This paper is the result of a comparative analysis of crew members' workloads using the EMG and OWAS methods according to the fishing process before and after the improvement of the operating system of the experimental vessel, with the aim of improving operational efficiency and safety work of coastal improved stow net fishing vessels. The target crew members were three people with at least five years of experience on board the same fishing vessel as the experimental vessel. After improving the operating system, such as installing a power block crane and two capstans, change the location of the ball-roller, the time required for setting and hauling work decreased (p < .01), and the evaluation results by OWAS showed that the overall workload for setting and hauling net work decreased. The results of muscle activity analysis showed a decrease in lashing anchor work (p < .01) in the case of hauling net and in anchor dropping work in the case of setting net (p < .001). It is judged that the use of ball rollers in net handling has been reduced; consequently, work safety has been improved.

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain’s age, the captain’s career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were ‘hauling net operation,’ ‘readjustment and storage of fishing gear,’ and ‘fish handling’ and the hardest factor in fishing management were in the order of ‘reduction of catch,’ ‘labor shortage’ and ‘rising labor costs.’ The most institutional improvement that is most needed in coastal improved stow net fishery was an ‘using fine mesh nets.’ Most of the respondent to the questions on the experience in hiring foreign crews was ‘either hiring or willing to hire foreign crews,’ and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was ‘high labor costs.’ The degree of communication with foreign crews during fishing operation were ‘moderate’ or ‘difficult to direct work.’ The most important problem in hiring foreign crews (the first priority) was an ‘illegal departure.’ As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a ‘fish warehouse.’ The most preferred equipment for the construction of new fishing vessel were ‘engine operation monitoring’ and ‘navigation safety devices.’ The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.

This study was conducted to determine whether the layout of wheelhouse and work environment of coastal improved stow net fishing boats affect the physical abnormalities of wheelhouse workers through a survey and to use it as basic data to improve the wheelhouse work environment. The analysis results are as follows. The result of factor analysis on the wheelhouse work environment was classified into three factors: suitability of work environment, suitability of work space arrangement, and layout of navigational and fishing equipment. The result of factor analysis on physical abnormalities was divided into two factors: physical pain and fatigue. The results of regression model analysis showing factors affecting physical pain showed that the t-value in the regression model was 3.625 (p < 0.05), indicating that the work environment suitability had an effect on the physical pain. Work environment suitability had a significantly positive effect on the physical pain. As work environment suitability increased by 1, the physical pain increased by 0.371 (p < 0.05). The results of regression model analysis showing the influencing factors on fatigue were found to have a t-value of 3.009 (p < 0.05) in the regression model, indicating that the work environment suitability had a significantly positive effect on the feeling of fatigue. It was found that fatigue increased by 0.324 (p < 0.05) as the work environment suitability increased by 1. In addition, the manageability of task suitability was found to be t = –2.521 (p > 0.05). As the manageability of task suitability increased, the skipper’s fatigue level decreased. From these results, it is inferred that the wheelhouse of the current coastal improved stow net fishing boats causes physical pain and fatigue for the skippers. In order to reduce such physical pain and fatigue, and to improve safe fishing operation and job satisfaction, it is necessary to provide a wheelhouse to fishermen on coastal improved stow net fishing boats in consideration of the characteristics of the wheelhouse work of fishing boats and in consideration of users.

The adjudication of Korean Maritime Safety Tribunal (KMST) was analyzed to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) in stow net fishing vessel from 2015 to 2019. The personnel’s carelessness was the most common in 29 out of 33 accidents (87.9%), followed by 25 cases (75.8%) of inadequacy of instructions, 24 cases (72.7%) of inadequacy of education on hazard factor, 20 cases (60.6%) of no personal protection equipment, 18 cases (54.5%) of poor guard, 17 cases (51.5%) of inadequacy of work method, 16 cases (48.5%) of absence of emergency stop button, 14 cases (42.4%) of work practice of poor safety precautions that affected more than 40% of all accidents as accident causes. These causes had a strong influence on each other, and the ratio of accident causes is high. With this relationship, accidents can be prevented or the severity of human injury can be reduced if types of accident process can be estimated with a scenario, and the key points before the accident in the scenario are switched to safe points.

