Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.

To enhance mechanical properties through improvement of dispersion stability of carbon black (CB) in epoxy resins, fluorine functional groups were introduced on the CB surface by fluorination. The changes in the chemical properties and dispersion stabilities after fluorination were evaluated with different partial pressures of fluorine gas. The mechanical properties of the fluorinated CB/epoxy composites were evaluated by the test of tensile, impact strengths and creep behavior. The fluorinated CB/epoxy composites showed approximately 1.6 and 1.1 times enhancement in the tensile and impact strengths compared to that of neat epoxy, respectively. Moreover, when a constant load was applied at 323 K, the fluorinated CB/epoxy composites lasted longer and had smaller strain changes than those of the raw CB/epoxy composites. Thus, well-dispersed CB by fluorination in epoxy resins effectively transfers mechanical stress.

There are two methods for evaluating two or more mutually exclusive projects. One is a total investment approach and the other is an incremental investment approach. The former can rank projects by the criterion of the net present value, but the latter can’t do it. An incremental investment approach is only possible when all pairwise alternatives are compared. Thus an incremental investment approach is superior in ranking them over an incremental investment approach. To do so, a principle of comparison must be established. Comparisons of profitability are reasonable when operating the same amount of investment over the same period of time. One principle is that all projects are invested in the largest of the projects. Another principle is that all projects are invested during the longest project life of the projects. In this paper, even if the principle is followed, it will be shown that the external rate of return fails to rank them. However, the productive rate of return criterion would prove to be able to rank them like the net present value standard, provided that the principle of comparison is kept. In addition, rate of returns can be assessed so that all mutually exclusive projects can be compared at once, such as on the criterion of the net present value. That is, it can be also compared with many other returns, such as the profit rates on financial investments or real investments.

Visible and IR windows require a combination of high optical transparency and superior thermal and mechanical properties. Materials, fabrication and characterization of transparent ceramics for visible/IR windows are discussed in this review. The transparent polycrystalline Y2O3, Y2O3-MgO nanocomposites and MgAl2O4 spinel ceramics are fabricated by advanced ceramic processing and the use of special sintering technologies. Ceramic processing conditions for achieveing fully densified transparent ceramics are strongly dependent on the initial powder characteristics. In addition, appropriate use of sintering technologies, including vacuum sintering, hot-pressing and spark plasama sintering methods, results in outstanding thermal and mechanical properties as well as high optical transparency of the final products. Specifically, the elimination of light scattering factors, including residual pores, second phases and grain boundaries, is a key technique for improving the characteristics of the transparent ceramics. This paper discusses the current research issues related to synthesis methods and sintering processes for yttria-based transparent ceramics and MgAl2O4 spinel.

Multiple starters consisting of two Bacillus amyloliquefaciens strains (MJ1-4 and EMD17), Pichiafarinosa SY80, and Rhizopus oryzae were used for Doenjang making. Bacillus strains were selected based on their abilities to inhibit toxinogenic fungi and Bacillus cereus, fibrinolytic activity, and their ability to confer good flavor to Cheonggukjang. P. farinosa SY80 and R. oryzae, previously isolated from soy sauce, were selected because they were not inhibited by two bacilli. Doenjang was prepared by inoculation of multiple starters (A1 Doenjang). Control Doenjang was prepared by inoculation of B. subtilis KACC 16750 (Natto strain) and Aspergillus oryzae KCCM 60166 (A2 Doenjang). Another control (A3 Doenjang) was prepared by inoculation of microorganisms present in rice straw. Doenjang samples were fermented for 70 days at 20℃. pH of 3 samples decreased from the initial value of 6.4 to 5.8~6.0 and titratable acidity (TA) increased from 0.6 to 1.1~1.3. The amount of amino-type nitrogen increased during fermentation. There were slight differences in moisture, crude-protein, and crude-fat contents after 70 days. Contamination of fungi was observed only in A3 Doenjang and B. cereus was not detected from all 3 samples. A1 Doenjang showed the highest fibrinolytic activity and A2 Doenjang the second. These results indicate that Doenjang made with carefully selected starters was functionally improved and microbially more safe.

The perilla leaf pyralid moth, Pyrausta panopealis Walker (Lepidoptera: Pyralidae), is a serious pest damaging to leaf perilla. In order to establish the life parameters of P. panopealis for eventual purpose of control, the developmental span of each stage were investigated under five temperature regimes (20℃ ~ 3 0℃). In addition, the larvicial efficacy of several on-the-market environment-friendly agricultural materials (EFAMs) was tested. The width of head capsule at each larval stage measured to be the mean of 0.21, 0.32, 0.47, 0.64, and 0.98 mm, respectively. The larval period of P. panopealis was longest at 20ºC as 27.0 days and shortened as temperature goes up to 30ºC as 11.3 days. Survivorship of the larval P. panopealis was the highest at 30ºC as 80%, whereas that of other temperatures ranged from 40% (20ºC) to 62.5% (27.5ºC), indicating that the P. panopealis appears to favor higher temperature. In addition to larval period, the duration of egg, prepupa, and pupa stages also shortened as temperature goes up, whereas the duration of adult stage increased as temperature goes up: from 4.1 days at 20 ºC to 6.1 days at 30ºC. After the perilla leaf pyralid moths were successfully stabilized in indoor environment the larvicidal efficacy of the ten EFAMs that were previously selected from the result of other moth species was tested aimed at 4th instar larvae for 48 hrs. Seven of the ten tested showed more than 90% of mortality within 12 hrs and reached nearly up to 100% within 24 hrs, but the remaining three showed less than ~70%.

