동사성 어소와 명사성 어소로 구성된 복합동사(Noun Incorporation, 다음은 NI 합성어로 표 시) 언어 유형학 연구에서 많은 주목을 받았는데, 그 중 가장 큰 영향을 미친 것은 Mithun (1984)이 문법 담화 기능에 따라 제안한 NI 복합어의 네 가지 유형이었다. 중국어의 NI복합어는 매우 풍부하다. 본고는 선인들의 연구를 바탕으로 이런 단어를 유형학의 틀에 포함시켰다. 그 성분 관계, 결합가 변화, 기타 성분과의 대응 등 특징을 고찰함으로써 중국어의 NI복합어는 Mithun이 제기한 Ⅰ, Ⅱ, Ⅳ류 기능을 가진다는 것을 발견했다. 또한 본고는 역사적인 측면에서 NI복합어의 다른 유형 특징, 예를 들어 진화 경로, 내포 등급, 통합 정도 등을 검증했다. 중국어에 서 NI복합어의 역사적 변화는 보편적인 규칙에 부합되지만 통합 정도에서 비교적 느슨하다는 것을 발견했다. 이것은 주로 중국어에서 NI복합어가 구사 구조와 문법 구조를 겸하고 있기 때문 이다.

The thermoelectric effect, which converts waste heat into electricity, holds promise as a renewable energy technology. Recently, bismuth telluride (Bi2Te3)-based alloys are being recognized as important materials for practical applications in the temperature range from room temperature to 500 K. However, conventional sintering processes impose limitations on shape-changeable and tailorable Bi2Te3 materials. To overcome these issues, three-dimensional (3D) printing (additive manufacturing) is being adopted. Although some research results have been reported, relatively few studies on 3D printed thermoelectric materials are being carried out. In this study, we utilize extrusion 3D printing to manufacture n-type Bi1.7Sb0.3Te3 (N-BST). The ink is produced without using organic binders, which could negatively influence its thermoelectric properties. Furthermore, we introduce graphene oxide (GO) at the crystal interface to enhance the electrical properties. The formed N-BST composites exhibit significantly improved electrical conductivity and a higher Seebeck coefficient as the GO content increases. Therefore, we propose that the combination of the extrusion 3D printing process (Direct Ink Writing, DIW) and the incorporation of GO into N-BST offers a convenient and effective approach for achieving higher thermoelectric efficiency.

Chemical incorporation of epoxy-modified graphitic layers in epoxy/novolac phenolic resin matrices was carried out through co-curing of epoxy and novolac resins using triphenylphosphine as catalyst. First, (3-glycidyloxypropyl) trimethoxysilane (GPTMS) was grafted on graphene oxide (GO) surface to obtain epoxidized GO layers. Then epoxy resin and GPTMS-modified GO were incorporated into thermosetting reaction using novolac resin in the presence of triphenylphosphine. Covalent attachment of GPTMS-modified GO to the resin matrices resulted in a hybrid composite with high thermal characteristics. Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction, and Raman spectroscopy were used for approving modification of GO with GPTMS. The images resulted from scanning and transmission electron microscopies exhibited GO layers with lots of creases turning to smooth layers with a few thin ripples after modification with GPTMS. TGA results showed that thermal characteristics of resins were improved by the addition of GPTMS-modified GO. Char residue of the hybrid composites containing 0.5 and 1 wt% of GPTMS-modified GO reached 28.1 and 34.3%, respectively. Also, their maximum thermal degradation temperature was also increased by the incorporation of GPTMS-modified GO.

