Solenopsis invicta, known as the red imported fire ant, is an insect native to South America. This species was unintentionally introduced into Australia, New Zealand, several Asian countries, Caribbean countries, and the United States. It shows a high survival rate and settlement potential in human-habitable and non-living areas such as tropical rainforests, disturbed areas, deserts, grasslands, and roads. In Korea, invasions of red fire ants have been reported every year since 2017, and two invasions were discovered in 2023. Quarantine agency analyzing the haplotype and colony social type of S. invicta for surveillance and control. Population genetic analysis using Microsatellite Alleleic data of 66 loci to trace the origin of the invasion. Through research cooperation with the United States Department of Agriculture (USDA), we have received samples and expanded our genetic information database. This study analyzed genetic differences between 15 invasive populations and 44 reference groups. As a result of microsatellite analysis, the domestic invasive population showed a genetic structure similar to those in Guangzhou, China, and Florida, USA.

This study was conducted to obtain basic information for the use of the ATP fluorescence detection method in consideration of the most common and frequent contamination situation that occurs in laboratories dealing with fire blight causing bacterium, Erwinia amylovora. ATP luminescence measurements (Relative Light Unit, RLU) were tested against these pathogen cells (CFU/cm2) which were artificially introduced on the disinfected surface of a bench floor of a biosafety cabinet (Class 2 Type A1), on a part of the disinfected surface of a lab experimental bench, on a part of the disinfected floor, and on a part of the disinfected floor of an acryl chamber for bioaerosol studies in a biosafety laboratory (BSL 2 class) using two different ATP bioluminometers. RLU values were not much increased with the bacterial cells from 2.15 × 102/cm2 to 2.15 × 106/cm2. RLU values varied among the four different surfaces tested. RLU values measured from the same number of bacterial cells differed little between the two different ATP bioluminometers used for this study. RLU values obtained from bacterial cells higher than 2.15 × 107/cm2 indicated the presence of bacterial contamination on the four different surfaces tested. The R2 values obtained based on the correlation data for the RLU values in response to different E. amylovora cell numbers (CFU/ cm2) on the surfaces of the four test spots ranged from 0.9827 to 0.9999.

교량에서의 화재는 최근까지도 빈번하게 발생되고 있으며, 특히 케이블교량에서 화재가 발생될 시 케이블에 높은 온도상승으로 인해 케이블에 손상 및 파단이 발생될 수 있다. 본 연구에서는 케이블교량에서 발생될 수 있는 화재 시나리오를 설정하였다. 또한 실물차량 화재실험 결과를 토대로 화재강도모델을 제안하여 대상교량 케이블의 열전달 해석을 수행하였다. 해석 결과 단면적이 작은 케이블에서 더 높은 온도상승이 발생되며, 유조차를 제외한 차종의 경우 내화 성능 기준을 초과하지 않는 결과를 나타내었다. 유조차 화재의 경우 갓길에서 발생될 때 최소 단면적 케이블에서 내화 성능 기준을 초과하는 결과 를 보이며, 기준을 초과하는 케이블의 높이는 약 14m로 나타나 이에 따른 대책 및 내화 보강의 필요성을 확인하였다. 본 연구결과를 통해 케이블교량에서 화재가 발생될 때 케이블의 온도변화에 대한 간접적인 평가가 가능한 것을 확인하였으며, 향후 화재 발생 시 바람에 영향을 고려한 열전달 해석과 케이블의 온도상승 시 교량의 사용성에 대한 추가적인 연구가 필요할 것으로 판단된다.

PURPOSES: The occurrence of unexpected disasters, including fire events, increases as the road network becomes complicated and traffic volume increases. When a fire event occurs on and under bridges, the damage extensively influences direct damage to structures, vehicles, and human life and secondary socioeconomic issues owing to traffic blockage. This study investigated potential fire-hazard risks on bridges of the Korean national route roadMETHODS: The investigation was conducted using field investigation and analysis with satellite pictures and road views from commercial websites and the Bridge Management System (BMS). From the filed investigation, various potential fire resources were identified. The satellite pictures and road views were helpful in measuring and recognizing conditions underneath bridges, stowage areas, etc.RESULTS : There are various potential fire resources underneath bridges such as piled agricultural products, parked petroleum tanks, construction equipment, and attached high-voltage cables. A total of 94.6% of bridges have underneath clearances of less than 15 m. A bridge underneath volume that can stow a potential fire hazard resource was 7,332 m3 on average, and most bridges have about 4,000 m3 of space. Based on the BMS data, the amounts of PSC and steel girders were 29% and 25%, respectively.CONCLUSIONS : It was found that the amount of stowed potential fire hazard resources was proportional to the underneath space of bridges. Most bridges have less than 15 m of vertical clearance that can be considered as a critical value for a bridge fire. The fire risk investigation results should be helpful for developing bridge fire-protection tools.

