Building hardware joints are welded in most cases, which have risks of fire and explosion. Besides, the secondary damage of the destruction of the welded parts can be caused by the horizontal displacement of the structure due to earthquake or wind load. This paper compared the horizontal displacement following abilities of welded building hardware and non-welded building hardware. To do this, We conducted actual formation shake table test, and checked on the horizontal displacement following ability of structure by comparing their responses to earthquake load. We made the 2m-high framework to examine the responses of the actually constructed building hardwares, and analyzed the displacement responses of the welded-typed, non-welded-typed, and cruciform bracket building hardwares. We conducted the test by increasing acceleration rate until displacement reached 40mm corresponding to allowable relative story displacement II. The result of the test showed that the building hardware using welding work made cracking and breakage on welded connections of welded building hardware, but non-welded building hardware with no use of welding work and cruciform bracket building hardware make no problem, and that non-welded building hardware is superior to that of the welded building hardware in the horizontal displacement following ability due to earthquake or wind load.

The purpose of this study was to comprehend the procurement system of iron materials and the production process of ironwork in royal tombs constructions in the later Joseon period. For this purpose, sixteen Sanneung-uigwes were analyzed. The following conclusions have been reached through the study. First, it was procuring five types of iron materials in constructions of royal tombs. Sincheol had been supplied up to the mid- 18th century. On the other hand, the amount of jeongcheol was increased rapidly. Because of the procurement system of initial tools was changed from bokjeong(a kind of tribute) to self-production in the Noyaso. Second, the government stockpiles were utilized as much as possible than bokjeong to manage the limited construction period and sudden construction start. Third, before moving the site of tombs, the melting furnace was installed in the Gungisi(armament factory). The amount of the melting furnace was increased from 5 to 8 since producing the initial tools in the Noyaso. Fourth, six kinds of master artisans were worked in the field of producing ironwork. Metal worker was assigned to one person per melting furnace. Fifth, the quality of final iron materials was controlled by use. Since the 19th century, it had been produced enhanced ironwork.

This study lists the vocabulary of the inscriptions on SeoGwol-YeongGeon-DoGam-UiGwe(西闕營建都監儀軌 1831). This study also deciphers and explains the meanings of them. In advance, this study compares them with the vocabulary of the national language in the middle ages and in modem times. There are two important missions in deciphering a transcription marking of the architectural vocabulary of UiGwe(儀軌). One is to gain an understanding of the reading method of transcription marking and the other is an explanation of what that means. As a result, we can correctly understand the UiGwe(儀軌) written in transcription marks. If we could decipher the transcription markings of the documents as it is, we cannot only recover plenty of vocabulary related with characteristic architecture in the age of the later Joseon Dynasty, but also correct wrongly used vocabulary in the present. As a result, we can standardize and adjust the vocabulary use of Korean traditional architecture. In advance, we can correct errors of spelling and mistaken explanations in the Korean Encyclopedia.

Since the 17th century, the society of Joseon dynasty belongs to a period of rapid transition in many fields. As the building is a result to be produced on the basis of a society and economy, the general transition in a society is to be reflected into a process of building construction. Especially, a study on the material supply system of economic base in a process of building construction is one of very important factors in an understanding or estimate of a building. On the premise, this paper is to examine the supply system of iron materials and the tools in the construction of the government managed buildings in the late of Joseon dynasty on a viewpoint of productivity. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. 1) The general supply method of iron materials for a large-scale government construction was based on 'byulgong', that is, a kind of tribute. 2) Various methods were selected in the supply method of iron materials for government use in the late of Joseon dynasty. The priority order of choice in its government policy was put on an easiness of amount security, on a minimum of expenditure, and on an efficiency of construction execution. 3) The manufacturing technique of weaponry was used in the production method of iron materials and the tools for government use. The cooperation of the official, the army, and the merchant had improved the manufacturing technique of building construction.

