Metal additive manufacturing (AM) has transformed conventional manufacturing processes by offering unprecedented opportunities for design innovation, reduced lead times, and cost-effective production. Aluminum alloy, a material used in metal 3D printing, is a representative lightweight structural material known for its high specific strength and corrosion resistance. Consequently, there is an increasing demand for 3D printed aluminum alloy components across industries, including aerospace, transportation, and consumer goods. To meet this demand, research on alloys and process conditions that satisfy the specific requirement of each industry is necessary. However, 3D printing processes exhibit different behaviors of alloy elements owing to rapid thermal dynamics, making it challenging to predict the microstructure and properties. In this study, we gathered published data on the relationship between alloy composition, processing conditions, and properties. Furthermore, we conducted a sensitivity analysis on the effects of the process variables on the density and hardness of aluminum alloys used in additive manufacturing.

Environmental DNA (eDNA) can exist in both intracellular and extracellular forms in natural ecosystems. When targeting harmful cyanobacteria, extracellular eDNA indicates the presence of traces of cyanobacteria, while intracellular eDNA indicates the potential for cyanobacteria to occur. However, identifying the “actual” potential for harmful cyanobacteria to occur is difficult using the existing sediment eDNA analysis method, which uses silica beads and cannot distinguish between these two forms of eDNA. This study analyzes the applicability of a density gradient centrifugation method (Ludox method) that can selectively analyze intracellular eDNA in sediment to overcome the limitations of conventional sediment eDNA analysis. PCR was used to amplify the extracted eDNA based on the two different methods, and the relative amount of gene amplification was compared using electrophoresis and Image J application. While the conventional bead beating method uses sediment as it is to extract eDNA, it is unknown whether the mic gene amplified from eDNA exists in the cyanobacterial cell or only outside of the cell. However, since the Ludox method concentrates the intracellular eDNA of the sediment through filtration and density gradient, only the mic gene present in the cyanobacteria cells could be amplified. Furthermore, the bead beating method can analyze up to 1 g of sediment at a time, whereas the Ludox method can analyze 5 g to 30 g at a time. This gram of sediments makes it possible to search for even a small amount of mic gene that cannot be searched by conventional bead beating method. In this study, the Ludox method secured sufficient intracellular gene concentration and clearly distinguished intracellular and extracellular eDNA, enabling more accurate and detailed potential analysis. By using the Ludox method for environmental RNA expression and next-generation sequencing (NGS) of harmful cyanobacteria in the sediment, it will be possible to analyze the potential more realistically.

Pine wilt disease caused by Bursaphelechus xylophilus has continued to expanding in Korea since its first occurrence identified from Busan in 1988. The direction of spread and density of two vector insects, Monochamus saltuarius and M. alternatus, are closely associated with the expansion and occurrence of pine wilt disease being observed in Korea. In 2016, a pheromone trap was installed to investigate the density of each vector. A correlation between the density of two insect vectors and the number of trees infected by pine wilt disease was further investigated in Gyeongnam, Gyeongbuk, Ulsan, and Jeju. To perform a correlation analysis, the number of infected trees was counted within a radius of 50m from which the pheromone traps were installed. In addition, factors that might have an effect on the density of vectors were investigated. This includes the altitude, temperature and forest type from the site where the pheromone traps were installed.

어떤 해역의 해상교통혼잡도를 평가하는 데 있어서 단위 시간당 항행 척수인 교통량을 분석하는 것보다 어떤 시간 단면에 존재하는 단위 면적당의 밀집도 분석을 활용하는 것이 합리적일 수 있다. 본 연구에서는 해상교통안전진단 대행기관의 해상교통혼잡도 평가기법을 표준화하고, 선박톤급별 환산교통량 사용으로 인한 평가오차를 최소화하기 위하여 새로운 방안을 찾고자 한다. 이를 해결하기 위해 선박자동식별장치(Automatic Identification System, AIS)의 통항선박 데이터를 활용하여 항로구간면적 대비 식별된 개개의 통항선박이 갖고 있는 점용영역의 면적을 합산한 값과의 백분율을 해상교통혼잡도로 평가하는 방안을 제시하였다. 새로운 모형에서는 정보통신기술의 획기적인 발달로 인해 실제 데이터 사용이 가능하여 환산 데이터에 의한 오차발생을 줄일 수 있고, 항로구간별 해상교통혼잡도 평가도 가능하게 되었다.

