The purpose of this study was to develop a 3D mesh-type impact protection pad with excellent motion adaptability and functionality by applying 3D printing technology. The hexagonal 3D mesh, which constitutes the basic structure of the pad, comprises two types: small and large. The bridge connecting the basic units was designed as the I-type, V-type, IV-type, and VV-type. After evaluating the characteristics of the bridge, it was found that the V-type bridge had the highest flexibility and tensile elongation. The hip joint pad and knee pad were completed by combining the hexagonal 3D mesh structure with the optimal bridge design. The impact protection pad was printed using a fused deposition modeling-type 3D printer with a filament made of thermoplastic polyurethane material, and the protection pad’s performance was evaluated. When an impact force of approximately 6,500N was applied to the pad, the force attenuation percentage was 78%, and when an impact force of approximately 8,000N was applied, the force attenuation percentage was 75%. Through these results, it was confirmed that the 3D-printed impact protection pad with a hexagonal 3D mesh structure connected by a V-shaped bridge developed in this study can adapt to changes in the body surface according to movement and provides excellent impact protection performance.

Cryptocurrency transactions are subject to private law regulations. This article reviews the legal nature of cryptocurrency from the perspective of general civil law theory. The undeniable nature of property in cryptocurrency has led to an increased demand for judicial systems to effectively operate in regards to cryptocurrency. The right to cryptocurrency cannot be regarded as intellectual property rights. Cryptocurrency cannot also be regarded as a bond, as it is merely units of information listed in the distributed ledger with no counterparty. Cryptocurrency can be understood as an “things” under civil law because there is a possibility of management through an electronic wallet private key and also independence through a distributed ledger. Among the requirements of an things, the requirement of ‘corporeal things’ or ‘natural force’ can be flexibly interpreted in regards of transactions between related parties. On the other hand, cryptocurrency cannot be regarded as “money” among things. Cryptocurrency cannot function as a “measure of value”, which is a fundamental function of money, due to its inherent nature of volatility and price differences between its exchanges. As a result, the legal nature of cryptocurrency can be recognized as a things, not money, through which current existing judicial systems such as compulsory execution law and bankruptcy law becomes able to operate in regards to cryptocurrency, ultimately promoting legal predictability. However, legislation on cryptocurrency should ultimately be completed through legislation, not interpretation. This requires further in-depth discussion in academic and practice sectors.

본 연구에서는 국내 밭작물 재배농가에서 주로 사용되는 캠방식 채소 정식기를 대상으로 작동특성 및 식부장치 작동 메커니즘 분석을 수행하였다. 정식기의 주요 구성요소 및 동력전달경로를 파악하였으며, 주행속도 및 주간거리 단수 변화에 따른 최대 및 최소 작동주기를 도출하였다. 이를 바탕으로 3D모델링 및 시뮬레이션을 수행하여 식부호퍼 극하단점의 궤적 및 조건별 주간거리를 도출하였으며 필드시험을 통해 실제 주간거리와 비교 검증하였다. 주요 결과로써, 식부장치는 13개의 링크와 17개의 회전 조인트 및 1개의 하프 조인트로 구성된 1 자유도의 기구이며, 각 부분들은 캠과 링크장치들의 복합구조를 갖는다. 식부장치 요소들의 연속적이고 반복적인 운동에 의해 식부호퍼는 지면과 연직인 자세를 유지하며 묘를 안정적으로 정식한다. 동력은 엔진과 변속기를 통해 주행부 및 식부장치로 전달되었으며 식부 장치의 최대 및 최소 주간거리는 각각 약 900 mm 및 350 mm이다.

본 연구는 감마선을 이용한 육종 차조기 추출물을 통해 항염증 효능을 평가하고자 하였다. RAW 264.7 세포에서 MTT를 통해 세포 생존율을 평가하였으며, LPS로 유도한 RAW 264.7 세포에서 ROS, NO, 염증성 사이토카인, NF-κB, COX-2 등을 ELISA, Luminex 및 PCR로 측정하였다. 그 결과, 육종 차조기 추출물은 25 ㎍/㎖ 이하에서 세포독성이 없었으며, LPS로 유도된 RAW 264.7 세포에 서 ROS, NO, 사이토카인(IL-1β, IL-6, TNF-α)의 생성을 억제하였다. 또한, NF-κB, COX-2의 발현을 감소시켜 육종 차조기 추출물은 뛰어난 항염증 효과를 보였다. 이와 같은 결과는 염증 매개체로 인해 발생하는 질환을 개선하기 위한 새로운 건강식품 및 치료제의 원료로 개발될 수 있다.