리모델링 시장이 커짐에 따라 품질이 우수한 건축물의 내장재 및 외장재들이 개발되고 있다. 개발된 내장재 및 외장재를 건축물의 구조체에 시공하기 위해서 구조체에 하지 철물을 설치하여야 한다. 건축물의 내장재 및 외장재 설치, 데크, 무대 및 마루 등의 시공 시 지지해주 는 하부 구조물을 하지철물이라 한다. 하지 철물은 수평재와 수직재를 현장에서 용접 접합을 하여 구조체에 설치하는 방법이 주로 사용되었다. 일반적인 용접접합 방식의 시공은 용접 불씨에 의한 화재 발생으로 인명 및 재산 손실 문제와 전문용접공 부족으로 인한 비전문 용접공 시공에 따른 내구성 저하 문제 등이 발생하고 있다. 하지철물의 시공방법도 안전사고 및 시공의 용이성을 위하여 용접 접합 방법에서 무용접 접합 방법 으로 개선되어지고 있다. 이는 화재예방 가설재와 소화장비 및 인원이 불필요하고 볼트조립으로만 시공이 가능하여 인건비 절감과 공기단축 이 가능하다. 이에 용접을 사용하지 않는 무용접 하지 트러스 공법을 이용하여 접합부 거동을 실험하여 검증하고자 한다. 또한, 무용접 접합방 법으로 시공 시 볼트 체결부분에서 틀어짐 현상이 발생하기도 하여 이를 보완하는 방법으로 각관, 유격방지 브라켓, 파스터, 홈볼트 체결을 통 하여 일반 볼트접합인 각관, 화스너, 홈볼트 조립방법에서 좌우간의 틀어짐 현상을 방지하고 부재간의 미끄러짐 현상을 제어할 수 있도록 하는 시스템을 적용하여 접합부의 거동을 평가하고자 한다. 그 결과 무용접 접합방식의 하지철물 골조는 지진하중저항시스템에서 내진등급에 따라 요구되는 허용 층간변위각 0.01∼0.02 보다 매우 큰 부재각까지 변형한 것으로 나타나 충분한 변형성능을 확보하고 있음을 알 수 있었다.

In recent years, non-welded building hardware that can be installed by bolt assembly is used. However, there is a need for a method to compensate for the occurrence of buckling at the bolted portion at the time of construction. The purpose of this study is to evaluate the behavior of joints between steel square pipe and fastener.

The non-welded building hardware method can reduce accidents caused by welding, and can be constructed by bolt assembly, which can reduce labor costs and shorten the construction period. This study is to compare and verify the performance according to the location where the brackets are joined to the joints using the non-welded building hardware method

In recent years, non-welded building hardware that can be installed by bolt assembly is used, which does not require fire prevention related materials, fire fighting equipment and personnel. However, there is a need for a method to compensate for the occurrence of buckling at the bolted portion at the time of construction.The purpose of this study is to evaluate the behavior of joints that can control the sliding between members by using anti slip brackets.

When attaching the building exterior, builder used welded-building hardware in general. But it caused variety accidents like fires and explosions. Thus in this study, we developed the building hardware that not use welding and can follow the structures horizontal displacement when an earthquake occurs in the load building. And shaking table test was conducted.

Steel pipe pile, which is used for the base of structures, need the reinforcing head method to prove enough dynamic performance. Currently there are various reinforcing head methods are used, but most of them have problems of structural complications and heavy charges. Thus, this study is to develop a reinforcing head method for steel pipe piles using hook type bending reinforcement, which can fix piles using nuts, and experimentally prove structural performances.