본 연구는 서해안에서 상선의 어구 손괴로 인한 추진기 장애를 예방하기 위해 연안자망어선의 월별분포를 제시하였다. 분석 방법은 2014년 1년간의 어선위치발신장치 데이터를 이용하였다. 조업 해구도를 기준으로 경·위도 30′× 30′크기의 해구별 간격으로 격자를 설정하였다. 총 56개 해구를 대상으로 격자를 구성하였다. 연구 결과 밀도지수가 가장 높았던 194해구는 어구 손괴가 없었다. 반면, 밀도지수가 상대적으로 작은 193해구는 상선의 주 통항경로에 어구가 설치되기 때문에 손괴가 발생했다. 이 분석을 바탕으로 어구 손괴는 밀도지수에 비례하지 않고 상선의 주 통항경로에 따라 손괴위험이 존재하는 것으로 나타났다. 따라서 상선의 안전항해를 위해 5월부터 9월까지 위도 34.5° ~ 35.5°, 경도 125.67° ~ 126°를 항행경보구역으로 통보하면 추진기 장애와 어구손괴와 같은 해양사고를 예방할 것이다. 따라서 상선이 193해구와 203해구를 항해할 때는 안전한 항해를 위해 위도 34.5° ~ 35.5°, 경도 125.5° ~ 125.67°을 추천한다.

PURPOSES: This study deals with the traffic accidents classified by the traffic analysis zone. The purpose is to develop the accident density models by using zonal traffic and socioeconomic data. METHODS : The traffic accident density models are developed through multiple linear regression analysis. In this study, three multiple linear models were developed. The dependent variable was traffic accident density, which is a measure of the relative distribution of traffic accidents. The independent variables were various traffic and socioeconomic variables. CONCLUSIONS : Three traffic accident density models were developed, and all models were statistically significant. Road length, trip production volume, intersections, van ratio, and number of vehicles per person in the transportation-based model were analyzed to be positive to the accident. Residential and commercial area ratio and transportation vulnerability ratio obtained using the socioeconomic-based model were found to affect the accident. The major arterial road ratio, trip production volume, intersection, van ratio, commercial ratio, and number of companies in the integrated model were also found to be related to the accident.

In recent years, technology has been developed the way the volume of the portable communication device is reduced but its performance is maintained. The COF(Chip On Film) packaging method is used due to the densification of the lead pitch, especially for the display driver IC. During COF packaging, lead break and film detachment could occur by the high bonding temperature and pressure, and possibility for lead interference can emerge by deformation of leads. In this study, a new double-column arrangement of leads is considered to increase lead density further than the existing zigzag arrangement of leads, and nonlinear structural analysis was carried out to examine whether the interference can occur. The results showed that stress and deformation of the corner region appear relatively higher than those of central region, and interference did not occur by the lead strain for the double-column arrangement of leads with pitch of 25μm. Therefore, double-column lead arrangement can improve lead density by about 176% compared to the zigzag lead arrangement

PURPOSES : This study presents a specific methodology for air dispersion analysis of urban areas methodology in accordance with urban planning and transport policy. METHODS: This study performed three alternatives including development density and public transit applying integrated urban model for the Delft city on Netherlands. Based on this result, the two types of air pollutant emissions(PM10, NOx) were calculated and analyzed the emission dispersion on that City. RESULTS: As a result, the quality of air near the City is better than that of current conditions showed that approximately from 2.1 to 7.9% according to alternatives. CONCLUSIONS: Air quality assessment in urban areas can be reasonably performed by applying a methodology when urban development and transport policy are considered.

본 연구는 강원도 원주시 도심지역인 행정동에 조성된 전체 공원과 녹지를 대상으로 식재 수종 및 식재밀도 특성을 분석하였다. 원주시 행정동지역 공원과 녹지에는 교목 침엽수 19종 8,050주, 활엽수 61종 6,037주, 관목 103종 77,609주가 식재되어 있었다. 근린공원, 어린이공원, 완충녹지, 경관녹지 4개 유형 모두 조성시기, 주변 토지이용 요인과 상관없이 침엽수인 스트로브잣나무의 수종 편중이 심하였고, 잣나무, 벚나무, 단풍나무, 느티나무, 소나무 순으로 식재 되어 있었다. 공원과 녹지의 평균 식재밀도는 교목 0.03주/㎡, 관목 0.18주/㎡로 대부분의 대상지는 식재밀도가 낮았고 관목식재가 미흡하였다. 녹지공간 내 잔디식재지가 넓어 식재밀도 증진과 관목류 보식이 필요하였다. 따라서 공원녹지내 추가로 식재할 수 있는 공간을 구분하여 미식재지역 내 수목 보식, 다층구조 식재, 관목 식재 등 식재밀도 증진을 제안하였다.

