A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at 7.0 g/cm3 and then sintered in H2-N2 at 1120℃. The P around the macropores and large grains reduces due to the formation of SiO2 as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.

Recently, various attempts to produce a heat sink made of Al 6xxx alloys have been carried out using die-casting. In order to apply die-casting, the Al alloys should be verified for die-soldering ability with die steel. It is generally well known that both Fe and Mn contents have effects on decreasing die soldering, especially with aluminum alloys containing substantial amounts of Si. However, die soldering has not been widely studied for the low Si aluminum (1.0~2.0wt%) alloys. Therefore, in this study, an investigation was performed to consider how the soldering phenomena were affected by Fe and Mn contents in low Si aluminum alloys. Each aluminum alloy was melted and held at 680˚C. Then, STD61 substrate was dipped for 2 hr in the melt. The specimens, which were air cooled, were observed using a scanning electron microscope and were line analyzed by an electron probe micro analyzer. The SEM results of the dipping soldering test showed an Al-Fe inter-metallic layer in the microstructure. With increasing Fe content up to 0.35%, the Al-Fe inter-metallic layer became thicker. In Al-1.0%Si alloy, the additional content of Mn also increased the thickness of the inter-metallic layer compared to that in the alloy without Mn. In addition, EPMA analysis showed that Al-Fe inter-metallic compounds such as Al2Fe, Al3Fe, and Al5Fe2 formed in the die soldering layers.

A study was conducted to determine the effects of the cattle manure (CM) application on the botanical composition and micro-mineral contents (Fe, Mn, Cu, Zn) of grazing pasture at the experimental field of Livestock Division, Subtropical Animal Experiment Station, National Institute of Animal Science from year 2003 to 2005. The experiment was arranged in a randomized complete block design with three replications. The treatment consisted of T1: 100% chemical fertilizer (CF 100%), T2: 50% CF +50% CM, T3: 25% CF +75% CM, T4: 100% cattle manure (CM 100%), T5: 100% CM (1st yr.)+ 100% CF (2nd yr.) + 100% CM (3rd yr.), T6: 100% CM (1st yr.)+ 100% CF (2nd yr.)+ 100% CF (3rd yr.). The botanical composition of grassland for grass, legumes, and weeds showed that the rate of legumes was increased in all treatments. The weeds rate in T4 was the highest in comparison to the other treatments. For micro-mineral contents T5 showed the highest average Fe contents of 262.08 ppm and T1 showed the lowest (199.20 ppm). Mn contents was the highest in T1 among the other treatments. Zn contents was the highest in T3 as compared with other treatments. Cu contents was the highest in T6 as compared with other treatments. The results of this experiments indicated that micro-mineral contents of change was effect of legumes increased than treatment

미량요소 Fe, Mn, Cu 및 Zn의 systematic variation 시비가 orchardgrass 및 white clover의 생육, 개화, 수량, 양분 함량 등에 미치는 영향 등을 구명하였다. 다량요소 양분을 동일량 시비한 조건에서 Fe/Cu(시험군-1), Mn/Zn(시험군-2) 및 Fe+Cu/Mn+Zn(시험군-3) 시험에서는 각 시험군 처리별 총 시비량을 systematic variation 방법으로 0/100, 25/75, 50/50, 7

Orchardgrass 및 white clover에서 미량요소 Fe, Mn, Cu 및 Zn의 systematic variation 시비가 목초의 생육, 개화, 수량, 양분 함량 등에 미치는 영향 등을 구명하였다. 다량요소 양분을 동일량 시비한 조건에서 Fe/Cu(시험군-1), Mn/ Zn(시험군-2) 및 Fe+Cu/Mn+Zn(시험군-3) 시험에서는 systematic variation 방법으로 각 시험군 처리별 총 시비량을 0/100, 25/75, 50

Orchardgrass 및 white clover에서 미량요소 Fe, Mn, Cu 및 Zn의 systematic variation 시비가 목초의 생육, 개화, 수량 및, 양분 함량 등에 미치는 영향 등을 구명하였다. 다량요소 양분을 동일 양 시비한 조건에서 Fe/Cu(시험군-1), Mn/Zn(시험군-2) 및 Fe+Cu/Mn+Zn(시험군-3)의 처리는 systematic variation 방법으로 시험군별 총 시비량을 각각 0/100, 25/75, 50/

Orchardgrass 및 white clover의 단파 및 혼파 재배조건에서 미량요소 Fe, Mn, Cu, Zn, Mo및 B의 조합시비가 목초의 생육, 개화, 수량, 양분 함량 및 식생구성비율 등에 미치는 영향을 구명하였다. 다량요소 양분을 동일 량 시비한 조건에서 7 수준의 미량요소 조합시비는 ;대구조, ; Fe, ; Fe＋Mn, : Fe＋Mn＋Cu, ; Fe＋Mn＋Cu＋Zn, ; Fe＋Mn＋Cu＋Zn＋Mo 및 ;Fe＋Mn＋Cu＋Zn＋Mo＋B로 하였

Orchardgrass 및 white clover의 단파 및 혼파 재배조건에서 미량요소 Fe, Mn, Cu, Zn, Mo및 B의 조합시비가 목초의 생육, 개화, 수량, 양분 함량 및 식생구성비율 등에 미치는 영향을 구명하였다. 다량요소 양분을 동일 량 시비한 조건에서 7 수준의 미량요소 조합시비는 ; 대조구, ; Fe, ; Fe+Mn, ; Fe+Mn＋Cu, ; Fe＋Mn＋Cu＋Zn, ; Fe＋Mn＋Cu＋Zn＋Mo 및 ; Fe＋Mn＋Cu＋Zn＋Mo＋B로

orchardgrass 및 white clover의 단파 및 혼파재배에서 미량요소 붕소(B)의 시비수준별 목초의 생육상, 뿌리/근류 형성, 수량성, 양분의 함량 및 초종간 경합지수 등에 미치는 영향 등을 구명하였다. 처리내용은 다량 및 미량요소 시비를 동일하게 한 조건에서 5 수준의 붕소 처리: 1) ; 0.0, 2) ; 0.2, 3) ; 2.0. 4) ; 6.0, 5) ; 15.0me B/pot로 glasshouse에서 pot시험으로 수행하였다. I보