This study focused on the review of the korean fire investigation system and will provide the means for having the legal investigation right. The most important thing is to give fire department a perfect legal investigation right on fire including police areas(seeking and examining the case at first stage). And it should be stated in criminal law. With the joint effort between Fire department and Police department, we can develop the reformation, enlightening programs for the arsons or fire related criminals. Through this, it systematically have to be good for fire prevention and can be helpful to enhancing professionalism of fire examination.

This study is to search cooperation plan about fire investigation based on the public-private partnership. Especially focused on the partnership with 4 sector; the academic world, insurance sector, industrial world, professionalist of private fire investigation. In conclusion, Firstly a partnership with the academic world should have courses or school subject extensions related to fire investigation. Secondly, a partnership with insurance sector should secure trust through unifying estimate standard about the origin of damage. Thirdly, A partnership with industrial company is presented making collaboration team to investigate the fire investigation. Lastly, the partnership with the private professionalist related to fire investigation should strengthen credibility and expertise.

Fire scene is mostly destroyed by the flames but fire fighter's fire suppression and rescue activities also destroys a substantail portion. Structures and furnitures which has already become weaken can be easily damaged. Or when structures built up by moving to another location, it's very hard to restore the original state. Also if it is restored, the object has no evidence that it has existed. In all scenes, the scene can't be preserved when quick extinguishment, rescue activities and preventation of fire spread is needed. On this paper, it reviewed the notes about the possibility of field damage by fire suppression and rescue squad's activities. Also it has reviewed the notes how to minimize the field damage by putting out fires and rescue activities by observing the precautions. The reviewed information will help to make guidelines for preserving the scene. By this, it is expected to make a field study exactly by collecting more valid evidence.

The purpose of this study is to distinguish the causes of broken glass on doors or windows when it is originally kept among the remains on the floor in fire site - whether it was broken due to heating or outer power-through test and characteristics of the broken plane including the pattern on the plane. Addition to it, the study tries to find characteristics to judge the point and direction of breakdown through the analysis of glass broken by outer power. With two assumed causes - a) breakdown due to heating and b) breakdown due to outer power-3 pieces of glass plates (30cm×30cm×5mm) were tested for each case, getting the results as following: First, for the glass broken due to the change of temperature, the broken plane is of slow and smooth curve without any pattern. Second, for the glass broken due to outer power, with the impact point as the center, the glass shows breakdown of radial type and the side shows breakdown of near-perpendicular type. The far the broken piece is from the impact point, the bigger the size is. The broken piece at the impact point is of long triangle type and the two long planes of the triangle shows semi-arc with the center of breakdown point and the other plane shows opposite pattern. Third, when glass that is damaged by outer power is heated, damaged forms and side patterns of the glass that is damaged by outer power are heated and disappeared.

The current fire-damage inspection and safety diagnosis has not developed from the labour and time-consuming method. Data collected through traditional safety inspection and survey methods are less quantitative and causes irregularity to the database; thus data becomes impractical for long-term maintenance and analysis. Data by 3D Scanning are more precise and quantitative in calculating the damages by a fire, the amount to repair and reinforce; furthermore, in evaluating the safety of the structure.

In this paper, we describe a sensor module that monitors fire environment by analyzing fire characteristics. We analyzed the smoke characteristics of indoor fire. Six different environments were defined according to the type of smoke and the flame, and the sensors available for each environment were combined. Based on this analysis, the sensors were selected from the perspective of firefighter. The sensor module consists of an RGB camera, an infrared camera and a radar. It is designed with minimum weight to fit on the robot. the enclosure of sensor is designed to protect against the radiant heat of the fire scene. We propose a single camera mode, thermal stereo mode, data fusion mode, and radar mode that can be used depending on the fire scene. Thermal stereo was effectively refined using an image segmentation algorithm, SLIC (Simple Linear Iterative Clustering). In order to reproduce the fire scene, three fire test environments were built and each sensor was verified.