The SMC(Sheet molding compound) process is widely used in the automotive industry to produce parts that are large, thin, lightweight, strong and stiff. Compression molded parts are formed by squeezing a glass fiber reinforced UP(Unsaturated Polyester) sheet, known as sheet mold compound(SMC), between two heated cavity surfaces. This paper has performed flow analysis to predict optimization process of low density SMC. After five types of design variables and six types of response variables were defined, DOE(Design of Experiment) and RSM (Response Surface Method) were applied in order to measure sensitivity of design variables and realize optimization through regression model. After design optimization, the total warpage of the SMC is reduced by about 12% compared to the initial design of SMC and cure time, cure temperature, clamping force and flow pressure are decreased by 0.6∼27% in comparison with the initial design. By doing this, the production costs could be diminished.

본 연구는 두루미(Grus japonensis)의 이용분포 내에서 행동권 분석의 기법인 MCP(최소볼록다각형법), KDE(커널밀도측정법), LoCoH(국지근린지점외곽연결)를 이용하여 이용면적과 핵심서식지를 선정하였다. 또한, 각 기법의 차이와 의미를 고찰하도록 하였다. 두루미의 분포자료는 철원지역 2012년 2월 17일 조사자료를 사용하였다. MCP에 의한 두루미류 서식영역은 140km2이었다. KDE 분석에서 띠폭에 해당하는 h값을 1000m, CVh, LSCVh로 달리하여 KDE 등치선을 생성하였을 때, 핵심지역에 해당하는(Kernel 50% 이상) 면적은 33.3km2(KDE1000m), 25.7km2(KDECVh), 19.7km2(KDELSCVh)이었다. 결과적으로 띠폭에 대한 기본값(1000m)-CVh(554.6m)-LSCVh(329.9m) 순으로 변수를 작게 입력할 경우 핵심면적 개수는 늘어나고, 면적은 감소하였으며, 형태의 복잡성은 증가하였다. 두루미류의 KDE 분석에 의한 핵심지역의 선정에서 적합한 띠폭변수는 CVh 값인 것으로 판단되었다. LoCoH분석에서는 서식범위와 핵심지역(50% 등치선 이상의 지역)의 면적이 k값의 증가에 따라 증가하는 모습을 보였으며, 점차 큰 핵심지역으로 합쳐지는 모습을 나타내었다. 핵심지역을 도출하기에 적합한 k 값은 24로 나타났으며, 전체 개체군의 핵심지역은 18.2km2로 전체 서식면적의 16.5%를 차지하였다. 최종적으로, LoCoH 분석은 두 개의 큰 핵심서식지를 제시하였으며, 이것은 KDE에 의한 핵심지역에 비하여 작은 수의 핵심지역을 제시한 것이었다. 국내의 게재논문 및 발표자료를 포함한 연구에서 KDE는 대부분 기본설정으로 분석되었으며, 띠폭에 의한 변수를 고려한 것은 매우 드물었다. 따라서 띠폭변수를 명확히 제시하는 것이 요구되었다.

The purpose of this study is to examine the changes in bone mineral density in long-stay patients of a geriatric hospital in relation to physical therapy, thereby providing basic data for preventing the onset or deterioration of osteoporosis in inpatients of geriatric hospitals or relevant facilities. The subjects of this study were 133 elderly patients who had been in H geriatric hospital in Yongin-si for more than four years. Their bone mineral density T-scores at admission and those after four years were measured to compare and analyze the changes in bone mineral density in relation to physical therapy. According to the results, the decrease in T-score for the group without physical therapy was greater by .40 than that for the group with physical therapy, indicating a statistically significant difference between the two groups(p<.01). Accordingly, physical therapy proved to be effective in preventing bone mineral density loss and maintaining the current density.