본 연구에서는 국내에서 주로 사용되는 채소 정식기를 대상으로 전체적인 작동 특성을 분석하였다. 식부장치 거동에 영향을 주는 주요 구성요소 및 동력전달경로를 파악하였으며, 식부장치의 링크 구조를 기구적으로 분석하고 3D모델링 및 시뮬레이션을 수행하였다. 이를 바탕으로 식부호퍼 극하단점의 궤적을 분석하였다. 또한 엔진회전속도 및 식부변속단수 변화에 따른 주간거리를 도출하고 필드시험을 통해 검증하였다. 주요 결과로써, 식부장치는 10개의 링크와 13개의 회전 조인트로 구성된 1 자유도의 기구이며 각 부분들은 4절 링크식으로 구성되어 있었다. 링크장치의 거동에 의해 식부호퍼는 일정한 자세를 유지하면서 연직 방향으로 묘를 심어준다. 동력은 엔진을 통해 주행부 및 식부로 전달되었으며 식부장치의 최대 및 최소 주간거리는 각각 428.97mm, 261.20mm로 나타났다.

PURPOSES : The performance of pavements is decreased by reduced bearing capacity, deterioration, and distress due to complex loading conditions such as traffic and environmental loads. Therefore, the proper maintenance of pavements must be performed, and accurate evaluation of pavement conditions is essential. In order to improve the accuracy of the heavy weight deflectometer (HWD), which is a nondestructive evaluation method, the correlation between HWD test results and temperature factors were analyzed in this study. METHODS : The HWD test was conducted five times for one day on airport concrete pavement, and the ambient temperature, surface temperature, and slab internal temperature were collected. Since the slab internal temperature was nonlinear, it was replaced by the equivalent linear temperature difference (ELTD). The correlation between the HWD test results and each temperature factor was analyzed by the coefficient of correlation and coefficient of determination. RESULTSAND: The deflection of the slab center, mid edge, and corner, and impulse stiffness modulus (ISM) showed significantly high correlation with each temperature factor, especially the ELTD. However, the load transfer Efficiency (LTE) had very low correlation with the temperature factors. CONCLUSIONS : It is necessary to analyze the effect of aggregate interlocking on LTE according to the overall temperature changes in slabs by conducting seasonal HWD tests. It is also necessary to confirm the effect of seasonal temperature changes on deflection and ISM.

우리나라 남해안의 대표적인 패류양식해역 중에 하나인 고성만 주변 표층 퇴적물 중 유기물과 중금속의 분포 및 오염현황을 이해하기 위해 입도와 총유기탄소(TOC), 총질소(TN), 중금속 9종(As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Zn)에 대해 조사하였다. 고성만 주변 퇴적 물은 세립질의 점토(clay)와 니(mud)로 이루어져 있었다. 유기물과 중금속은 만의 입구쪽에서 안쪽으로 갈수록 상대적으로 높은 농도를 보 였다. 특히, 퇴적물중 유기물 및 중금속의 분포와 C/N 비(5-10)를 고려하였을 때, 고성만 퇴적물 중 유기물은 해역 자체 내 생물체에 의해 생성된 해양기원성 유기물의 영향을 크게 받고, 중금속은 만 주변 혹은 만내 산재해 있는 인위적인 오염원의 영향을 크게 받고 있는 것으 로 파악되었다. 4 가지 퇴적물 오염평가 방법을 이용하여 고성만의 중금속 오염현황을 살펴본 결과, 고성만 퇴적물은 전 해역에 걸쳐 중 금속에 대하여 약간 오염된 상태였으며, 만의 북쪽과 북동쪽의 일부 해역은 퇴적물의 중금속 오염도가 높아 퇴적물에 서식하는 저서생물 에 큰 위해를 줄 수 있는 상태인 것으로 나타났다. 따라서, 고성만 주변 퇴적환경 개선을 위한 체계적인 관리계획의 수립과 함께 지속적 인 양식활동 및 양식생물의 안전성 확보를 위한 오염물질에 대한 집중적인 모니터링 연구가 병행되어져야 한다.

