PURPOSES : The purpose of this study is to investigate the tendency of material property estimation under different concrete distress conditions and curling conditions when non-destructive tests such as rebound hammer and surface deflection test are applied to concrete pavement. METHODS : Nondestructive tests using Schmidt hammer and Falling Weight Deflectometer were performed to inspect the expressway concrete pavements constructed more than 20 years ago. Some results were compared with core tested elastic modulus and compressive strength. RESULTS : As a result of the rebound test, the section with Alkali-Silica Reaction(ASR) distress was outside the range of the existing estimation formula, but the control section was found to be within the range of the existing estimation formula. As a result of the physical property estimation through deflection test, the section with ASR distress showed greater fluctuations in the estimated material properties and deflection ratio compared to the control section, showing that the ASR damage seems to affect the slab deflection behavior. CONCLUSIONS : The rebound test may not sufficiently reflect the decline in material properties due to concrete damage. The deflection test can obtain results that reflect the deterioration of material properties, but it was confirmed that significant variability may occur, so it seems to necessary to perform complementary indoor core tests with nondestructive testing(NDT) tests.

In this study, a mixed resin containing Bis-GMA was developed to produce a light-emitting sign using quantum dots. As a result of measuring the viscosity, color coordinates change, and luminance of the mixed resin, the following conclusions were obtained. The viscosity of the mixed resin decreased as the content of the diluent increased, and viscosity values ​​ranged from 3,627 to 1,349cps showed as a result. The viscosity of the mixed resin decreased as the temperature increased, and the viscosity showed a value of 5,156 to 1,132cps. For the optical properties of InP/GaP/ZnSe/ZnS quantum dots, the absolute quantum efficiency was 91% at 522nm and 90% at 618nm when the gallium was 0.01%. The luminance of the light-emitting sign using the resin mixed with quantum dots was showed 142.6cd/m2 in white and 104.2cd/m2 in the red region.

강-콘크리트 편개형 방폭문은 외피 구조로서의 강박스 내에 콘크리트 슬래브가 채워진 구조로서 힌지 및 렛치와 같은 지지부재에 의해 벽체에 고정되어 설치된다. 폭압이 작용하는 방향과 같은 정방향으로의 처짐 거동에 대해서는 많은 연구가 되어 왔으나, 부방향 처짐 거동에 대한 연구는 상대적으로 미흡한 수준이다. 본 연구에서는 폭압을 받는 편개형 방폭문의 부방향 처짐 단계에서 발생하는 반발 거동(rebound behavior)에 대해 유한요소해석으로 변수 분석을 하였다. 분석결과에 따르면 방폭문의 소성변형 내지는 파괴 정도, 반발작용 전후의 운동량 및 운동에너지 변화가 반발거동에 영향을 미치는 주요 요소로 분석되었다. 또한, 방폭문의 거동 특성이 준정 적 영역에 속하는 경우에 비해 충격영역에 속하는 경우에서 더 큰 반발력이 발생하는 것으로 나타났는데, 이와 같은 결과는 변형에너 지 보다 운동에너지가 상대적으로 더 크게 증가하는 충격영역에서의 거동 특성이 원인인 것으로 사료된다. 반발작용의 결과로 인해 지지부재에 과도한 변형이 발생할 수 있으므로 성능분석 및 설계 과정에서 이에 대한 고려가 필요하다. 또한, 부압이 미치는 영향을 검 토한 결과에 따르면 강-콘크리트 방폭문의 경우에서도 반발에 의한 영향 및 부압 모두가 방폭문의 부방향 처짐에 기여할 때 반발력이 상대적으로 더 크게 증가하는 것으로 나타났다. 이와 같은 중첩 효과의 발생조건은 구조체 특성 및 폭발조건 등에 따라 다를 수 있으므로 이에 대해서는 더 많은 연구가 필요할 것으로 판단된다.

Three-dimensional motion analysis systems and force plates are used for gait phase detection and ground reaction force(GRF) or ground reaction moment(GRM) data collection. But force plates as measurement systems are restricted to laboratory environments and have limitations for abnormal walking with foot dragging. Therefore the methods were proposed to compute the GRM from the kinematic data of three-dimensional motion analysis systems. Gait phase detection with kinematic data using foot velocity algorithm(FVA) was performed. The validity of gait phase detection was obtained comparing with the results of force plates. A gait model with 7 segments was composed to compute GRM. The results of gait model with kinematic data were compared with those of force plates. The result of the vertical direction is similar. But anterior-posterior direction and lateral direction show similar tendency with some gaps.