조적조 건축물은 국내 소규모 주택의 많은 부분을 차지하지만 취성적 거동 및 낮은 연성능력으로 현재에는 사용빈도가 많이 낮아졌다. 그럼에도 불구하고 조적조 건축물의 낮은 건축비, 재료의 친환경성은 국외를 중심으로 새롭게 각광 받으면서 구조적 단점을 해결하고자 많 은 연구가 진행 중이다. 본 연구에서는 조적벽체 및 교차부 실험체를 제작하여 신축줄눈 유⋅무에 따른 구조적 거동의 차이를 확인하고, 연결철물 (스틸플레이트, 스테인리스 트위스트바) 삽입에 따른 보강효과를 검증하였다. 실험결과를 통해 스틸플레이트를 삽입한 실험체는 내력이 증가되어 실험체의 강성이 향상되었으며, 스테인리스 트위스트바를 삽입한 실험체는 연성능력이 향상되어 취성파괴가 발생하지 않 아, 연결철물 삽입에 따른 보강효과는 우수한 것으로 나타났다.

In cases of wooden structure and wooden house installed on the outside, metal goods used for basic connection are usually screw bolts, strainless nails and general iron nails. As metal connections on wood are directly exposed to exterior environment, friction resistibility of nails on metal connections declines and continual defects on this are generated and maintenance for it is required. However, experiments and analyses for preparing basic data for improvement of the problems have been not conducted so far and wooden structures with defects are abandoned. Accordingly, by analyzing friction resistibility of connections by each kind of woods and metal goods, the study aims to suggest to use metal goods appropriately by kinds of woods and manufacture conditions with analysis on characteristics of resistibility of extracting nails for solving such problems and to secure basic data for establishing maintenance, repair and reinforcement plans.

In this study, experimental research was carried out to evaluate the structural performance of the reinforced concrete beam retrofitted by strengthening methods(embedded FRP rod of hexagon, metal fittings) in existing reinforced concrete buildings. Test results showed that the maximum load carrying capacity of retrofitted specimens(BCR, BCR-AC1, BCR-AC2) were increased by 55%, 47%, and 52% respectively in comparison with the standard specimen BSS.

전통 목구조는 기둥-보-도리로 가구를 구성하며, 보 장부의 파괴는 전통 목구조의 붕괴로 이어질 수 있다. 장부의 구조성능을 평가하기 위해 장부 두께에 따른 내력과 강성을 평가하고, 상부 구조체를 해체하여야 가능한 기존 보강방안을 보완하여 상부 구조체를 해체하지 않고 보강하는 방안을 제안한다. 효과적인 보강방안을 제안하기 위해 철물 개수 및 간격, 모양 및 삽입깊이를 요인으로 실험을 행하여 비보강 실험체와 내력, 강성을 비교한다. 장부의 전단실험을 통하여 다음과 같은 결론을 도출한다. 장부의 내력과 초기전단강성은 장부 두께가 두꺼워질수록 증가하지만, 장부 두께를 크게 하면 기둥의 사개부분이 약해져 구조적 안전성에 영향을 미친다. 장부의 내력 전단응력 전단강성을 효과적으로 향상시키기 위해서는 철물 3개를 장부의 중앙부에 배치하여 보강하여야 한다. 이를 토대로 기둥-보-도리 등의 접합부에 대한 연구도 진행되어야 할 것이다.

본 연구는 조적조 치장벽체의 신축과 보강공사에 사용될 수 있는 나선형 긴결철물을 사용하여 내부벽체와 긴결된 치장벽체의 전단거동실험을 행하여 이 벽체의 구조적 성능을 검증하고 적절한 시공간격⋅형태 등을 제안하기 위한 실험연구이다. 본 연구를 통해 벽체의 Rocking거동에 있어서는 나선형 긴결철물을 사용한 벽체가 기존 시공법의 벽체보다 동일 간격에서는 우수한 전단저항능력을 나타내며, 간격이 30%정도 증가하여도 유사한 능력을 발휘한다. 짧은 간격에서의 긴결도는 기존 시공법보다 상당히 높음으로 고층건물의 치장벽체로 연와조 조적체의 적용가능성을 높일 수 있을 것으로 판단된다.