We determined the complete mitochondrial genome (mitogenome) of the jewel beetle, Chrysochroa fulgidissima (Coleoptera: Buprestidae) from two overlapping fragments and subsequent sub fragments. The 15,592-bp long C. fulgidissima mitogenome contains gene arrangement and content identical to the most common arrangement found in insects. Most individual C. fulgidissima mitochondrial (mt) genes were well within the range found in the respective genes of other insects. The 875-bp A+T-rich region is shortest among the coleopteran mitogenomes sequenced in their entirety. The region is interesting in that it contains several stem-and-loop structures and tRNA-like structure found in the A+T-rich regions of other insect mitogenomes. As seen in other insect motogenomes the start codon of C. fulgidissima COI gene also is unusual because no typical start codon is available. Three of the 13 protein-coding genes have incomplete termination codon T or TA. All tRNA formed stable stem-and-loop structure, except for tRNASer(AGN), the DHU arm of which formed a simple loop as seen in many other metazoan mt tRNASer(AGN).

Background : Recently, ginseng (Panax ginseng C.A. Meyer.) berry has been used as a health-promoting supplements. Also, Mulberries (Morus alba L.) fruit have been used in traditional herbal medicine to treat and prevent diabetes. In this study, we measured the cytotoxicity after fermentation of the extracts in Panax Ginseng Berry and Mulberry Fruit. Methods and Results : The extracts were prepared by decoction for 3 hours in distilled water (100 g/L). The dried extract was then dissolved in phosphate-buffered saline (PBS) in preparation for use. Cell viability was examined by an MTT assay. RAW 264.7 cells were seeded at 1 × 104/mL densities in 96-well plates. Each grouping had a non-treated group as the control. The extracts were added to each well and incubated for 24 hours at 37°C and 5% CO2. The MTT solutions (5 mg/mL) were added to each well, and the cells were cultured for another 2 hours. The supernatant was then discarded, and 100 μL of dimethyl sulfoxide was added to each well. The optical density was read at 540 nm. Conclusion : Probiotics and prebiotics modulate the composition of human and domestic animal gut microbiota. The beneficial effects may result from suppression of harmful microorganisms or stimulation of organisms which contribute in a positive way to the nutrition and health of human and domestic animal. Recently, fermentation using microorganisms for the production of more effective compounds has been extensively studied. In particular, the novel pharmacological effects of a new compound generated by fermentation have been reported. Some previous studies have demonstrated that Fermented herbal medicine extract showed better bioactivity than normal herbal Plants extract when used at the same concentration.

Cryopreservation has been known as an efficient method for long-term preservation of clonally propagated plants, and several cryopreservation methods have been developed. Among them, a droplet-vitrification method for potato using axillary shoot tips in vitro has been established previously. In this study, we have optimized the procedure in which explants were submitted to a step-wise pre-culture in liquid sucrose-enriched medium (0.3 and 0.7 M for 7 and 17 h, respectively). The pre-cultured explants were dehydrated with PVS3 (w/v, 50% glycerol + 50% sucrose) for 90 min or modified PVS2 vitrification solution (w/v, 37.5% glycerol + 15% DMSO + 15.0% ethylene glycol + 22.5% sucrose) for 30 min. This two dehydration solutions produced post-cryopreservation regeneration percentages of 57.2% and 80.9%, respectively. We also compared a new post-culture medium (0.1 mg L ･ -1 GA3, 0.1 mg L ･ -1 kinetin) with the conventional one (0.15 mg L ･ -1 IAA, 0.2 mg L ･ -1 zeatin, 0.05 mg L ･ -1 GA3); the shooting initiation rates were 80.9% and 43.5%, respectively. The results suggest that the modified droplet-vitrification protocol described in this study is more effective, easier to implement, and more economical than the droplet-vitrification protocols currently used for potato.

A chemical, MNU-induced hulless barley mutant line designated as 'Mutant 98 (M98)' was developed from a Korean hulless waxy barley cultivar, 'Chalssalbori'. The objective of the study was to determine the genetic basis of 'M98' and the possibility of using 'M98' as breeding parent to improve lysine level. Compared to 'Chalssalbori', 'M98' had large embryo and higher lysine content in both the embryo and endosperm. Significantly different lysine content in 'M98' and the other high-lysine barley mutant stocks was observed for two years. However, the genotype by year interaction was not significant. 'M98' was higher than the other high-lysine barley mutant stocks in the percentage of lysine of total amino acid composition (0.75%). The trait of shrunken endosperm of 'M98', which was typical in the high-lysine mutants, was inherited by a single recessive gene. Based on seed morphology and lysine content of F1 seeds, 'M98' had a genetically different gene from the other high-lysine mutants for shrunken endosperm. Segregation of F2 for plump/shrunken endosperm did not fit the expected ratio of Mendelian inheritance except for only one cross combination (GSHO1784 (lys1)/M98). The amino acid analysis of F5 and F6 progenies from the cross between 'M98' and 'Chalssalbori' revealed that the attempt to increase the range of lysine content of plump lines did not go beyond the limit of the average high-lysine barley germplasm.