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel’s carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

서 언 저자들은 1995년 12월부터 2개년간에 걸쳐 농림수산부가 지원하는 농수산 첨단 연구 과제로서 “안강망 어로 시스템 자동화에 관한 연구 개발을 수행하였다. 이 해설에서는 상기 연구의 초기 단계에 저자들의 조사한 안강망 어선 어로 시스템의 현황과 개선점에 대하여 기술함으로써 향후 안강망어업 관련 연구의 기초자료를 제공하고자 한다.

International Maritime Organizatin(IMO) has been chosen some of agreements for regulating the international stability criteria of fishing vessels and recommended that each goverment adopts theirs into the domestic law. As a result, 77/93 Fishing Safety Agreement was ratified. Among the above agreement, contents of stability was not only applied to domestic law, but also strenghten considerably compared with existing stability criteria. And even if the calculation guide of stability with recommendations was regualted, Analysis of stability on domestic fishing vessels never have been used according to such a caculation method. Moreover, the caculation of stability criteria caused by strong wind, rolling effect and deck inflow was not considered in the existing basic design program. Therefore, the development of stability criteria program available for such a caculation has been of vital impotance. This research has developed a stability criteria program under 77/93 Fishing Safety Agreement. Also through development of stability criteria program, the stability performance of fishing vessel with 69ton stow-nesting was evaluated.

근해안강망업업에서 경제성이 있고 안전성이 향상된 어선의개발에 중요한 기본자료가 될 최적한어선의 규모 및 기본치수를 선정하게되는 본 연구는 그 내용을 최적규모에 영향을 주는 어업 및 어선의 기본성능분석과 최적규모 결정을 위한 시스템의 개발로 크게 구분할 수 있다. 최적규모에 여향을 주는 어업 및 어선의 기본성능분석에서는 근해안강망어업의 어업자원 평가, 어업실태조사 등을 하고, 기본성능의 분석은 대표적인 톤급에서 빈번히 살생되는 안전성, 조업성등과 어선의 기분수치와의 인과관계를 ISM기법으로 분석하여 최적규모 결정모델에 이용하였다. 한편 최적규모결정을 위한 시스템을 경제성 평가 및 최적화 모델 구성, 어선의 초기설계조직의 구성, 및 시스템분석 S/W개발로 구분하여 연구를 수행하였으며, 최종적으로 규모 및 기분치수를 찾았다. 근해안강망어업의 개발대상어선의 대표적인 톤급으로 냉동설비를 성치한현축식 89톤급 및 선미식 89톤급으로 구분하여, 즉 어선(I)군과 어선(II)군으로 분류아여 항해속력 9~11노트에서 최적규모 및 기본치수를 구하였다. 즉 어선(I)군과 어선(II)군에 대한 경제성 분석을 통하여 얻어진 결과에 의햐면 어선(I)군에서는 향해 속력 10노트에 현측식 89톤 근해안강망어선(냉동설비 설치)이 경제적인 것으로 평가된다. 특히 어선(II)군의 향해속력 10노트인 어선(II-2)군대상어선은 분석된 모든 어선중에서 가장 경제성이 좋고 안전성을 만족하고 있는 것으로 최정적인 결론을 얻게 되었따. 이와 같은 연구로부터 다음과 같은 결론을 도출하였다. 즉 우리나라 안강망어업에 적합하게 이용될 수 있다고 사료되는 89톤급 선미식 안강망어선의 기본치수는 배의 길이(Lpp):27.0~28.0m, 배의 폭(B):6.6~6.8m, 배의 깊이(D):2.75-2.85m,방형 계수Cb:03685-0.698, 항해 속력(Vs):10노트인 것으로 분석된다.