코이어 더스트와 수피를 동일한 비율로 혼합한 상토로 ‘싼타’ 딸기를 수경재배할 때 기비로 혼합된 유황의 처리수준 차이가 토양용액의 중탄산 농도, pH, 식물체의 생육 및 무기원소 흡수량에 미치는 영향을 구명하기 위해 본 연구를 수행하였다. 혼합상토 조제시 유황분말을 0, 0.23, 0.45, 0.90 및 1.80g·L-1으로 조절하여 혼합하였고, 작물 재배 중에는 중탄산 농도를 240mg·L-1으로 조 절한 Hoagland 용액을 관비하였다. 식물체의 생육조사 및 무기원소 함량 분석은 양액처리 140일 후에, 근권부 의 화학성 분석은 매 2주 간격으로 수행하였다. 유황의 시비수준이 증가할수록 모주의 전반적인 생장이 우수하였다. 엽록소 함량을 제외한 모주의 생장조사 항목에서 무처리구가 가장 저조하였고, 0.45g·L-1 이상의 세 처리 구간에서 통계적인 차이가 인정되지 않았다. 유황 처리 수준이 높아질수록 런너 발생 및 자묘의 생장 역시 우수해지는 경향을 보였다. 런너 길이, 모주당 발생한 자 묘수 및 1번 자묘의 생체중은 0.45g·L-1 보다 낮은 유황 처리구보다 0.90과 1.80g·L-1 처리구가 우수하였지만 두 처리 간에는 통계적인 차이가 없었다. 유황 0과 0.23g·L-1 처리구는 토양용액의 중탄산 농도와 pH가 지속적으로 상승한 반면 0.90g·L-1 이상 처리구에서 다소 낮아지는 경향이었다. 토양용액 내 K과 PO4의 농도는 0.90과 1.80g·L-1가 다른 처리구보다 낮았으며, Ca과 Mg의 농도는 처리구 간에 차이가 없었다. 유황 무처리구에서 분석한 무기원소 함량이 가장 적었으며, 유황 처리수준이 높아질수록 증가하였다. 이상의 결과, 코이어 더스트와 수 피 혼합상토(5:5, v/v)에서 ‘싼타’ 딸기를 수경재배할 때 양액의 중탄산 피해를 방지하고 식물 생육을 촉진시키기 위해서는 유황을 0.90g·L-1 이상 기비처리하는 것이 효과적이라 판단하였다.

Li-incorporated ZnO thin films were deposited by using ultrasonic-assisted spray pyrolysis deposition (SPD) system. To investigate the effect of Li-incorporation on the performance of ZnO thin films, the structural, electrical, and optical properites of the ZnO thin films were analyzed by means of X-ray diffraction (XRD), field-emssion scanning electron microscopy (FE-SEM), Hall effect measurement, and UV-Vis spectrophotometry with variation of the Li concentraion in the ZnO sources. Without incorporation of Li element, the ZnO surface showed large spiral domains. As the Li content increases, the size of spiral domains decreased gradually, and finally formed mixed small grain and one-dimensional nanorod-like structures on the surface. This morphological evolution was explained based on an anti-surfactant effect of Li atoms on the ZnO growth surface. In addition, the Li-incorporation changed the optical and electrical properties of the ZnO thin films by modifying the crystalline defect structures by doping effects.

Thin-film nanocomposite (TFN) reverse osmosis (RO) membranes have drawn keen attention to overcome the limitations in polymeric desalination membranes. However, preparation of TFN-RO membranes using conventional protocol involves problems such as a waste of expensive nanomaterials and inaccurate control of loading amount. In this work, we suggest a new protocol of TFN-RO membranes through pre-adsorption of carbon nanotubes (CNTs) on the support layer using spray coating. SEM images of spray coated supports showed well-dispersed adsorption of CNTs compared with those using conventional method. RO performances of TFN membranes using spray coating were comparable to conventionally prepared membranes. Thus, this new protocol is useful to prepare TFN membranes in terms of cost-efficiency.

Cellulose acetate-graft-(glycidylmethacrylate-g-polyethylene glycol) (CA-g- (GMA-g-PEG) was synthesized and incorporated into acetylated methyl cellulose (AMC) to prepare high rejection performance ultrafiltration membranes. H1-NMR and X-ray photoelectron spectroscopy study confirmed the successful synthesis of CA-g-(GMA-g-PEG) and utilized for hydrophilic modification agent. Polyethyleneimine(PEI), HumicAcid(HA) and Citric Acid(CA) ligands was used to bind the metal ions in aqueous solution.The rejection efficiency of AMC/CA-g-(GMA-g-PEG) blend membranes was studied in terms of pH, concentration and time. The successful developments would allow the safe and economical advancement in the fabrication of AMC blend membranes for ultrafiltration applications.

We demonstrate the electrochromic properties of TiO2 nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized TiO2 nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed TiO2 nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized TiO2 nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous TiO2 nanotubes annealed at 150°C have the largest oxidation/ reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologenanchored TiO2 nanotubes show superior electrochromic properties compared to pristine TiO2 nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of TiO2 nanotubes.

Reduction in the amount of Ag salts in the membranes is required for practical applications in the industry. However, since the separation performance is directly related to the amount of Ag salts, it has been difficult to reduce the amount of Ag salts. In this study, we succeeded in preparing polymer/Ag salts/Al(NO3)3 membranes with 30% reduction in the amount of Ag salts by utilizing KIT-6, which is a porous material. When KIT-6 was incorporated into the polymer/Ag salts/Al(NO3)3 membrane, the separation performance for propylene/propane mixed gas increased with a propylene over propane selectivity of 20 and mixed gas permeance of 10 GPU. The enhanced separation performance is attributed to both the coordination of hydroxyl groups in KIT-6 with Ag ions and the porous properties of KIT-6.

