Near infrared reflectance spectroscopy (NIRS) is routinely used for the determination of nutrient components of forages. However, little is known about the impact of sample preparation and wavelength on the accuracy of the calibration to predict minerals. This study was conducted to assess the effect of sample preparation and wavelength of near infrared spectrum for the improvement of calibration and prediction accuracy of Calcium (Ca) and Phosphorus (P) in imported hay using NIRS. The samples were scanned in reflectance in a monochromator instrument (680–2,500 nm). Calibration models (n = 126) were developed using partial least squares regression (PLS) based on cross-validation. The optimum calibrations were selected based on the highest coefficients of determination in cross validation (R2) and the lowest standard error of cross-validation (SECV). The highest R2 and the lowest SECV were obtained using oven-dry grinded sample preparation and 1,100-2,500 nm wavelength. The calibration (R2) and SECV were 0.99 (SECV: 468.6) for Ca and 0.91 (SECV: 224.7) for P in mg/kg DM on a dry weight, respectively. Results of this experiment showed the possibility of NIRS method to predict mineral (Ca and P) concentration of imported hay in Korea for routine analysis method to evaluate the feed value.

In this study, whole crop rice samples were used to develop near-infrared reflectance (NIR) equations to estimate six forage quality parameters: Moisture, crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), Ash and relative feed value (RFV). A population of 564 whole crop rice representing a wide range in chemical parameters was used in this study. Undried finely chopped whole crop rice samples were scanned at 1 nm intervals over the wavelength range 680–2500 nm and the optical data recorded as log 1/Reflectance (log 1/R). NIRS calibrations were developed by means of partial least-squares (PLS) regression. The correlation coefficients of cross-validation (R2 cv) and standard error of cross-validation (SECV) for whole crop rice calibration were 0.98 (SECV 1.81%) for moisture, 0.89 (SECV 0.50%) for CP, 0.86 (SECV 1.79%) for NDF, 0.89 (SECV 0.86%) for ash, and 0.84 (SECV 5.21%) for RFV on a dry matter (%), respectively. The NIRS calibration equations developed in this study will be useful in predicting whole crop rice quality for these six quality parameters.

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid and accurate method of evaluating some chemical compositions in forages. The objective of this study was to evaluate the potential of NIRS, applied to imported forage, to estimate the moisture and chemical parameters for imported hays. A population of 392 imported hay representing a wide range in chemical parameters was used in this study. Samples of forage were scanned at 1 nm intervals over the wavelength range 680-2500nm and the optical data was recorded as log 1/Reflectance(log 1/R), which scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares(PLS) multivariate analysis in conjunction with spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected based on the highest coefficients of determination in cross validation(R2) and the lowest standard error of cross-validation(SECV). The results of this study showed that NIRS predicted the chemical parameters with very high degree of accuracy. The R2 and SECV for imported hay calibration were 0.92(SECV 0.61%) for moisture, 0.98(SECV 0.65%) for acid detergent fiber, 0.97(SECV 0.40%) for neutral detergent fiber, 0.99(SECV 0.06%) for crude protein and 0.97(SECV 3.04%) for relative feed value on a dry matter(%), respectively. Results of this experiment showed the possibility of NIRS method to predict the moisture and chemical composition of imported hay in Korea for routine analysis method to evaluate the feed value.

This study was carried out to explore the accuracy of near infrared spectroscopy(NIRS) for the prediction of moisture content and chemical parameters on winter annual forage crops. A population of 2454 winter annual forages representing a wide range in chemical parameters was used in this study. Samples of forage were scanned at 1nm intervals over the wavelength range 680-2500nm and the optical data was recorded as log 1/Reflectance(log 1/R), which scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares(PLS) multivariate analysis in conjunction with spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected based on the highest coefficients of determination in cross validation(R2) and the lowest standard error of cross-validation(SECV). The results of this study showed that NIRS calibration model to predict the moisture contents and chemical parameters had very high degree of accuracy except for barely. The R2 and SECV for integrated winter annual forages calibration were 0.99(SECV 1.59%) for moisture, 0.89(SECV 1.15%) for acid detergent fiber, 0.86(SECV 1.43%) for neutral detergent fiber, 0.93(SECV 0.61%) for crude protein, 0.90(SECV 0.45%) for crude ash, and 0.82(SECV 3.76%) for relative feed value on a dry matter(%), respectively. Results of this experiment showed the possibility of NIRS method to predict the moisture and chemical composition of winter annual forage for routine analysis method to evaluate the feed value.