LC-MS/MS를 이용하여 신속하고 정밀한 카벤다짐 분석법을 연구하였다. 농산물 중 카벤다짐은 acetonitrile로 추 출한 후 SPE cartridge을 이용하여 전처리를 수행하였으며, 최소 검출한계 및 정량한계는 각각 0.001과 0.004 mg/kg 이었다. 농산물에 각각 1.0 mg/kg 및 0.02 mg/kg 농도의 카벤다짐을 첨가하여 분석 시 회수율과 정밀성은 각각 상추 가 84.9%, 1.0% 및 87.8%, 3.8% 얼갈이배추가 83.4%, 1.5% 및 86.8%, 2.7% 양배추가 86.4%, 2.0% 및 77.3%, 1.5% 근대가 83.3%, 0.2% 및 86.8%, 2.0 % 이었으며, 콩 나물은 85.9%, 3.0% 및 90.1%, 1.3%, 그리고 숙주나물이 83.3%, 2.0% 및 85.9%, 1.9% 로 조사되었다. 본 연구의 시험법은 식품공전의 다성분분석법에 비해 신속하고 정밀 한 분석법으로 농산물에 대한 카벤다짐 분석에 적합한 것으로 조사되었다.

The objective of this study was to efficiently produce forage crop seed of spring oat (Avena sativa L., cultivar High Speed) in Gyeongbuk area. Forage crop oats (130 kg/ha) were sown with a randomized block design. They were sown in triplicates in 2015 and 2016 using basal fertilizer of 70 kg N, 74 kg P, and 39 kg K/ha. Agronomic traits and seed production of oats were investigated to determine the influence of seeding dates (February 28/29th, March 10th, and March 20th). Heading, flowering, and maturing dates of these oats sown on February 28/29th and March 10th were almost close to each other with 1-2 days of difference for all test plots. For oats sown on the last day (28/29) of Feb., plant heights (111.6-122.6 cm) were significantly longer than those sown in March each year. In addition, panicle number (416.7 per m2) and panicle length (17.3 cm) of oats sown on the last day of February were also significantly (p < 0.05) larger than those of oats sown in March in 2015 and 2016, respectively. Based on these results, it is recommended to sow these oats on the last day of February to have better agronomic traits in terms of plant height, stem length, panicle length, and panicle number per m2. Grain numbers (56.3 and 63.3) and kernel weights (1.72 and 2.00 g) per spike in plots of oats sown on the last day of February were also significantly (p < 0.05) larger than those of oats in other plots in 2016 and in the average of 2015~2016, respectively. The highest grain yield (6,243 kg/ha) was obtained when oats were sown on the last day of February. Feed value of harvested oats was good in terms of proximate compositions including fiber contents and TDN contents. In conclusion, sowing on the last day of February is the most effective way to increase seed production of spring oats in Gyeongbuk area of Korea.

A discourse on the Independence Hall of Korea, a representative cultural project of the 1980s, has been understood as a repetition of the traditional debate of the 1960s. It was considered as a petrified propaganda aimed at ensuring the fragile legitimacy of the military regime, and the architect as a sympathizer. Even if all these facts are true, it does not give any explanation for the architecture. Scrutinizing the building process and the change of discourse in the Independence Hall of Korea, this paper tries to explore a section of contemporary Korean architecture in the 1980s. The architect who designed the Independence Hall of Korea is Kim Kiwoong, however, it was Kim Won who took charge of overall scheme for it. Kim Won replaced the role of a technocrat in the 1960s, who deprived architects of his autonomy. Against this backdrop, Kim Kiwoong attempted to explain his own building via various concept like postmodernism, which gave him very proper context. But, later, he appropriated words like void and madang. These derived from some architectural historian’s researches in 1970s, and were to predict the architecture of the 1990s.