching from preventive maintenance based on the inspection period to predictive maintenance technology, led by advanced countries. Furthermore, to enhance trust in accordance with the speedup of system and reduce maintenances cost simultaneously, the demand for fault diagnosis and prognostic health management technology is increasing. The objective of this paper is to propose a highly reliable learning model using various machine learning algorithms that can be applied to critical rolling stock components. This paper presents a model for railway rolling stock component fault diagnosis and conducts a mechanical failure diagnosis of motor components by applying the machine learning technique in order to ensure efficient maintenance support along with a data preprocessing plan for component fault diagnosis. This paper first defines a failure diagnosis model for rolling stock components. Function-based algorithms ANFIS and SMO were used as machine learning techniques for generating the failure diagnosis model. Two tree-based algorithms, RadomForest and CART, were also employed. In order to evaluate the performance of the algorithms to be used for diagnosing failures in motors as a critical railroad component, an experiment was carried out on 2 data sets with different classes (includes 6 classes and 3 class levels). According to the results of the experiment, the random forest algorithm, a tree-based machine learning technique, showed the best performance.