Nutritive value analysis of feed is very important for the growth of livestock, and ensures the efficiency of feeds as well as economic status. However, general laboratory analyses require considerable time and high cost. Near-infrared reflectance spectroscopy (NIRS) is a spectroscopic technique used to analyze the nutritive values of seeds. It is very effective and less costly than the conventional method. The sample used in this study was a corn kernel and the partial least square regression method was used for evaluating nutrient composition, digestibility, and energy value based on the calibration equation. The evaluation methods employed were the coefficient of determination (R2) and the root mean squared error of prediction (RMSEP). The results showed the moisture content (R2val=0.97, RMSEP=0.109), crude protein content (R2val=0.94, RMSEP=0.212), neutral detergent fiber content (R2val=0.96, RMSEP=0.763), acid detergent fiber content (R2val=0.96, RMSEP=0.142), gross energy (R2val=0.82, RMSEP=23.249), in vitro dry matter digestibility (R2val=0.68, RMSEP=1.69), and metabolizable energy (approximately R2val >0.80). This study confirmed that the nutritive components of corn kernels can be predicted using near-infrared reflectance spectroscopy.

This work was conducted to assess the use of Near-infrared reflectance spectroscopy (NIRS) as a technique to analyze nutritional constituents of Distillers dried grain with solubles (DDGS) and corn quickly and accurately, and to apply an NIRS-based indium gallium arsenide array detector, rather than a NIRS-based scanning system, to collect spectra and induce and analyze calibration equations using equipment which is better suited to field application. As a technique to induce calibration equations, Partial Least Squares (PLS) was used, and for better accuracy, various mathematical transformations were applied. A multivariate outlier detection method was applied to induce calibration equations, and, as a result, the way of structuring a calibration set significantly affected prediction accuracy. The prediction of nutritional constituents of distillers dried grains with solubles resulted in the following: moisture (R2=0.80), crude protein (R2=0.71), crude fat (R2=0.80), crude fiber (R2=0.32), and crude ash (R2=0.72). All constituents except crude fiber showed good results. The prediction of nutritional constituents of corn resulted in the following: moisture (R2=0.79), crude protein (R2=0.61), crude fat (R2=0.79), crude fiber (R2=0.63), and crude ash (R2=0.75). Therefore, all constituents except for crude fat and crude fiber were predicted for their chemical composition of DDGS and corn through Near-infrared reflectance spectroscopy.

본 연구는 춘파용 사초의 사료가치를 신속하고 정확하게 측정할 수 있는 습식분석의 대안을 모색하기 위하여 수행하였다. 근적외선분광 분석법을 이용한 사초의 분석 가능성을 타진하기 위해 2009년에 생산된 사초 175점을 시료로 사용하였다. 시료는 이탈리안 라이그라스와 보리, 그리고 완두를 혼파한 것으로 NIR System으로 400~2,400nm 사이의 파장을 얻었다. 그리고 수분, 조단백질, 조회분, NDF, ADF를 분석한 다음, 파장과 습식분석치를 이

근적외선 분광 분석법을 이용하여 참깨의 지방함량의 신속측정 가능성에 대해서 연구하였다. 검량식의 기본 모형은 다중 회귀 모형으로 하였으며, 회귀 모형의 독립 변수의 선택은 step-wise법을 이용하였다. 1. 참깨의 121점 중 지방산 함량 분포는 palmitic acid(IT028899-7.2%, IT169359-10.0%), stearic acid(IT028897-4.5%, IT028910-7.0%), oleic acid(IT170020-32.2%, IT156371-46.5%), linoleic acid(IT156348-36.5, IT169926-49.6%), 그리고 linolenic acid(IT169316-0.2%, IT156367-0.6%)로 나타났다. 2. 지방함량을 예측하기 위해서 검량선 작성시 종래의 화학적 방법에 의한 분석치와 NIRS 분석치 와의 상관계수는 oleic acid(r2-0.834) and linoleic acid(r2-0.925)로 판단되어 linoleic acid의 이용은 가능할 것으로 판단되었다.

본 연구의 목적은 축우용 TMR 사용이 점차 증가하고 있으나 TMR의 영양성분을 측정하고자 할 경우 실험실 분석에 의존하므로 많은 비용과 시간이 소요되어 농가 현장에서 활용하기가 어려움에 따라 NIRS(Near InfraRed Spectroscopy, 근적외선분광분석기)을 이용하여 TMR에 대한 신속하고 간편하게 사료가치를 평가하기 위한 검량선을 작성하기 위하여 실시하였다. 근적외선 분광분석법은 친환경 분석으로서 시약의 사용이 전혀 없고, 폐수 및 유해

본 연구는 청예용 사초의 질을 신속하고 정확하게 측정할 수 있는 대안을 모색하기 위하여수행하였다. 근적외선분광분석법을 이용한 사초의 분석가능성을 타진하기 위해 2002년부터 2007년에 거쳐 생산된 각종 사초 258점을 시료로 사용하였다. 즉 시료는 조단백질, 조섬유, NDF, ADF 그리고 건물소화율을 분석하였으며, 또한 NIR System으로 사이의 파장을 얻었다. 그리고 파장과 습식분석치를 이용하여 중회귀식을 만들고 이것을 사용하여 미지의 시료를

