Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

The function failure of present major facilities is likely to lead to failure of related systems and/or whole facilities, increasing the necessity for protection of infrastructures, main structures, and major industrial facilities. In addition, safe and efficient management for urban infrastructure (waterworks and sewerage facilities, electricity, telecommunications, roads, etc) installed in the basement or on large cities grounds at various public areas is required. Recently in response to this demand, efforts for vitalizing asset management are being made such as enacting related laws and developing asset management system in the U.S., Australia, Europe and other advanced countries with the concept for a new maintenance. In our county, identifying maintenance system problems such as aging and rapid increasing of existing infrastructures and decision-making about updating maintenance is required for systematic and organizational maintenance. In this study, by comparing and observing the LOS(Level of Service) of each countries’ waterworks and risk-based LOS, we suggest the direction of future urban water infrastructure management systems for more effective management.

This study examines the contribution level of greenhouse gas(GHG) emission reduction and installation costs of renewable energy facilities. The GHG emission forecasts and industrial structures in the 16 regions of Korea are then analyzed to identify the proper supply of renewable energy sources for each region. The results show that water power is the most effective and efficient renewable energy source to reduce GHG emissions, followed by sunlight, wind power, geothermal heat, and solar heat, respectively. The 16 regions are then categorized into 4 groups based on their GHG emission forecast and industrial structure: high emission and manufacturing group, low emission and manufacturing group, low emission and service group, and high emission and service group. The proper supply of renewable energy sources for each group is then determined based on the contribution level and cost efficiency of GHG emission reduction.

The national Logistics Information system has been rapidly developed on account of the dramatic improvements in the military’s logistics support system and supply support system, making a transition from manual work system to computerized work system. Supply level, however, does not reflect these changes in the overall logistics environment and still retains the state it was in the 1970s. This research uses the accumulated data from the equipment․maintenance information system developed in the year 2009 to analyze RWT( Requisition Wait Time) and CWT (Customer Wait Time). The analysis estimated the realistic transportation and ordering time and led to the conclusion that the differentiated ASL operation system that considers demand level should be adopted instead of the uniform ASL employment system.

Sulphur deficiency has become widespread over the past several decades in most of the agricultural area. Oilseed rape (Brassica napus L.) is a very sensitive to S limitation which is becoming reduction of quality and productivity of forage. Few studies have assessed the sulphur mobilization in the source-sink relationship, very little is known about the regulatory mechanism in interaction between sulphur and nitrogen during the short-term sulphur deficiency. In this study, therefore, amount of sulphur and nitrogen incorporated into amino acids and proteins as affected by different S-supplied level (Control: 1 mM SO4 2 , S-deficiency: 0.1 mM SO4 2 , and S-deprivation: 0 mM SO4 2 ) were examined. The amount of sulphur in sulphate (S-sulphate) was significantly decreased by 25.8% in S-deprivation condition, compare to control, but not nitrogen in nitrate (N-nitrate). The markedly increase of sulphur and nitrogen incorporated amino acids (S-amino acids and N-amino acids) was observed in both S-deficiency and S-deprivation treatments. The amount of nitrogen incorporated proteins (N-protein) was strongly decreased as sulphur availability while the amount of sulphur incorporated into proteins (S-protein) was not affected. A highly significant (p<0.001) relationship between S-sulphate and S-amino acid was observed whereas the increase of N-amino acids is closely associated with decrease of N-proteins. These data indicate that increase of sulphur and nitrogen incorporated into amino acids was from different nitrogen and sulphur metabolites, respectively.

This paper studies the effect of information quality level and customer demand on performance measures in a supply chain. The information quality level compares 2 types, the information levels of a customer demand and a lead time. The customer demand proc

본 연구는 공급자(supplier), 소매상(retailer) 그리고 고객(customer)으로 구성된 2 단계 공급사슬에서 소매상의 관점에서 소매상의 최적 재고정책 결정에 관한 문제를 다루었다. 공급자는 수요 증대를 목적으로 소매상의 주문량에 따라 다단계로 일정기간동안 제품 판매대금에 대한 지불 연기(외상)를 허용하고, 고객의 수요는 소매상의 제품 재고량에 영향을 받는다는 가정 하에 재고 모형을 설계하였다. 모형 분석을 통하여 소매상의 이익을 최대화하

유채 품종에서 황 공급수준이 황산염 흡수 및 동화에 미치는 영향을 구명하고자 어린 잎과 성엽조직에서 ATP sulfurylase (ATPs), SO42－ 흡수, 글루타치온 함량을 분석하였다. 본 실험에서 10가지 유채 품종들 (Mosa, Capitol, Saturnin, Akela, Pollen, Mokpo, Youngsan, Tamra Colosse 그리고 Naehan)은황 공급수준에 따라 몇 가지 황산염 흡수와 동화 능력이 다르게 나타났다. 황 결핍 조건에서 모든 품종의 ATP sulfurylase (ATPs) 활력은 늙은 잎에 비해 어린 잎에서 높게 나타났으며, 글루타치온 함량은황 공급수준이 감소함에 따라 어린 잎에서 많이 증가하였다. 이러한 결과들은 유채 품종별 황 결핍조건에서 황을 이용하는 능력이 다르다는 것을 잘 보여주었다.