본 연구는 당근 재배지에서 녹비작물의 토양환원 효과를 구명하기 위해 수단그라스 및 크로타라리아 의 토양환원이 당근의 생육, 수량 및 품질향상에 미치는 영향을 조사하였다. 당근 재배를 위한 처리조 건은 무처리구, NPK처리구(N-P2O5-K2O= 20-9.6-12.2kg 10a-1), 크로타라리아(파종량 6kg 10a-1), 수단그라스(파종량 6kg 10a-1) 및 수단글라스 + 크로타라리아(파종량 3+3kg 10a-1)의 5개 처리구로 시 험하였다. 당근재배지에서 전작물로 재배된 녹비작물의 질소(N), 인(P2O5), 칼륨(K2O), 칼슘(CaO) 및 마그네슘(MgO) 공급량은 크로타라리아의 경우 각각 9.2, 9.8, 7.4, 12.9 및 2.5kg 10a-1이었고, 수단그 라스의 경우 각각 8.7, 8.9, 45.7, 5.2 및 2.8kg 10a-1이었으며, 혼합처리구(수단그라스 + 크로타라리 아)의 경우 각각 8.8, 9.9, 29.5, 2.6 및 1.7kg 10a-1이었다. 당근 재배지에서 녹비작물의 토양환원 후 토양의 이화학적 특성을 조사한 결과 녹비작물 처리구가 대조구에 비해 용적밀도는 약간 감소하였으며, 공극율은 용적밀도와는 달리 약간 증가하는 경향을 보였다. 토양내 유기물, T-N 및 유효 P2O5 함량은 녹비작물 처리구가 전반적으로 대조구에 비해 증가하였다. 당근의 품질을 나타내는 클로로필, 당도 및 β-카로티노이드 함량은 모두 크로타라리아 처리구에서 가장 높았으며, 대조구에서 가장 낮은 함량을 보였다. 당근의 장해율은 녹비작물 처리구가 대조구에 비해 감소하는 경향이었고, 당근의 상품수량은 크로타라리아 + 수단그라스 혼합처리구(3,530kg 10a-1)가 대조구(2,101kg 10a-1)에 비해 68%의 증수효 과를 보였다. 따라서 당근 재배지에서 수단그라스 + 크로타라리아 혼합처리는 화학비료의 절감효과가 있으며, 특히 토양환원 후 토양의 물리성 및 화학성을 개선함으로써 당근의 상품수량 및 품질향상을 증 대시킬 수 있을 것으로 판단된다.

hydroxycinnamic acid인 ferulic acid와 caffeic acid는 강력한 식물성 항산화제 이다. DPPH 수용액에서 이들의 자유라디칼 소거능과 높은 온도, 금속 이온과 같은 산화촉진 요인에 대한 화학적 안정성 등을 살펴보았다. 아스코르빅 산의 안정성 향상을 위해 ferulic acid와 caffeic acid를 아스코르빅산 수용액에 첨가하였다. 아스코르빅 산의 안정성 향상은 시간경과에 따른 SC50 값의 변화로부터 확인하였다. 아스코르빅 산을 ferulic acid 또는 caffeic acid와 조합하여 BGsome 안에 포집시켜본 결과, 아스코르빅 산의 안정성이 순수한 용액 상태로 있을 때에 비해 크게 향상되었다.

As an attempt to develop a value-added food product, purple sweet potato powder was added in a model system of steamed bread as a healthy food ingredient and physicochemical properties such as moisture content, specific volume, spread ratio, color, texture as well as consumer preferences on the attributes such as uniformity, color, flavor, elasticity, chewiness, taste, and overall preference were evaluated. Moisture content ranged from 44.16 to 44.55% (wet basis) and appeared independent on the level of purple sweet potato (PSP) powder incorporation. As a result of the addition of PSP powder, the specific volume of steamed bread decreased from 3.22 to 2.55 mL/g, and value of 4.5% sample was significantly lower than other samples (p<0.05). On the other hand, spread ratio ranged from 2.01 to 2.53, and appeared to decrease as the PSP powder concentration increased (p<0.05), indicating a significant improvement. Lightness (L*) decreased significantly as the PSP powder content increased (p<0.05) for both dough and skin of the steamed bread. In addition, an increasing trend in redness (a*-value) and a decreasing trend in yellowness (b*-value) were noticed. Firmness increased significantly with the addition of PSP powder regardless of concentration (p <0.05); however, firmness was not significantly different among samples containing 1.5-4.5% PSP powder (p>0.05). Consumer acceptance test indicated that incorporation of 3% PSP powder in the formulation of steamed breads would be recommended.

