자율주행차 상용화 시대를 가속화하기 위해 실제 도로에서 다양한 실증 프로젝트를 수행중이다. 그러나, 자율주행차와 비자율주행차 가 혼재된 혼합교통류 환경에서 발생할 수 있는 다양한 문제의 원인을 파악하고 선제적인 안전대책을 강구하는 노력은 미비한 실정이 다. 특히, 기존 비자율주행차 측면의 주행안전성을 고려하여 설계된 도로 시설 특성으로 인해 자율주행차의 주행안전성이 저하될 수 있다. 또한 기존 비자율주행차의 주행안전성을 저해함과 동시에 자율주행차의 주행안전성도 저해하는 도로 시설 특성이 존재할 가능 성이 있다. 본 연구에서는 상암 자율주행차 시범운행지구에서 수집된 automated vehicle data (AVD)를 활용하여 자율주행차와 비자율주 행차의 주행안전성을 평가하고 도로 시설 특성 측면의 영향요인을 도출하였다. 주행모드별 주행안전성 평가를 위해 autonomous emergency braking system (AEBS) 위험 이벤트 기반의 driving risk index (DRI)를 개발하였다. 구간별 DRI가 발생하지 않은 구간을 very good으로 정의하고 발생한 구간을 25 percentile로 구분하여 good, moderate, poor, very poor 등급으로 정의하여 총 5개의 등급으로 구분 하였다. 또한, 현장조사을 수행함으로써 구간별 포함되어 있는 도로 시설 특성을 수집하였다. 주행모드별 주행안전성에 영향을 미치는 도로 시설 특성을 도출하기 위해 이항로지스틱 회귀분석을 수행하였다. 종속 변수의 경우 DRI 기반 안전등급 중 poor 이상 등급을 1, 그 외의 등급을 0으로 정의하였으며, 독립변수의 경우 현장조사를 통해 수집된 교차로 유형, 차로 수, 차로 폭, 추가차로 유무, 차량 진행방향, 불법주정차 유무, 버스정류장 유무, 자전거 차로 유무에 대해 명목형 변수로 설정하였다. 도출된 주행모드별 주행안전성 영 향 요인을 검토하고 향후 자율주행차 시대에 대비하여 선제적으로 개선이 요구되는 도로 시설 특성을 도출하고 도로 운영성 및 효율 성, 안전성 측면의 개선 방향을 제시하였다.

PURPOSES : In this study, a driving simulation testing equipment was developed to derive the optimal longitudinal tinting that can reduce the lateral vibration of the vehicle. Various types of longitudinal textures and tires were evaluated through simulation testing with the equipment. Based on the results, 3×3×16mm tinning as the optimal longitudinal texture was selected among 8 textures. METHODS : Based on the literature review, the causes of lateral vibration were analyzed, and parts and types for testing equipment development were reviewed. Driving simulation with testing equipment was conducted considering various textures and tires. To verify the test results, finite element analysis was performed under the similar conditions. And field test for two textures was conducted to find the optimal longitudinal texture. RESULTS : Based on the literature review, driving simulation test, finite element analysis and field test, longitudinal texture of 3×3×16mm is show the better performance compared to 7 textures. CONCLUSIONS : 3×3×16mm as longitudinal tinning for fresh concrete is show less lateral vibration than 3×3×12mm.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the driving directions of QR Code-aware movable robots during the development of QR Code-aware indoor mobility robots.

PURPOSES : The purpose of this study is to evaluate the road design elements affecting the lateral driving safety under high-speed driving conditions with a speed limit of 140 km/h and to derive useful implications to design of safer roads. METHODS : A full-scale driving simulator was used to evaluate the various design scenarios. Different regression techniques and a random forest method were adopted to conduct comprehensive comparisons among the simulation scenarios. The relationships between the safety indicators, including the frequency of the lane departures and the standard deviation of the lateral acceleration, and the design elements were explored in terms of lateral driving safety. RESULTS : The length of the combined alignment was found to be a significant factor affecting the lateral driving safety based on the analysis of the frequency of lane departures. Regarding the standard deviation of the lateral acceleration, it was identified that the length of the horizontal curve, the length of the bridge, and the right-side superelevation must be considered significant factors associated with driving safety while designing the road under high-speed driving conditions. CONCLUSIONS : Based on the findings of this study, a set of recommendations for designing roads was proposed. For example, the proper length of the combined alignment and the horizontal curve should be determined to prevent crashes due to hazardous lateral driving events because the installation of sufficient superelevation in the bridge section would be limited under high-speed driving conditions. In addition, applying a larger horizontal curve radius with longitudinal grooving is a promising approach to tackle risky driving conditions.

본 연구에서는 도시부도로의 곡선구간에서 주행차량의 횡방향 이격량을 분석하여 차량 주행에 필요한 최소 소요차로폭을 산정하였으며 본 연구결과와 선행연구에서 제시된 직선구간에서의 최소 소요차로폭을 비교 분석하였다. 이를 바탕으로 도로의 선형과 차종에 따라 곡선구간에서의 최소 소요차로폭을 제시하였다. 조사대상 곡선구간 도로의 차로폭은 2.79m~3.40m이다. 주행차량의 횡방향 이격량의 분포 및 조사대상 차량의 85%를 기준으로 누적분포를 분석하였다. 분석결과 곡선구간에서의 최소 소요차로폭이 소형차량의 경우 2.31m~2.58m, 대형차량의 경우 2.80m~3.27m로 산정되었다. 본 연구결과는 녹색교통 도입을 위한 공간, 도로공사 중, 소형차 전용도로의 건설 등에 활용될 수 있을 것이다. 또한 설계자의 목적에 따라 유연한 차로폭 설계기준의 적용에 필요한 기초적인 연구로 활용될 수 있을 것으로 기대된다.

The directions of the road are divided into two, the right-hand side and left-hand side of the road, by the convention and specific native method in the world. This paper deals with the characteristics and behaviors of drivers who are accustomed to drivin

For a mobile robot that travels along a terrain consisting of various geology, information on tire force and friction coefficient between ground and wheel is an important factor. In order to estimate the lateral force between ground and wheel, a lot of information about the model and the surrounding environment of the vehicle is required in conventional method. Therefore, in this paper, we are going to estimate lateral force through simple model (Minimal Argument Lateral Slip Curve, MALSC) using only minimum data with high estimation accuracy and to improve estimation reliability of the friction coefficient by using the estimated lateral force data. Simulation is carried out to analyze the correlation between the longitudinal and transverse friction coefficients and slip angles to design the simplified lateral force estimation model by analysing simulation data and to apply it to the actual field environment. In order to verify the validity of the equation, estimation results are compared with the conventional method through simulation. Also, the results of the lateral force and friction coefficient estimation are compared from both the conventional method and the proposed model through the actual robot running experiments.