지방산 혼합물 단분자층 LB막의 전기화학적 특성을 통하여 그 안정성을 순환전압전류법으로 조사하였다. 지방산혼합물 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적 특성은 0.01N KClO4 용액에서 3 전극 시스템으로 순환전압전류법에 의해 측정하였다. 측정범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 지방산혼합물 LB막은 순환전압전류곡선으로부터 산화전류로 인한 비가역 공정으로 나타났다. 지방산혼합물 LB막은 전해질농도가 0.01 N NaClO4 용액에서 확산계수(D)는 각각 7.9×10-2 cm2s-1을 얻었다.

포화지방산과 인지질(DMPC)혼합 LB막에 대한 전기화학적 특성을 조사하였다. 포화지방산과 DMPC 혼합 단분자 LB막은 ITO glass에 Langmuir-Blodgett법을 사용하여 제막하였다. 전기화학적 특 성은 NaClO4 용액에서 3 전극 시스템 (Ag/AgCl 기준전극, 백금선 카운터 전극 및 LB 필름이 코팅된 ITO 작업 전극)으로 순환전압전류법을 사용하여 측정하였다. 그 결과 포화지방산과 인지질(DMPC)의 LB막은 순환전압전류도표로부터 산화전류로 인한 비가역공정으로 나타났다. 포화지방산과 인지질 (DMPC)혼합(몰비 1:1) LB막(C14, C16, C18, C20)에서 확산계수(D)는 0.05 N NaClO4에서 각각 1.2x10-3, 2.1x10-3, 1.4x10-4 및 1.1x10-3 cm2/s로 산출되었다.

포화지방산(C12, C14, C16, C18) 단분자층 LB막의 전기화학적 특성을 통하여 그 안정성을 순환전압전류법으로 조사하였다. 포화지방산 단분자층 LB막은 ITO glass에 LB법을 사용하여 제막하였 다. 전기화학적 특성은 0.1 N NaClO4 용액에서 3 전극 시스템으로 순환전압전류법에 의해 측정하였다. 측정범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각 각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 포화지방산 LB막은 순환전압전류곡선으로 부터 산화전류로 인한 비가역공정으로 나타났다. 포화지방산 LB막의 확산계수(D)를 산출한 결과 각각 라우르산, 2.223x10-3 cm2/s, 미리스트산, 2.461x10-4 cm2/s, 팔미트산, 7.114x10-4 cm2/s 및 스테아르 산, 2.371x10-4을 얻었다.

인지질(L-α-phosphatidylethanolamine, LAPE) 단분자층 LB막의 전기화학적 특성을 통하여 그 안정성을 순환전압전류법으로 조사하였다. LAPE 단분자층 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적특성은 0.5 N, 1.0 N, 1.5 N 및 2.0 N KClO₄ 용액에서 3 전극 시스템으로 순환전압전류법에 의해 측정하였다. 측정범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 LAPE LB 막은 순환전압전류곡선으로부터 산화전류로 인한 비가역공정으로 나타났다. LAPE LB막은 전해질농도가 0.01 N, 0.05 N. 0.10 N, 0.15 N 과 0.20 N KClO4 용액에서 확산계수(D)는 각각 195, 15.9, 5.75, 1.38 및 0.754 cm²s-¹×10-9을 얻었다.

순환전압전류법에 의한 인지질(sphingomyelin, SP)과 polyamic acid(PAA) 혼합물의 농도(몰비 1:1, 2:1 및 3:1)를 변화시켜 혼합단분자 LB막에 대한 전기화학적 특성을 조사하였다. SP과 PAA 혼합물의 단분자 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적 특성은 KClO₄ 용액에서 3 전극 시스템으로 측정하였다. 측정 범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50∼250 mV/s로 설정하였다. 그 결과 SP와 PAA 혼합물의 LB막은 순환전압전류도표로부터 환원전류로 인한 비가역공정으로 나타났다. 혼합물 LB막의 혼합(SP:PAA) 몰비가 1:1, 2:1 및 3:1에서 확산계수(D)는 각각 2.670×10-5, 3.562×10-5 및 1.005×10-5 cm²s-¹을 얻었다.

