This study investigated the characteristics and changes of cotton and silk textile production in Honam district, especially in Gurye, Jella Province from the 1930s to the 1980s. To do this, research method in this study was both literature and fieldwork research and results were as follows. First, in terms of cotton fiber cultivation of Gurye, Chinese Cotton(在來綿) has been substituted for America Cotton(陸地綿) and additionally, Yellow Cotton (黃綿) has been cultivated in the 1930s. Also, in terms of silk fiber cultivation of Gurye, Joseon Silkworm has been substituted for Japanese Silkworm by inflowing the Japanese mulberry tree. Second, in terms of spinning method, cotton spinning has been conducted at every house by an individual tool from the 1930s to the 1950s and has been gradually changed to mechanization by market shop equipped with mechanized cotton gin and cotton whipping tool. However, there have been no changes in silk spinning method from the 1930s to the 1980s. Third, loom type has been changed from the traditional Korean back-strap loom to the treadle loom between the 1930s and the 1940s. Fourth, dyeing was conducted by chemical dyestuff after weaving. The circulation of textile was done through the joint market by Japan in the 1930s~1950s and has changed to the market sales by producers since the 1950s. Fifth, since the 1970s, the outputs of cotton and silk textile of Gurye have been reduced. This was connected with the westernization and the inflow of the synthetic fiber and cloth in cotton and was related to the changes of the nation policy and silk fiber inflow from the china to the Korean farm villages.
Dyed loess and charcoal fabrics are sold in market as bedding. They have a lot of functions so that people are getting to increase their expenditure for them. Thus we investigated a repellent effect of loess fabrics and charcoal fabrics against house dust mites. The evaluation of the repellent effect of dyed loess fabrics and charcoal fabrics was conducted by using Dermatophagoides farinae and D. pteronyssinus. We compared the repellent effect of dyed loess fabrics at different doses of 0.3, 1.0, 3.2, 10.0 ㎎/㎠ and dyed charcoal fabrics at different doses of 0.3, 0.6, 1.0 ㎎/㎠. Commercial loess fabrics did not have a repellent effect against house dust mites. but commercial charcoal fabrics had the repellent effect by 78% against them. In case of dyed charcoal fabrics added with charcoal powder over 0.6 ㎎/㎠, they showed the repellent effect by over 80%. These results suggest that loess fabrics and charcoal fabrics have a repellent effect of against house dust mites and they can be commercially used for the purpose.
본 연구는 직물구조인자인 위사밀도와 직물의 조직을 변화시켜 시직한 면직물을 이용하여 역학특성 및 태의 변화를 KES-FB System을 이용하여 측정하였다. 그 결과 위사밀도가 증가할수록 굽힘특성 및 전단특성이 증가하는 것으로 나타났고, 위사밀도의 변화에 따른 역학특성치 중 굽힘 및 전단특성의 값은 평직이 높게 나타났으며, 인장특성, 압축특성 그리고 표면특성의 값은 조직 및 밀도에 크게 영향을 받지 않는 것으로 나타났다. 한편, 위사밀도 변화에 따른 의복착용성능 중 WC/T, MMD/SMD를 제외한 B/W 및 2HG/G, 2HB/B, 2HB/W, W/T, 그리고 WC/W는 위사밀도에 영향을 받는 것으로 나타났다. 위사방향의 직축은 굽힘특성, 전단특성, 압축회복도(RC), 표면거칠기(SMD), 태와 의복착용성능에 높은 상관을 보이는 것으로 나타났다. 그리고 Tightness는 굽힘특성, 전단특성, 압축특성 그리고 표면 마찰계수와 높은 상관을 보였고, 기본태 및 T.H.V., 의복착용성능에도 높은 상관이 있는 것으로 나타났다.