유채 (Brassica napus L.)에서 황 공급수준에 따른 글루타치온 함량의 변화가 황 흡수 및 동화관련 효소 활력에 미치는 영향을 규명하고자, 농도를 4수준 (0, 0.1, 1.0 및 2.0 mM)으로 25시간 처리 한 후 식물조직 내 글루타치온 함량을 측정하고, 흡수, ATP sulfurylase (ATPS) 및 O-acteylserine (thiol) lyase (OASTL) 효소 활력과의 상관관계를 분석하였다. 흡수는 황 공급수준에 따라 평

In a real-life supply chain environment, demand forecasting is usually represented by probabilistic distributions due to the uncertainty inherent in customer demands. However, the customer demand used for an actual supply chain planning is a single deterministic value for each of periods. In this paper we study the choice of single demand value among of the given customer demand distribution for a period to be used in the supply chain planning. This paper considers distributed multi-echelon supply chain and the objective function of this paper is to minimize the total costs, that is the sum of holding and backorder costs over the distribution network under the service level constraint, by using demand selection scheme. Some useful findings are derived from various simulation-based experiments.

본 연구는 공급자(supplier), 중간분배자(retailer/distributor) 그리고 고객(customer)으로 구성된 2 단계 공급사슬을 대상으로 공급자가 수요 증대를 목적으로 중간분배자에게 일정기간 동안 제품대금에 대한 지불 연기를 허용한다는 가정 하에 중간분배자의 최적 재고정책 결정을 위한 재고 모형을 다루었다. 소비성 상품의 경우, 고객의 수요는 일반적으로 상품 진열대에 진열되어있는 상품의 재고량에 많은 영향을 받는 것으로 알려져 있다.

In reality, distribution planning for a supply chain is established using a certain probabilistic distribution estimated by forecasting. However, in general, the demands used for an actual distribution planning are of deterministic value, a single value for each of periods. Because of this reason the final result of a planning has to be a single value for each period. Unfortunately, it is very difficult to estimate a single value due to the inherent uncertainty in the probabilistic distribution of customer demand. The issue addressed in this paper is the selection of single demand value among of the distributed demand estimations for a period to be used in the distribution planning. This paper proposes an efficient demand selection scheme for minimizing total inventory costs while satisfying target service level under the various experimental conditions.

질산태 질소의 공급수준이 알팔파의 영양생장기 동안의 질소동화와 성장 및 재생기간 동안의 뿌리조직내 전분과 질소 축적에 미치는 영향을 규명하고자 0.2, 1.0 및 3.0 mM KN 하에서 10주 동안의 영양생장 후 건물 및 질소 화합물의 식물조직내의 분포를 분석하고, 24일간 1차 및 2차 재생을 각각 시킨 후 뿌리조직에 축적된 전분과 질소 함량을 분석하였다. 10간의 영양생장 후 건물과 질소화합물의 함량을 1.0 mM 처리구를 기준으로 비교한 결과,

페레니얼 라이그라스에서 질소의 공급형태 ( or ) 및 수준 (0.2, 1.0 and 6.0mM)에 따른 질소동화와 탄수화물 대사산물에 미치는 영향을 알아보기 위해 nitrate, nitrate reductase, sugar 농도와 Fructan 농도를 조사하였다. 공급구에서 잎의 생체량은 약간 증가하다가 같은 수준으로 유지되는 반면 공급구에서는 농도가 증가함에 따라 처음수준에 비해 약 25%에서 30% 증가하였다. 공급구에서 Nitrate 농도는 Ni

The main objective of this research is to develop a model to select the optimal input service level for a distribution center-multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service levels for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

Eight-week old perennial ryegrass (Lolium perenne L. cv. Reveille) plants were exposed to different NO3-concentrations or osmotic stress with NaCI. Previously labeled "N was chased during 14 days of non-labeled'NO3 feeding in order to investigate NO3 meta

The main purpose of this paper is to explore how green supply chain management (GSCM) and its evaluative factors have affected green supply chain management practice and performance in industrial zone. This study proposes a structural equation model of the relationships among four factors: internal awareness (IA); suppliers’ pressure (SP); customers’ awareness (CA); and regulations pressure (RP) and their effect on GSCM practice (PA) and GSCM performance (PE). We used a survey questionnaire to elicit perceptions/opinions about GSCM from three level of managers of 322 companies in Bac Ninh Province’s industrial zones, Vietnam. PLS-SEM 3.0 software was applied to analyze and verify the gathered data, and the proposed hypothesis model. The results of path analysis show that internal awareness and customers’ awareness are positively related to the GSCM practice and GSCM performance. However, suppliers’ pressure and regulations pressure just impacted on GSCM practice. As a result, the testing of the relationship between GSCM practice and GSCM performance has been verified and supported. The findings of this study can help manager of companies in industrial zone understand the structure of GSCM, associate with the green supply chain management practice and green supply chain management performance, and be successful in green management organizations.