Recently, there are a lot of fires breaking out at special structures. To suppress this fire break down at early stage is very important because it leads to bigger damage in case of special structures. For early suppression, outer wall of building has to be destroyed and need waterproofing for Ignition temperature. So far there is no equipment developed local and all of them are imported from a broad. In this study, In this study, The CAE analysis was the Leading-in of the boom conditions for the development of demolition fire according to the environment of Korea. As a result of this, could be confirmed that decreases stress reduction. maximum 51% to 12% depending on the part. It was possible structural integrity and design. about Telescopic Boom and Outrigger on the basis of this result.

The purpose of this study was to assess the influence of two shoe size conditions on foot pressure, ground reaction force (GRF), and lower extremity muscle fatigue. Seven healthy men participated. They randomly performed walking and running in two different conditions: proper shoe size and 10 mm greater than proper shoe size. Peak foot pressure, and vertical, anterior and mediolateral force components were recorded with the Parotec system and Kisler force platform. To assess fatigue, the participants performed treadmill running for twenty-five minutes twice, each time wearing a different shoe size. Surface electromyography was used to confirm localized muscle fatigue using power spectral analysis of four muscles (tibialis anterior, gastrocnemius medialis, rectus femoris, and biceps femoris). The results were as follows: 1) In walking conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 1, 2, 14, and 18 (p<.05). 2) In running conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 5, 14, and 15 (p<.05). 3) In walking conditions, there was a significantly higher first maximal vertical GRF in the 10 mm greater than proper shoe size (p<.05). 4) In running conditions, no GRF components were significantly different between each shoe size condition (p>.05). 5) Muscle fatigue indexes of the tibialis anterior and rectus femoris were significantly increased in the 10 mm greater than proper shoe size condition. These results indicate that wearing shoes that are too large could further exacerbate the problems of increased foot pressure, vertical GRF, and muscle fatigue.

The purpose of this study was to assess the influence of spine orthosis and sit-to-stand motor strategies on ground reaction force (GRF) and lower extremity muscle activity. Twenty healthy adult men participated, and subjects randomly performed sit-to-stand motions in three different conditions: Momentum-transfer strategy (MTS); MTS with spine orthosis; and zero-momentum strategy (ZMS) with spine orthosis. GRF data, onset time, and muscle activity were determined and compared using force plate and electromyography. Data were statistically analyzed by the SPSS version 13.0. One-way repeated analysis of variance (ANOVA) was used to determine the statistical significance, and least significant difference was used as a post hoc test. The level of significance was .05. The results of this study were as follows: 1. Peak GRF and relative time to peak GRF were not significantly different in the three different conditions (p>.05). 2. Onset time of four muscles, tibialis anterior, gastrocnemius, biceps femoris and rectus femoris, in the three different conditions were significantly different (p<.05). 3. The tibialis anterior and rectus femoris muscle activity before hip-off and tibialis anterior, gastrocnemius, and rectus fermoris muscle activity after hip-off were significantly different in the three different conditions (p<.05).

연구의 배경 앉은 자세에서 일어서기는 일상생활동작중 흔한 동작중의 하나이다. 노인들을 포함한 많은 환자들은 앉은 자세에서 일어서기에 어려움이 있고 속도가 감소한다. 이 연구의 목적은 다른 두 속도로 앉은 자세에서 일어서는 동작을 실행할 때 최대 지면반발력의 세개의 요소를 비교하는 것이다. 대상자 22명의 건강한 성인 (20-36세)을 대상으로 하였다. 실험방법 앉은 자세에서 일어서기동작 수행중 최대 지면반발력을 측정하기 위하여 힘판을 사용하였다. 대상자

The freezing-thawing damage of concrete structures is difficult to identify quantitatively in field. Therefore in this study, the correlation between rebound hardness values by Schmidt hammer on concrete surface and relative dynamic modulus of elasticity which is the most quantitative measuring method of damage by freezing-thawing are reviewed. The results showed that those two factors have similar decreasing tendency according to development of freezing-thawing degradation.