본 연구의 목적은 적응신경망퍼지추론시스템(ANFIS)과 회귀분석을 활용하여 7가지 역학적 특성치를 갖는 면직물의 시각적 질감을 해석하고 두 가지 방법을 비교하는 것이다. AMFIS는 퍼지 소속 함수와 신경망 구조를 갖는 것으로 인간의 비선형적 감성예측에 유용한 도구이다. 상관관계 및 회귀 분석의 통계분석은 7가지 역학적 특성치가 주관적 질감과 선형의 관계가 있음을 나타내었지만 설명력이 높지 않았고, 선형 이외의 관련성과 변수들 간의 상호작용을 표현하기 어려운 문제가 있었다. 통계분석과 비교하여, ANFIS는 변수들 간의 비선형적인 관련성과 상호작용을 가시적으로 보여주는데 설명력 있는 유용한 도구였으나, 입력 변수 중 출력 변수에 영향력이 있는 변수를 변별하지 못하여, 생성된 규칙의 수가 복잡한 문제가 있었다. 따라서 ANFIS의 해석이 단순하고 의미있는 모델을 구성하기 위해서는 영향력 있는 출력 변수를 추출하고 나머지 변수를 유사하게 통제하는 실험 모델의 구성이 필요하다.
The procedure to prepare an acrylic emulsion water repellents by blending of arcylic copolymer, activated polyethylene, wax, and emulsifiers was published in the previous paper. After the treatment of the prepared water repellents on a cotton fabrics with and without textile finishing resin, washability, contact angle, tearing strength, and crease recovery were tested. As the result, there were remarkable improvements in physical properties. Proper curing temperature of the synthesized water repellents impellents was 150℃ : proper using concentration was 5wt% : sodium acetate was the best catalyst for water repellents among the used, and proper concentration was 1.0wt%.
1, 3-Di(2-dodecanoylaminoethyl)-2, 7-dioxy-1, 3, 6, 8-tetraazacyclodecane[DDTD] and sorbitan monostearate(SMS) were synthesized as a main component for softner. O/W type softner(DSA) was prepared by blending of DSA, SMS, polyoxyethylene(10) castor oil, glyceryl monooleate, and polyoxyethylene(7) stearyl ether. After treatment of DSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DSA was found to be durable softner with good softness.
1,3-Di(2-octadecanoyl)-2,7-dioxy-l,3,6,8-tetra aza cyclodecane [DDTC] was synthesized by reacting octadecanoic acid, 2,2'-di-aminodiethyl amine with urea. O/W type softner (STA) was prepared by blending DDTC and pentaerithritol monostearate with polyoxysthylene (20) oleyl ether, polyoxyethylene (10) castor oil, and PEG #1000-lauric acid ester. Treating STA to all cotton fabrics, the physical properties, such as tear strength, crease recovery, flexing abrasion resistance, and so on were measured. Resulting the measurements, STA was found to be durable softner with softness.
천연염색을 원예치료 프로그램에 활용하기 위한 자료 확보 차원에서 전통적인 청색염료인 대청(Isatis tinctoria)의 열수 추출물 1%액을 이용하여 염색온도와 시간을 달리하여 견과 면직물에 대한 염색성을 조사하였다. 염색 온도는 견직물의 경우 70~80℃에서, 면직물은 80~90℃에서 20분간 침지 염색을 하였으며, 매염은 명반[AlK(SO4)2·12H2O], 황산구리(CuSO4) 및 황산제1철(FeSO4)을 각각 3% 농도로 하여 25±2℃에서 20분간 후매염을 기본으로 하였다. 견과 면직물의 표면색은 R, RP 및 YR 계열로 나타났으며, 견과 면직물 모두 염색시간과 온도의 영향은 적게 받았으나 매염제 종류에 따른 차이가 컸다. 헌터 a값은 견직물의 경우 2.76~21.03, 면직물은 0.09~11.06을 나타냈으며, b값은 견직물의 경우 -0.16~16.50, 면직물은 -0.79~12.16을 나타내었다. 염색포의 ᐃE값은 견직물의 경우 27.23~44.11, 면직물은 11.36~20.98을 나타내었다. 따라서 견직물은 70~80℃, 면직물은 80~90℃에서 20분 정도로 염색을 하되, 매염제를 달리하여 다양한 색상으로 발색을 시키는 것이 좋을 것으로 생각된다.