본 연구에서는 국내 밭작물 재배농가에서 주로 사용되는 캠방식 채소 정식기를 대상으로 작동특성 및 식부장치 작동 메커니즘 분석을 수행하였다. 정식기의 주요 구성요소 및 동력전달경로를 파악하였으며, 주행속도 및 주간거리 단수 변화에 따른 최대 및 최소 작동주기를 도출하였다. 이를 바탕으로 3D모델링 및 시뮬레이션을 수행하여 식부호퍼 극하단점의 궤적 및 조건별 주간거리를 도출하였으며 필드시험을 통해 실제 주간거리와 비교 검증하였다. 주요 결과로써, 식부장치는 13개의 링크와 17개의 회전 조인트 및 1개의 하프 조인트로 구성된 1 자유도의 기구이며, 각 부분들은 캠과 링크장치들의 복합구조를 갖는다. 식부장치 요소들의 연속적이고 반복적인 운동에 의해 식부호퍼는 지면과 연직인 자세를 유지하며 묘를 안정적으로 정식한다. 동력은 엔진과 변속기를 통해 주행부 및 식부장치로 전달되었으며 식부 장치의 최대 및 최소 주간거리는 각각 약 900 mm 및 350 mm이다.

본 연구에서는 국내에서 주로 사용되는 채소 정식기를 대상으로 전체적인 작동 특성을 분석하였다. 식부장치 거동에 영향을 주는 주요 구성요소 및 동력전달경로를 파악하였으며, 식부장치의 링크 구조를 기구적으로 분석하고 3D모델링 및 시뮬레이션을 수행하였다. 이를 바탕으로 식부호퍼 극하단점의 궤적을 분석하였다. 또한 엔진회전속도 및 식부변속단수 변화에 따른 주간거리를 도출하고 필드시험을 통해 검증하였다. 주요 결과로써, 식부장치는 10개의 링크와 13개의 회전 조인트로 구성된 1 자유도의 기구이며 각 부분들은 4절 링크식으로 구성되어 있었다. 링크장치의 거동에 의해 식부호퍼는 일정한 자세를 유지하면서 연직 방향으로 묘를 심어준다. 동력은 엔진을 통해 주행부 및 식부로 전달되었으며 식부장치의 최대 및 최소 주간거리는 각각 428.97mm, 261.20mm로 나타났다.

본 연구에서는 국내에서 주로 사용되는 롤러식 양파 파종기의 작동 특성을 분석하였다. 롤러식 양파 파종기의 주요 구성요소 및 전체 작동 메커니즘을 분석하였다. 또한, 동력전달경로를 분석하여 주요 성능인자인 포트의 이동속도와 롤러의 회전속도를 파악하였으며 계측을 통하여 검증하였다. 롤러식 양 파 파종기의 주요부에 대한 3D모델링 및 시뮬레이션을 수행하였으며 이를 바탕으로 롤러에 의한 상토 의 압축정도를 파악하였다. 본 연구를 통해 파악한 포트트레이의 이동속도는 7.49×10-2m/s이며 4개 의 롤러의 회전속도는 모두 22.13rpm인 것으로 나타났다. 롤러 돌기에 의한 상토 압축 정도는 약 9.8×10-3m인 것으로 나타났다. 롤러식 양파 파종기의 주요 성능 파라미터는 롤러 돌기 형상, 포트트레 이 및 롤러 속도, 배종드럼의 표면마찰계수 및 구멍크기/형상인 것으로 판단되며 향후 연구로써 시뮬레 이션 및 시험을 통한 파라미터의 최적화가 필요하다.

The experimental study for an operational characteristics and performance of the sodium heat pipe were carried out. For an experiment, the heat pipe which is 1000mm length and 25.4mm diameter of stainless steel container with 50 mesh of screen wick using sodium as a working fluid is manufactured and tested as functions of heat flow rate, inclined angle and operating temperature. The test results are as follows. During the start-up, frontal start up was observed because of the vapor density increasing as increased the hot zone. Also, the heat pipe showed uniform temperature over than 420℃ of the operating temperature. The average heat transfer coefficient increased as the heat flux and the vapor temperature increase, and the range of the total thermal resistance was 0.075～0.04℃/W at the 12～53.55kW/m2 of heat flux and 500～750℃ of operating temperature. The maximum heat flow rate was 750W at the 10 degree of top heating mode.

코로나방전플라즈마제트(CDPJ) 생성장치를 제작하여 조업특성을 조사하고 비가열살균기술로서의 활용가능성을 탐색하고자 E. coli를 대상으로 살균성능을 조사하였다. CDPJ장치는 전력공급장치, 변압기, 전극, 송풍기, 시료처리부 등 다섯 부분으로 구성하였다. 전압 10.0-20.0 kV의 직류전기를 10.0-45.0 kHz 구형파 펄스형태로 텅스텐리드 전극에 투입함으로써 코로나방전 플라즈마를 생성하고 동시에 전극사이로 강한 공기를 주입함으로써 하부방향으로 토출하는 플라즈마제트를 생성하였다. CDPJ 처리는 플라즈마 토출구 하부에 처리대상 물체를 위치하고 일정시간 처리하는 방식으로 시행하였다. 주파수를 높일수록 다량의 전류가 유입되었고, 비례하여 전력소비량도 증가하였다. 플라즈마 생성을 위한 임계전류는 1.0 A, 임계주파수는 32.5 kHz이었으며, 1.5 A 이상 40.0 kHz 이상에서 안정적인 플라즈마제트가 생성되었다. 플라즈마제트의 길이는 전류에 따라 증가하였고, 2분 이하 처리 시 대상물체의 표면온도 상승은 25oC를 하회하였다. E. coli 살균력은 전류세기에 비례하여 증가하였고, 전류 1.5 A에서 1분간 CDPJ처리에 의해 4.5 log 이상의 살균효과를 보였으며, 살균패턴은 2단계 1차 반응으로 확인되었다.