우리는 순환전압전류법에 의한 인지질(sphingomyelin)과 polyamic acid 혼합물의 단분자 LB막에 대한 전기화학적 특성을 조사하였다. Sphingomyelin과 polyamic acid 혼합물의 단분자 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적 특성은 KClO4 용액에서 3 전극 시스템으로 측정하였다. 측정 범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 sphingomyelin과 polyamic acid 혼합물의 LB막은 순환전압전류도표로부터 환원전류로 인한 비가역공정으로 나타났다. Sphingomyelin과 polyamic acid 혼합물 LB막에서 전해질농도가 0.1N과 0.2N에서 확산계수(D)는 각각 2.67cm2s-1×105과 5.23cm2s-1×106을 얻었다.

우리는 순환전압전류법에 의한 폴리이미드와 인지질혼합 나노LB 필름에 대한 전기화학적 특성을 조사하였다. polyamic acid와 인지질 단분자 LB막은 ITO glass에 Langmuir-Blodgett법을 사용하여 제막하였다. 전기화학적 특성은 KClO4 용액에서 3 전극 시스템 (Ag/AgCl 기준전극, 백금선 카운터 전극 및 LB 필름이 코팅된 ITO 작업 전극)으로 순환전압전류법을 사용하여 측정하였다. 측정 범위는 연속적으로 1650 mV로 산화시키고, 초기전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s였다. 그 결과 polyamic acid와 인지질 혼합물의 LB 필름은 순환전압전류도표로부터 환원전류로 인한 비가역공정으로 나타났다. Polyamic acid와 인지질혼합 LB막에서 확산계수(D)효과는 LAPC를 사용한 경우가 LLPC를 사용한 것 보다 확산계수 값이 적었다.

우리는 순환전압전류법에 의한 LB 필름에 대한 전기화학적 특성을 조사하였다. 인지질 화합물은 ITO glass에 Langmuir-Blodgett법을 사용하여 제막하였다. 0.5, 1.0, 1.5 및 2.0 N NaClO4 용액에서 3 전극 시스템 (Ag/AgCl 기준전극, 백금선 카운터 전극 및 LB 필름이 코팅된 ITO 작업전극)으로 순환전압전류법을 사용하여 전기화학적 측정을 시도하였다. 측정 범위는 연속적으로 1650 mV로 산화시키고, 초기전위인 -1350 mV로 환원시켰다. 그 결과, 인지질 화합물의 LB 필름은 순환전압전류도표로부터 오직 산화전류로 인한 비가역공정으로 나타났다. LB 필름의 확산계수(D) 효과는 인지질 화합물 양의 증가로 인하여 감소하였다.

Displacement current measuring technique has been applied on the study of polyamic acid monolayer containing p-nitroazobenzene. The displacement current was generated from monolayer on the water surface by monolayer compression and expansion. Maxwell displacement current(MDC) was generated when the area per molecule was about 200a2 and 70a2. Maxwell displacement currents were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The monolayer surface morphology of the LB film have been measured by Atomic Force Microscope(AFM). As a result, we confirmed that the microscopic properties of LB film by AFM showed the good orientation of monolayer molecules and the thickness of monolayer was 3.5-4.1nm.

We investigated the electrochemical properties for Langmuir-Blodgett(LB) films mixed with l-bromotetradecane(Cl4), l-bromohexadecane(Cl6), and l-bromooctadecane(Cl8). The alkyl bromides mixture was deposited by using the Langmuir-Blodgett method on the ITO glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, 1.5 and 2.0 N) of NaClO4 solution. A measuring range was reduced from initial potential to -1350 m V, continuously oxidized to 1650 mV. The scan rate was 100 mV/s. As a result, LB films of Cl4, Cl6, and Cl8 mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl bromides amount.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films of functionalized polyimide. LB films of polyimide monolayer were deposited by the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, and 1.5 N) of NaClO4 solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100 and 150 mV/s, respectively. As a result, monolayer and multilayer LB films of polyimide are appeared on irreversible process caused by the oxidation current from the cyclic voltammogram.

