To enhance mechanical properties through improvement of dispersion stability of carbon black (CB) in epoxy resins, fluorine functional groups were introduced on the CB surface by fluorination. The changes in the chemical properties and dispersion stabilities after fluorination were evaluated with different partial pressures of fluorine gas. The mechanical properties of the fluorinated CB/epoxy composites were evaluated by the test of tensile, impact strengths and creep behavior. The fluorinated CB/epoxy composites showed approximately 1.6 and 1.1 times enhancement in the tensile and impact strengths compared to that of neat epoxy, respectively. Moreover, when a constant load was applied at 323 K, the fluorinated CB/epoxy composites lasted longer and had smaller strain changes than those of the raw CB/epoxy composites. Thus, well-dispersed CB by fluorination in epoxy resins effectively transfers mechanical stress.

Ni-based oxide dispersion strengthened (ODS) alloys have a higher usable temperature and better hightemperature mechanical properties than conventional superalloys. They are therefore being explored for applications in various fields such as those of aerospace and gas turbines. In general, ODS alloys are manufactured from alloy powders by mechanical alloying of element powders. However, our research team produces alloy powders in which the Ni5Y intermetallic phase is formed by an atomizing process. In this study, mechanical alloying was performed using a planetary mill to analyze the milling behavior of Ni-based oxide dispersions strengthened alloy powder in which the Ni5Y is the intermetallic phase. As the milling time increased, the Ni5Y intermetallic phase was refined. These results are confirmed by SEM and EPMA analysis on microstructure. In addition, it is confirmed that as the milling increased, the mechanical properties of Ni-based ODS alloy powder improve due to grain refinement by plastic deformation.

해상으로 운송되는 위험유해물질 (HNS, Hazardous and Noxious Substance)은 6,000여종 이상으로 많은 종류를 포함하고 있으므로, 유출시 대응전략 수립을 위한 HNS 거동 및 위험반경 예측을 결정론적으로 제시하기 어렵다. HNS 거동예측에서는 예측의 신속성과 효율성을 고려하여 차이가 미미한 모든 종류의 HNS 특성을 모두 고려하는 대신에 거동에 크게 영향을 미칠 수 있는 특성들에 초점을 맞쳐 대표적인 거동예측 모델을 개발하여 적용할 필요가 있다. 본 연구에서는 HNS를 기체상, 액체상, 고체상 등 크게 3분류로 구분하고, 각각의 분류별 거동특성 모델링을 연구하였다. 물질 특성별 거동특성은 증기압, 용해도, 밀도 등을 고려하였으며, 각각의 변수에 따른 증발, 혼홥, 침강 등의 거동을 모델링하였다. 물질의 거동특성 모델링은 대기 해양 확산모델의 계산에서 대기중 확산, 수중 확산, 해저면 침적 등을 결정하는 과정으로 활용된다.

Synthesized monocrystalline nanodiamond (nD) particles are heat-treated at various temperatures to produce highly structured diamond crystals. The heat-treated nDs show different weight loss ratios during thermogravimetric analysis. The crystallinities of the heat-treated nDs are analyzed using Raman spectroscopy. The average particle sizes of the heat-treated nDs are measured by a dynamic light scattering (DLS) system and direct imaging observation methods. Moreover, individual dispersion behaviors of the heat-treated nD particles are investigated based on ultrasonic dispersion methods. The average particle sizes of the dispersed nDs according to the two different measurement methods show very similar size distributions. Thus, it is possible to produce highly crystallized nD powder particles by a heattreatment process, and the nD particles are relatively easy to disperse individually without any dispersant. The heattreated nDs can lead to potential applications such as in nanocomposites, quantum dots, and biomedical materials.