저자들은 비파괴시험에 의한 고강도콘크리트의 강도 예측식을 제안하기 위하여 실험적 연구를 수행하였다. 본 연구에서 사용된 콘 크리트의 설계압축강도는 40~80 MPa 범위이며, 압축공시체를 제작하여 반발경도법과 초음파 속도법으로 실험한후 KS기준에 따라 압축강도 실험을 실시하였다. 실험결과는 기존의 연구자들에 의하여 제안된 다양한 실험예측식들과 비교분석하였다. 실험결과 고강도 콘크리트에서도 반발경도법과 초음파속도법의 경우 간편성과 신뢰성에 있어 콘크리트 강도를 측정하기에 충분한 유용성을 확보한 것을 확인할 수 있었다. 기 존식들과의 비교를 통하여 고강도 콘크리트에 적합한 강도예측식을 제안하였으며, 실험결과에 대한 충분한 신뢰성을 확보한 것으로 판단되 어, 향후 고강도 콘크리트 구조물에 적용할 수 있을 것으로 판단된다.

In classical dynamics, the coefficient of restitution is one of variables to estimate the amount of impulse. In general, we have considered the coefficient of restitution as a constant value. However, coefficient of restitution (COR) is the function of contact material and colliding velocity. Furthermore, COR is also a function of contact area. Thus, without considering the variable characteristic of COR, the actual motion of an object just after impact is not the same as we expect. A general COR model is proposed in this work and its effectiveness is verified through a cart impact experiment and its result is applied to simulation of a ball impact problem. A three-degree-of-freedom manipulator is employed as a test-bed.

By using non-destructive inspection equipment, ultrasonic and schmidt hammer, this research performed non-destructive inspection of underwater concrete for more efficient management in underwater concrete structures. And based on instrumented rebound hardness and ultrasonic pulse velocity, we developed the underwater concrete structures-strength estimation models using artificial neural network.

본 논문은 기존 수중 콘크리트 구조물의 강도관리 및 진단기술의 중요성은 날로 증가함에 따라 개발되고 있는 ROV (Remote Control Vehicle)에 탑재될 수 있는 비파괴 검사 장비를 개발하여 콘크리트 내부의 강도측정을 하고자하였다. 수중화된 슈미트해머와 초음파센서를 통하여 수중에 있는 콘크리트 공시체의 반발경도 및 초음파속도를 계측하여 실제 압축강도 값과 비교하였으며 이를 통하여 수중에서의 강도추정식을 도출하였다. 도출된 3가지 식 중에서 반발경도와 초음파속도를 복합적으로 사용하는 복합식이 가장 정확도가 높았으며 이에 따라 실제 수중에서의 콘크리트의 강도를 추정하고자 할 때 활용 가능성도 높아질 것으로 예상된다.

In this study, one of nondestructive evaluation (NDE)　techniques for the effective maintenance of underwater concrete structures are investigated: Ultrasonic Pulse Velocity Method and Rebound hardness Test. Currently, lots of ROV(Romotely Operated Vehicle) Systems to inspection Underwater Concrete Structures are being considered.

최근 구조물이 노후화되면서 기존 구조물과 시공품질을 관리하는 비파괴검사 평가의 요구가 증가되고 있다. 콘크리트 구조물의 압축강도 추정의 중요성이 건설업계에서 또한 점차적으로 증대되고 있는 실정이고, 시공관리와 품질관리에 있어서 중요한 요소이다. 본 연구는 콘크리트의 압축강도를 비교하기 위한 비파괴 검사법 중 슈미트해머 시험과 충격반향기법을 이용하여 수행되었다. 콘크리트 압축강도와 슈미트해머에 의한 반발경도 값과 충격반향기법 실험결과와의 관계를 알아내는데 초점을 두었으며, 콘크리트의 압축강도와 반발경도 값은 밀접한 관계가 있음을 알 수 있었다.

본 논문은 분사식 FRP의 압축 구속효과와 휨 보강 효과 및 분사식 FRP의 반발률에 대한 실험적 연구이다. 분사식 FRP란 레진과 짧게 잘려진 섬유를 고압의 공기에 의해 적용면에 분사하여 보강하는 기법이다. 분사식 FRP의 구속 및 휨 보강 효과를 알아보기 위하여 원주형 공시체와 휨 공시체를 제작하여 FRP를 분사하여 보강하였고, 보강 재료로 유리섬유와 폴리에스테르 수지를 사용하였다. 최적의 보강 조건을 알기 위해 섬유 길이, 보강 두께, 섬유 혼입비, 콘크리트 강도에 따른 실험을 실시하였고, 분사식 FRP 보강법을 섬유 매트에 의한 보강법과 비교하였다. 또한, 분사식 FRP의 반발률 역시 평가하였다. 실험을 통하여 분사식 FRP의 최적 조건을 결정하였다. 본 연구의 분사식 FRP 보강은 유리 섬유 매트에 의한 보강법 이상의 성능을 발휘하였다.