We carried out this experiment to observe an electrochemical properties for LB films of alkyl compounds by the cyclic voltammetry. Alkyl bromides was deposited by using the Langmuir- Blodgett method on the ITO glass. We measured to an electrochemical measurement by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in 0.5, 1.0, 1.5 and 2.0 N NaClO4 solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV. The scan rate were 100 mV/s. As a result, an electrochemical properties of the LB films of alkyl bromides appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl compounds amount.

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about 103a2 and 78a2 just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with fatty acid (8A5H) and phospholipid (DLPE, DMPC, and DPPA). LB films of 8A5H monolayer and 8A5H-phospholipid mixture were deposited using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured using cyclic voltammetry with three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of NaClO4 solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate was 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of fatty acid and phospholipid (8A5H/DLPE and DPPA) appeared irreversible process were caused by only the reduction current from the cyclic voltammogram and LB film of 8A5H-DMPC mixture was found to be caused by a reversible oxidation-reduction process.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and phospholipid(L-α-dimyristoylphosphatidylcholine, denoted as DMPC). LB films of 8A5H monolayer and 8A5H-DMPC were deposited by using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a threeelectrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0mol/L) of NaClO4 solution. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650mV and measured to the initial point. The scan rates were 50, 100, 150 and 200mV/s, respectively. As a result, LB films of 8A5H monolayer appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC mixture were found to be caused by a reversible oxidation-reduction process.

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(θ) of the dipole moment appears in about 68˚ and the tilting angle of the alkyl chain is about 11.5˚.

Electron transfer through an Langmuir-Blodgett(LB) monolayer film sandwiched between metal electrodes. We used an eicosanoic acid material and the material was very famous as a thin film insulating material. Eicosanoic acid monolayer was deposited by Langmuir-Blodgett(LB) technique and a subphase was a CdCl2 solution as a 2×10-4 mol/L. Also we used a bottom electrode as an Al/Al2O3 and a top electrode as a Al and Ti/Al. Here, the Al2O3 on the bottom electrode was deposited by thermal evaporation method. The Al2O3 layer was acted on a tunneling barrier and insulating layer in tunnel diode. It was found that the proper transfer surface pressure for film deposition was 25 mN/m and the limiting area per molecule was about 24 a2/molecule. When the positive and negative bias applied to the molecular device, the behavior shows that a tunnel switching characteristics. This result were analyzed regarding various mechanisms.

We carried out this experiment to observe electrochemical properties for LB films of phospholipid(Dilauroyl-L-α-Phosphayidylcholine) and 4-octyl-4'-(5-carboxypentamethylene-oxy)azobenzene mixture by the cyclic voltammetry. LB films of 8A5H and 8A5H-DLPC(1:1, 2:1) were deposited by using the Langmuir-Blodgett method on the ITO glass. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference elect rode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in 0.1, 0.5, and 1.0 mol/L NaClO4 solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150 and 200 mV/s. As a result, LB films of 8A5H 8A5H-DLPC appeared irreversible process caused by only the oxidation current from the cyclic voltammogram.

Ultra-thin films of organic charge transfer complex were prepared on a hydrophilic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a LB film consisting of (N-docosyl quinolinium)-TCNQ(1:2) complex was investigated. The visible light(λ : 700 nm) of xenon lamp was illuminated on the LB films and light absorptivity and photoconductivity were observed. The photocurrent increased linearly and was saturated at the light intensity of 23 μW/cm2.

Langmuir-Blodgett(LB) 법은 미래의 분자전자소자를 위한 가장 유력한 수단이며, 이러한 분자박막 소자는 그 성질이 분자는 배향에 영향을 박데 되므로 현재 새로운 물질을 이용하여 분자전자소자의 제작에 있어 관심을 모으고 있다. 본 연구에서는 (N-docosyl quinolinium)-TCNQ(1:2) 전하 이동 착물 LB 막의 분자 배향을 UV/vis 편광흡수 스펙트럼과 FT-IR transmission 및 reflection-absorption 스펙트럼의 흡수강도를 비교하여 정량적으로 평가하였다. 그 결과 TCNQ의 transition dipole moment의 각은 약 56~58。 였으며, 알킬 고리의 경사각은 약 11.1~13。였다. 제작된 Z-형 LB 막의 표면은 고압에서 중앙 높이 차가 3~4Å으로 평탄하였다.