The loop thermosyphon has been designed and tested for cooling several hundreds watt of heat. This cooling system is consisted of copper block, condenser which is fabricated with tubes and fins and transport lines. In this research, operational characteristics and limitation of the loop thermosyphon were investigated as a function of fill charge ratio, thermal load, vapor temperature and effective head. The experimental results shows that the heat transfer limitation is dominated by vapor temperature and effective head. Also, the correlation for the heat transfer limitation is presented and showed good agreement. The evaporating heat transfer coefficient is affected by vapor temperature and heat flux, but the fill charge ratio and liquid head are minor factor.

A heat pipe heat sink which is possible to frozen start up at the lower than -20℃ by using a VCHP was designed, manufactured and tested. The VCHP uses water and nitrogen gas as the working fluid and non-condensable gas. The test results showed that the VCHP heat sink started up successfully at the range of -20 to -30℃ of the ambient temperature and 1000 to 2600W of the heat flow rate. The thermal resistance of the VCHP heat sink decreased as increased the heat flow rate and the ambient temperature since the active zone of VCHP increased.

The operational characteristics of a VCHP in the various operation conditions were investigated. A water heat pipe including nitrogen gas as a non-condensable gas was designed and manufactured using a copper tube with 12.7㎜ diameter and 480㎜ length. Experimental data showed that the length of non-active zone mostly depend on the temperature of the vapor and the non-condensable gas. And the heat flow rate was negligible parameter at the same vapor temperature in the range of the experiment. As the vapor temperature increase and the non-condensable gas temperature decrease, the non active zone was increased. The calculated data by using the flat front model and the experimental results showed same tendency.

The trends in building construction these days are moving towards having better work spaces and greater suitability for the use of information technology. Therefore people can work in a more relaxed delightful and pleasant environment. Accident such as like fire could cause the mass destruction of human beings. This paper aims to evaluate the path of the spread of a fire and the suitability of fire fighting appliances for maximum egress time. General advanced phase of compartment. Aswell, we analyzed and verified the path of the flame in compartment fires. Also we conducted an analysis of the adaptation of sprinkler systems concerned with sprinkler RTI. Moreover those evaluation is made more earlier by the development and use of computer simulation program and rapid progress to apply PBFD (Performance Based Fire Design).

The objectives of this study were to analyze customer satisfaction by operational characteristics in business & industry foodservice operated by contracted foodservice management company. The instruments were developed by reviewing literatures on customer satisfaction and by intervewing with managers, employers and customers. A total of 1000 questionnaires were hand delivered at the ten contracted foodservice operations by designated coordinators. A total of 833 questionnaires were usable; resulting in an 83.3% response rate. Statistical data analysis was completed using the SAS 6.04 for description, T-test, ANOVA. Overall customer satisfaction score for office building foodservice was significantly higher than those for manufacturing company foodservice. As for the type of management contracts, overall customer satisfaction score for management fee contracts was significantly higher than those for profit and loss contracts. With regard to payment method, overall customer satisfaction score for meal card was higher than those for POS system. Concerning the categories of service, overall customer satisfaction for combo-tray service was higher than those for cafeteria-tray service and partially self-service. As for types of menus, the score of overall customer satisfaction was not significantly different between cafeteria menu and double choice menu.

The purpose of this study was to evaluate the operational characteristics of wastewater treatment using Sequencing Batch Reactor (SBR) with Aerobic Granular Sludge (AGS) separator in the pilot plant. Pilot plant experiments were conducted using SBR with AGS separator and pollution removal efficiencies were evaluated based on the operational condition and surface properties of AGS. The results of the operation on water quality of the effluent showed that the average concentration of total organic carbon, suspended solids, nitrogen, and phosphorus was 6.89 mg/L, 7.33 mg/L, 7.33 mg/L, and 0.2 mg/L, respectively. All these concentrations complied the effluent standard in Korea. The concentration of mixed liquor suspended solid (MLSS) fluctuated, but the AGS/MLSS ratio was constant at 86.5±1.3%. Although the AGS/MLSS ratio was constant, sludge volume index improved. These results suggested that the particle discharged fine sludge and increased the AGS praticle size in the AGS. Optical microscopy revealed the presence of dense AGS at the end of the operation, and particles of > 0.6 mm were found. Compared to those of belt-type AGS separator, the required area and power consumption of the hydrocyclone-type AGS separator were reduced by 27.5% and 83.8%, respectively.

The comprehensive rural village development projects (CRVDP) have been carried out as the core one of the rural development schemes in Korea since 2004. CRVDP included the various rural experience programs to increase rural income and in order to promote rural community development in the project area. This study analyzed the operating management conditions, types and characteristics of the rural experience programs targeting the 168 CRVDPs have been completed so that the recommendations and lessons which were found the usefulness, challenges and improvements to the CRVDP can be provided to be better the same kinds of rural development projects. We identified the relationships between performances such as increasing village income and utilization of rural amenity resources to the CRVDP and operational management types of the rural experience programs as well. Employing principle component analysis and cluster analysis technique, this study found 5 clusters of rural experience programs among 168 CRVDPs. The results of analysis of variance indicated that there were significant the mean differences between clusters such as the utilization of rural amenity resources(0.01), income of rural experience programs(0.1). According to the result of the Chi-squire test, there was very significant differences between internet homepage operation and clusters(0.01). Finally, the analysis of covariance about the income of rural experience programs showed that there were significant the mean differences between clusters(0.05).