콘크리트는 내화재료로서 우수한 성능을 발휘하지만 화재가 지속됨에 따른 재료특성 변화 또는 성능저하의 위험을 갖는다. 이 연 구는 실물모형 철근 콘크리트 (RC) 보를 활용하여 비재하 화재 실험을 수행하여 화재노출 전후의 콘크리트 및 보강철근의 재료특성을 실험적 으로 분석한 연구이다. 화재실험에 사용된 보는 길이 4 m의 RC 보로서 KS F 2257 화재실험 규격에 따라 시험 체를 제작 및 화재실험을 수행하 였다. 화원의 가력은 ISO 834의 표준화재 곡선을 사용하였으며 보 가열부에서의 온도를 계측하고자 하면 및 측면에 열전대를 설치하였다. 실 험결과, 화재에 노출된 화재 코어 공시체의 경우 약 11 MPa로 약 66%의 강도저하가 발생하였다. 화재에 직접 노출된 철근의 경우 노출되지 않 은 철근에 비해 약 17%에 해당하는 75 MPa의 항복강도 저하를 나타낸 것으로 분석되었다. 철근의 경우 콘크리트라는 내화피복에 의하여 보호 되어 약 4시간의 화재 실험에서도 온도는 한계온도의 최댓값인 649°C를 크게 상회하지 않는 것으로 나타났다.

본 연구에서는 화재조사데이터를 이용하여 화재에 영향을 미치는 각종 위험요인들을 파악하고자 통계적인 방법을 이용하여 화재피해, 화재원인, 발화환경을 분석하였다. 통계적인 분석과정에서 고려한 변수들은 화재조사데이터 181개와 통계청 데이터 26개로서 총 207개 가운데 유의미한 것으로 판단되는 184개만을 대상변수들로 선정하였다. 대상지역은 수도권지역(서울, 경기, 인천)을 대상으로 하여 화재발생유형의 정확한 원인을 반영할 수 있는 변수들을 도출하는데 역점을 두었다. 연구결과, 화재로 인한 인명피해는 수도권 전체 평균 대비 3지역(서울, 경기, 인천)은 큰 차이가 없는 것으로 나타났으며, 재산피해는 서울지역의 강북구, 서초구, 강남구, 종로구, 동대문구, 용산구, 금천구, 중구와 경기도 지역의 가평군, 이천시, 인천광역시의 옹진군 지역이 피해가 큰 것으로 나타났다. 화재원인 분석결과, 서울지역의 경우 화재유형, 발화요인, 동력원, 발화지점, 연소확대범위의 해당 변수에서는 지역구별 차이가 없는 것으로 나타났으며, 대부분 화재원인은 발화열원인 작동기기가 최빈값을 보였다. 또한, 최초착화물은 전기 및 전자, 발화기기에서는 주방기기, 연소확대물에서는 종이, 목재, 건초 등이 최빈값으로 나타났다. 경기도 지역의 경우는 발화층, 동력원, 화재유형 변수에서는 지역구별 차이가 없는 것으로 나타났으나, 화재원인으로 발화열원의 대부분은 작동기기가 최빈값을 보였으며 발화요인은 부주의가 많았고, 최초착화물은 쓰레기류와 위험물로 광명시와 시흥시가 각각 다르게 나타났다. 연소확대물로는 대부분 지역에서 종이, 목재, 건초 등이 최빈값으로 나타났다. 인천광역시의 경우는 발화층, 화재유형, 발화열원, 발화요인, 동력원, 연소확대범위의 해당 변수에서는 지역구별 차이가 없었으며, 최초착화물로는 종이, 목재, 건초, 전기, 전자가 최빈값으로 나타났다. 발화환경 분석결과로는 서울지역은 화재발생 시, 건물층수지상, 온도, 습도 변수들은 최빈값의 분포가 산만하여 지역별 특성을 나타내지 못하는 것으로 판단되었으며, 풍향은 대부분 지역이 북서풍이 최빈값으로 나타났다. 또한, 인천지역의 화재발생 시기는 남구지역을 제외한 그 외 지역은 1～3월에 화재가 많이 발생하였으며, 서구, 연수구를 제외한 나머지 지역의 최빈값은 주거지역인 것으로 나타났다.