Freeze-dried broccoli powder was incorporated into cookie dough at 5 levels (0, 1, 2, 3, and 4%, w/w) by replacing equivalent amount of wheat flour of the cookie dough. After aging and sheeting, cookies were baked at 170oC for 8 min in an oven. The baked cookies were cooled to room temperature for 1 hr and packed in airtight bags prior to all measurements. The pH and moisture content were ranged 6.74-6.90 and 2.67-4.12% (wet basis) depending on the broccoli powder level, respectively. Lightness (L*-value), redness (a*-value), and hardness decreased while yellowness (b*-value) increased significantly as the broccoli powder content increased (p<0.05). Spread factor of the control was significantly lower than that of samples containing broccoli powder regardless of the concentration (p<0.05) and increased significantly with increase in broccoli powder content (p<0.05). The broccoli concentration correlated significantly with most of properties except for pH and spread factor (p<0.05 or p<0.01). Hardness correlated negatively with moisture content (p<0.05) but correlated positively with spread factor (p<0.01).

The effect of silver nanoparticles (NPs) incorporation on the electronic properties of poly (3, 4-ethylenedioxythiphene) : poly(styrenesulfonate) (PEDOT : PSS) films was investigated. The surface of silver NPs was stabilized with trisodium citrate to control the size of silver NPs and prevent their aggregation. We obtained ca. 5 nm sized silver NPs and dispersed NPs in PEDOT : PSS solution. Sheet resistance, surface morphology, bonding state, and work function values of the PEDOT : PSS films were modified by silver NPs incorporation as well as annealing temperature. Sodium in silver NPs solution could lead to a decrease of work function of PEDOT : PSS; however, large content of silver NPs have an effect on the increase in work function, resulting from charge localization on the silver NPs and a decrease in the number of charge-trapping-related defects by chemical bond formation.

Samples of GaMnAs, GaMnAs codoped with Be, and GaMnAs simultaneously codoped with Be and Mg were grown via low-temperature molecular beam epitaxy (LT-MBE). Be codoping is shown to take the Ga sites into the lattice efficiently and to increase the conductivity of GaMnAs. Additionally, it shifts the semiconducting behavior of GaMnAs to metallic while the Mn concentration in the GaMnAs solid solution is reduced. However, with simultaneous codoping of GaMnAs with Be and Mg, the Mn concentration increases dramatically several times over that in a GaMnAs sample alone. Mg and Be are shown to eject Mn from the Ga sites to form MnAs and MnGa precipitates.

In the Ti(CN)-Co/Ni cermet, WC is an effective additive for increasing sinterability and mechanical properties such as toughness and hardness. In this work, WC, (WTi)C and (WTi)(CN) were used as the source of WC and their effects were investigated in the respect of microstructural evolution and mechanical properties. Regardless of the kinds of WC sources, the hard phase with dark core and bright rim structure was observed in the Ti(CN)-Co/Ni cermet under the incorporation of relatively small amount of WC. However, hard phases with bright core began to appear and their frequency increased with the increase of all kinds of WC source addition. The ratio of bright core to dark one in the (TiW)(CN)-Co/Ni cermet was greatest under the incorporation of (WTi)C compared at the same equivalent amount of WC. The mechanical properties were improved with the addition of WC irrespective of the kinds of sources, but the addition of (WTi)(CN) was less effective for the increase of fracture toughness.

As a pa rt 0 1' the effort to develop a suitable scaffold for tissue-engineered bone regene ration, we modified calcium metaphosphate(CMP) ce ramic with 5 mol% Na20 or K20 to improve t he biodegradability and evaluated their effi ciency as a biodegr adable scaffold for ti ssue-engineered bone regeneration. The macroporous αiIP ceramic blocks incor porated with 5 mol% Na20 or K20 were prepa recl to have average pore size of 250 um in an inte rconnectecl framework structure The influ e nce of inco r pora tecl 5 mol% Na20 or K20 on cytotoxicity‘ cellular attachmont and t heir clifferentiation was evaluated by in vit ro analyzing sys tern. res pectively. The bioclegradability, histocompatibility, and osteogenic effect by cell-scaffolcl co nstruc ts were evalua ted by im plantation of them into subcutaneous pouches of SD-rats 0 1' SCID ITllce The incorporation of 5 mol% Na20 or K20 causecl clecrease of compressive strength without improving of biodegr adabili ty . The moclifi ed scaffolcls revea led no cy totoxic and excell ent biocompatability but osteogneic effect was recluced compa red to pure CMP ce ramic porous blocks . These res ul Ls s ugge::;t tha t the incorporation of 5 mol% Na20 0 1' K20 into pure CMP is not effective for improv ing effï ciency 0 1' scaffolcls fo1' tissue-engineered bone regeneration in terms of bioclegradabi li ty‘ physical s trength . a ncl osteogenic rege ne ra tive effect