본 연구는 시료 및 스펙트럼의 전처리 방법이 근적외선 분광법을 이용한 옥수수 사일리지의 화학적 조성분의 예측능력에 미치는 영향을 평가하기 위해 수행되었다. 시료의 전처리 방법은 건조하여 분쇄하는 방법(Oven Dried Grinding), 액화 질소처리 후 분쇄하는 방법(Liquid Nitrogen Grinding) 그리고 생사일리지(Intact Fresh)처리로 하였으며 4개의 스펙트럼의 수처리(1,4,4, 2,6,4, 2,10,5) 방법을 이용하여

본 시험의 목적은 옥수수 사일리지의 소화율 및 에너지가치를 신속하고 정확하게 평가하는 방법으로서 근적외선분광법(NIRS)의 이용성을 확대하고 동시에 더욱 정확한 검량식을 유도하기 위하여 수행되었다. 112점의 옥수수 사일리지 시료를 이용하여 근적외선분광기를 이용하여 스펙트럼을 수집하였다. 검량기법은 변형부분 최소자승회귀법(MPLS), 산란보정법은 SNV-D 또한 1,4,4,1 수처리 방법을 이용하여 검량식을 작성하였다. 옥수수 사일리지의 소화율 측정방법

Farmers need timely information on the nutritional status of their animals and the nutritive value of pastures and supplementary feeds if they are to apply successfully this existing nutritional information. Near infrared reflectance(NIR) spectroscopy has

Sesame seed (Sesamum indicum L.) is an important seasoning in Korea and most korean consumer tend to eat the korean sesame seed as the best than other ones produced in oriental countries such as China and Japan. Near infrared reflectance spectroscopy (NIRS) was applied for discrimination according to geographical origin (Korea, China and so on) of sesame seeds. Near-infrared spectroscopy among the many kinds of techniques could provide a rapid screening, low cost solution to discriminate geographical origin of sesame seed. The objective of this study is to determine if NIR technique could be used to discriminate between the korean sesame seed and non-korean sesame seed by using the new method. Rapid, precise and nondestructive analysis method for determination of the geographic origin of sesame seeds were discriminated relative accurately according to geographical origin using PLS regression method.

A statistical analysis for 3651 genetic resources collected from China (1,542), Japan (1,409), Korea (413), and India (287) was conducted using normal distribution, variability index value (VIV), analysis of variation (ANOVA) and Ducan’s multiple range test (DMRT) based on a data obtained from NIRS analysis. In normal distribution, the average protein content was 8.0%, whereas waxy type amylose and common rice amylose were found to be 8.7% and 22.7%, respectively. The protein contents ranged from 5.4 to 10.6% at the level of 95%. The waxy amylose and common rice amylose ranged from 5.9 to 11.5%, and from 16.9 to 28.5% at 95% confidence level, respectively. The VIV was 0.59 for protein, 0.64 for low amylose, and 0.81 for high amylose contents. The average amylose contents were 18.85% in Japanese, 19.99% in Korean, 20.27% in Chinese, and 25.46% in Indian resources, while the average protein contents were found to be 7.23% in Korean, 7.73% in Japanese, 8.01% in Chinese, and 8.17% in Indian resources. The ANOVA of amylose and protein content showed significant differences at the level of 0.01. The F-test for amylose content was 158.34, and for protein content 53.95 compared to critical value 3.78. The DMRT of amylose and protein content showed significant difference (p<0.01) between resources of different countries. Japanese resources had the lowest level of amylose contents, whereas, the lowest level of protein content was found in Korean resources compared to other origins. Indian resources showed the highest level of amylose and protein contents. It is recommended these results should be helpful to future breeding experiments.

This study was conducted to characterize the amylose and protein contents of 4,948 rice landrace germplasm using the NIRS model developed in the previous study. The average amylose content of the germplasm was 20.39% and ranged between 3.97 and 37.13%. The amylose contents in the standard rice were 4.99, 18.63 and 20.55% in Sinseonchal, Chucheong and Goami, respectively. The average protein content was 8.17% and ranged from 5.20 to 17.45%. Protein contents in Sinseonchal, Chucheong and Goami were 6.824, 6.869 and 7.839%, respectively. A total of 62% germplasm were distributed between 20.06% and 27.02% in amylose content. Germplasm of 81.60% represented protein content of 6.78-9.75%. The distinguishable ranges of amylose contents according to origin were 16.58-20.06% in Korea, 20.06-23.25% in Japan, 23.25-27.02% in North Korea, and 27.02-37.13% in China. In the protein content, approximately 30% of Chinese resources ranged from 9.75 to 17.45%, whereas less than 10% were detected in other origin accessions. Fifty resources were selected with low and high amylose ranging from 3.97-6.66% and 30.41-37.13%, respectively. Similarly, fifty resources were selected with low and high protein ranging from 5.20-6.09% and 13.21-17.45%, respectively. Landraces with higher protein could be adapted to practical utilization of food sources.