We investigate the microstructural and magnetic property changes of DyH2, Cu + DyH2, and Al + DyH2 diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusiontreated magnets increases with increasing heat treatment temperature except at 910oC, where it decreases slightly. Moreover, at 880oC, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed DyH2-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only DyH2. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of 790-880oC. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed DyH2, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic (Nd, Dy)2Fe14B phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

Odor emission effects of unit processes in 10 livestock farms and 3 manure treatment facilities in Y and I cities, Kyonggido, were simulated using puff model after the odor emission rates were measured. 2 degree level of odor intensity and 1 degree level of it were predicted by the puff model in the adjacent area of odor emission source and within the 8km radius range of it, respectively. As real time odor modelling system was operated at specific manure based fertilizer making facility located in Y city, the highest odor concentration was predicted at the entrance of that facility and relatively lower odor intensity was estimated at the place more or less be aparted from the emission sources. The higher odor intensity was evaluated at dawn and evening because the odor was accumulated in case of stable air condition.

A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.

Cu와 Si사이의 확산방지막으로 1000Å 두께의 TiN의 특성에 대하여 면저항 측정, 식각패임자국 관찰, X선 회절, AES, TEM 등을 이용하여 조사하였다. TiN 확산방지막은 550˚C, 1시간의 열처리 후에 Cu의 안쪽 확산으로 인해 Si(111)면을 따라 결정결함(전위)을 형성하고, 전위 주위에 Cu 실리사이드로 보이는 석출물들을 형성함으로써 파괴되었다. Al의 경우와는 달리 Si 패임자국이 형성되지 안흔 것으로부터 TiN확산방지막의 파괴는 Cu의 안쪽 확산에 의해서만 일어나는 것을 알 수 있었다. 또한, Al의 경우에는 우수한 확산방지막 특성을 보여주었던 충진처리된 TiN가 Cu의 경우에는 거의 효과가 없는 것을 알 수 있었다. 이것은 Al의 경우에는 TiN의 결정립계에 존재하는 TiO2가 Al과 반응하여 Al2O3를 형성함으로써 Al의 확산을 방해하는 화학적 효과가 매우 크지만, Cu의 경우에는 CuO 또는 Cu2O와 같은 Cu 산화물은TiO2에 비해서 열역학적으로 불안정하기 때문에 이러한 화학적 효과를 기대할 수 없으며, 따라서 충진처리 효과가 거의 없는 것으로 이해된다.

Al과 Si사이에서 Ti의 충진처리가 확산방지막 성능에 미치는 영향에 대해서 조사하였다. TiN의 충진처리는 450˚C의 N2 분위기에서 30분간 열처리함으로써 행하였다. TEM 분석을 통해 갓 증착된 TiN의 결정립 사이에는 약 10-20Å 정도의 고체물질이 없거나 TiN에 비해 밀도가 매우 낮은 공간이 존재함을 알 수 있었다. 또한 충진처리된 TiN의 경우에는 이러한 공간의 폭이 10Å 이하로 줄어듦을 알 수 있었다. RBS와 AES 분석에 의해 갓 증착된 TiN는 dir 7at.% 정도의 산소를 함유하고 있었고, 충진처리된 TiN는 약 10-15at.%의 산소를 함유하고 있었다. 갓 증착된 TiN와 충진처리된 TiN를 확산방지막으로 시험한 결과, 갓 증착된 TiN는 650˚C, 1시간의 열처리 후에 Al 스파이크와 Si 패임자국의 형성으로 이해 파괴되었다. 하지만 충진처리된 TiN의 경우에는 같은 열처리 조건에서 Al 스파이크나 Si 패임자국을 전혀 찾아볼수 없었다. 따라서, TiN의 충진처리가 Al과 Si사이에서 확산 방지막 성능을 크게 향상시켜주는 효과가 있음을 알 수 있었다. 이와 같은 충진처리 효과는 TiN의 결정립계의 간격이 줄어듦에 의해서 빠른 확산 경로인 결정립계를 통한 확산이 감소하는 것에 기인하는 것으로 이해된다.

The covered stream of cities are considered an odor source. Also, the public do not want a wastewater treatment plant(WWTP) near their properties due to the emission of odor emanating from such sources, although they play an important role in urban development. The purpose of this study is to analyze the pattern distribution of the odorous compounds from the Nambu WWTP and Youngho stream in Busan. odor sampled four times were analyzed by instrumental analysis method and indirect olfactory method. The kinds of offensive odorous compounds examined are acetaldehyde, propion aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide and ammonia. Also, Concentration of air pollutants has been calculated by ISCST3 models. At the result of this study, The Nambu WWTP releases sulfur compounds. And the major odorous were hydrogen sulfide (1,475 ppb) and acetaldehyde (95 ppb) at Youngho stream. The stink which residents feel will point out the Nambu WWTP mainly if the odor is removed with the improvement of a Youngho stream. Accordingly, we should pay more attention to appropriate components to processes in odor reducing plan at Nambu WWTP.

마다가스카르산 사파이어를 수평 알루미나 튜브의 전기로에서 대기중의 산화분위기 하에 1650℃, 50시간의 조건으로 Be2+의 확산 처리를 하였다. 자외선-가시광선 분광분석 결과는 각 시료 마다 차이는 있으나 전체적으로 Fe2+에서 Fe3+로 산화의 원인으로 청색이 옅어졌고 청자색 사파이어는 Cr3+에 의한 분홍색이 나타났다. Be2+의 확산 처리로 부분적인 갈색이 나타난 청색 사파이어에서는 진한 주황색 부분이 나타났고, 옥화메틸렌에 의한 침적실험 관찰 결과로 시료들의 가장자리에 주황색의 집중현상이 나타났음을 확인하였다. 또한 기존에 있던 내포물도 변화가 나타났다. 그러나 확산 처리 온도의 한계로 더 많은 양의 Be2+의 확산이 이루어 지지는 못했다.

A digital image processing technique which is able to be used for getting the velocity vector distribution of a surface of the spilt oil in the ocean without contacting the flow itself. This technique is based upon the PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a high sensitive camera, a CCD camera, an image grabber, and a host computer in which an image processing algorithm is adopted for velocity vector acquisition. For the acquisition of the advective velocity vector of floating matters on the ocean, a new multi-frame tracking algorithm is proposed, and for the acquisition of the diffusion velocity vector distribution of the spilt oil onto the water surface, a high sensitive gray-level cross-correlation algorithm is proposed.

A digital image processing technique which is able to be used for getting the velocity vector distribution of a surface of the spilt oil in the ocean without contacting the flow itself. This technique is based upon the PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a high sensitive camera, a CCD camera, an image grabber, and a host computer in which an image processing algorithm is adopted for velocity vector acquisition. For the acquisition of the advective velocity vector of floating matters on the ocean, a new multi-frame tracking algorithm is proposed, and for the acquisition of the diffusion velocity vector distribution of the spilt oil onto the water surface, a high sensitive gray-level cross-correlation algorithm is proposed.