This study investigates the oxidation properties of Fe-14Cr ferritic oxide-dispersion-strengthened (ODS) steel at various high temperatures (900, 1000, and 1100°C for 24 h). The initial microstructure shows that no clear structural change occurs even under high-temperature heat treatment, and the average measured grain size is 0.4 and 1.1 μm for the as-fabricated and heat-treated specimens, respectively. Y–Ti–O nanoclusters 10–50 nm in size are observed. High-temperature oxidation results show that the weight increases by 0.27 and 0.29 mg/cm2 for the asfabricated and heat-treated (900°C) specimens, and by 0.47 and 0.50 mg/cm2 for the as-fabricated and heat-treated (1000°C) specimens, respectively. Further, after 24 h oxidation tests, the weight increases by 56.50 and 100.60 mg/cm2 for the as-fabricated and heat-treated (1100°C) specimens, respectively; the latter increase is approximately 100 times higher than that at 1000°C. Observation of the surface after the oxidation test shows that Cr2O3 is the main oxide on a specimen tested at 1000°C, whereas Fe2O3 and Fe3O4 phases also form on a specimen tested at 1100°C, where the weight increases rapidly. The high-temperature oxidation behavior of Fe-14Cr ODS steel is confirmed to be dominated by changes in the Cr2O3 layer and generation of Fe-based oxides through evaporation.

Alumina dispersion strengthening copper(ADSC) alloy has great potential for use in many industrial applications such as contact supports, frictional break parts, electrode materials for lead wires, and spot welding with relatively high strength and good conductivity. In this study, we investigated the oxidation behavior of ADSC alloys. These alloys were fabricated in forms of plate and round type samples by surface oxidation reaction using Cu-0.8Al, Cu-0.4Al-0.4Ti, and Cu-0.6Al-0.4Ti(wt%) alloys. The alloys were oxidized at 980 oC for 1 h, 2 h, and 4 h in ambient atmosphere. The microstructure was observed with an optical microscope(OM) and a scanning electron microscope(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS). Characterization of alumina was carried out using a 200 kV field-emission transmission electron microscope(TEM). As a result, various oxides including Ti were formed in the oxidation layer, in addition to γ-alumina. The thickness of the oxidation layer increased with Ti addition to the Cu-Al alloy and with the oxidation time. The corrected diffusion equation for the plate and round type samples showed different oxidation layer thickness under the same conditions. Diffusion length of the round type specimen had a value higher than that of its plate counterpart because the oxygen concentration per unit area of the round type specimen was higher than that of the plate type specimen at the same diffusiondepth.

In this work, the dispersion behavior of particles in binary aluminum (Al)-copper (Cu) cast alloy was investigated with respect to Cu contents of 20 (hypoeutertic), 33 (eutectic) and 40 (hypereutectic) wt.%. In cases of hypo and hypereutectic compositions, SEM images revealed that the primary Al and phases were grown up at the beginning, respectively, and thereafter the eutectic phase was solidified. In addition, it was found that some of particles can be dispersed into the primary Al phase, but none of them are is observed inside the primary 6 phase. This different dispersion behavior of particles is probably due to the difference in the val- ues of specific gravity between particles and primary phases. At eutectic composition, particles were well dispersed in the matrix since there is few primary phases acting as an impediment site for particle dispersion during solidification. Based on the experimental results, it is concluded that particles are mostly dispersed into the eutectic phase in binary Al-Cu alloy system.

Background : Cu ion is an essential mineral of animal feed. But rapid degradation of Cu ion in animal intestine causes poor immune activity and potential environment hazard. Therefore, to enhance immune system and control metal ion deliverly in intestine, we developed Cu ion nano suspension. In animal feed, > 127 ㎎/g of Cu ion are found but only 5 - 7 ㎎ are used out of them. Therefore, huge loss of Cu ion causes environment, economy and animal health problem. Methods and Results : Seven formulation were prepared to prepare nano suspension (particle size < 200 ㎚) of CuSO4. The particle diameter, polydispersity index, and zeta potential values of the samples were measured using dynamic light scattering (DLS) and laser Doppler methods (ELS-Z1000; Otsuka Electronics, Tokyo, Japan). Absorbance and Cu ion concentration was measured using UV-VIS Spectrophotometer. Cu ion nano particle (< 200 ㎚) was found in a formulation comprised of Cu ion : surfactant (lipophilic : hydrophilic) and PEG. In consistence with this result, total absorbance and concentration was found higher in the same formulation compared to control. Conclusion : From our experiment we may conclude that mixture of Cu ion : surfactant (lipophilic : hydrophilic) and PEG successfully prepared nano suspension which slow down the degradation of Cu ion in intestine with improving feed quality, animal health and prevent potential environment pollution.