In the present work, multi-walled carbon nanotubes (MWCNT) were anchored with the assistance of vinyl ester resin (VE) on the carbon fiber surfaces of conventional carbon fabrics (CCF) and semi-spread carbon fabrics (SSCF) having different areal density, ply thickness, and crimp number, respectively. Here, MWCNT anchoring means that MWCNT were physically attached on the individual carbon fiber surfaces of each fabric by coating with dilute VE and then by thermally curing it. The MWCNT anchoring effect on the interlaminar shear strength (ILSS) of CCF/VE and SSCF/VE composites was investigated. MWCNT were also simply applied (without physical attachment) to the carbon fiber surfaces of CCF and SSCF for comparison, respectively. It was found that SSCF/VE composites exhibited the ILSS higher than CCF/VE composites, regardless of simple-applying or anchoring of MWCNT, increasing the ILSS with the MWCNT concentration. It was noted that MWCNT anchoring was effective to improve not only the interlaminar adhesion but also the interfacial bonding between the carbon fiber and the matrix due to the formation of MWCNT bridges between the individual carbon fibers of SSCF, indicating that the MWCNT anchoring effect was more pronounced with SSCF than with CCF. The result of the interlaminar property was well supported by the fiber and composite fracture topography.

AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a highquality additive manufacturing product.

계면동전위 특성평가는 분리막의 막오염 개선연구와 분리막의 표면전하 분석을 통한 고분자의 개질 확인 및 치환기 확인에 대한 연구로 활발히 진행되고 있다. 제타전위 (zeta potential)란 전기역학적 현상으로 발생하는 전위차를 정량화 한 값을 측정하는 것을 말한다. 이러한 제타전위를 측정하기 위해서는 전기영동 (electrophoresis), 전기삼투 (eletrosmosis), 유동전위 (streaming potential)를 측정하는 예가 있다. 그 중 평막은 유동전위 측정을 하는 것에 있어 가장 높은 재현성을 보인다. 따라서, 본 연구에서는 SEBS (polystyrene-ethylenebutylene-styrene) 고분자 개질을 통해 아민화된 SEBS 평막형 분리막을 제막하고, 제막한 아민화된 SEBS 고분자 분리막의 계면동전위 측정을 통해 계면 유동전위를 측정하여 결과를 분석하였다.

In this study, tapered double cantilever beam bonded with aluminum foam composite is modelled and analyzed by finite element analysis. The bonding strength on Mode II of this structure is evaluated and investigated. In cases of inclined angles of 6°, 8° and 10°, maximum equivalent stresses occur 1.29, 1.59 and 2.6 MPa respectively at the range of forced displacement of 5 to 6 mm. And maximum reaction forces become 186, 208 and 235 N individually at this range of displacement in these cases. By the analysis result on 3 kinds of models, the maximum reaction load increases as angle of inclination of model increases. And the elapsed time to approach the maximum load and the time to disappear away become shorter. This study result can be applied into the real composite structure with aluminum foam in case that the surface bonded with adhesive is inclined. This fracture behavior can also be investigated and the impact property can be examined

This study examined the effect of current density on the surface morphology and physical properties of copper plated on a polyimide (PI) film. The morphology, crystal structure, and electric characteristics of the electrodeposited copper foil were examined by scanning electron microscopy, X-ray diffraction, and a four-point probe, respectively. The surface roughness, crystal growth orientation and resistivity was controlled using current density. Large particles were observed on the surface of the copper layer electroplated onto a current density of 25 mA/cm2. However, a uniform surface and lower resistivity were obtained with a current density of 10 mA/cm2. One of the important properties of FCCL is the flexibility of the copper foil. High flexibility of FCCL was obtained at a low current density rather than a high current density. Moreover, a reasonable current density is 20 mA/cm2 considering the productivity and mechanical properties of copper foil.

RTCVD법으로 증착된 다결정 Si1-xGex박막에서 Ge조성 증가에 따른 결정립크기변화가 표면거칠기 및 cluster크기에 미치는 영향에 대해 알아본결과, Ge조성 증가에 따라 결정립크기가 증가했으며 증가된 결정립에 의해 Cluster 크기와 표면거칠기값(RMS)들이 증가함을 알 수 있었다. 또한 증착된 다결정 Si1-xGex박막을 RF power와 온도변화에 따라 Ar/H2플라즈마를 이용한 수소화처리를 행하여, 수소화 효과와 표면거칠기값 그리고 비저항값 변화에 대해 조사하였다. 수소화처리 후 cluster크기와 표면거칠기값은 기판온도와 RF power 증가에따라 감소함을 알 수 있었으며 특히 기판온도 300˚C에서는 비저항값이 상당히 증가하였다.

Hydroxide법으로 α-주산산(stannic acid)을 만든후, 하고온도를 500˚C~1100˚C로 조정하여 일차입자(Crystallite)크기가 8-54nm인 SnO2 분말을 제작하였다. 분말의 입자(drystalite)클기에 따른 분말특성와 H2, CO가스(0.5v/o)에 대한 감응성 미치공기중에서의 저상변화특성에 미치는 영향을 조사하였다. 입자크기가 감소함에 따라, 분말의 FTIR 흡습특성은 증가하였으나, 격자상수는 일정하였다. 후막소자에서, H2가스에 대해 최대감도를 나타내는 온도와 공기중에서 최소저항을 나타내는 온도는 입자크기가 미세해짐에 따라 점차 낮아졌다. 최소저항점과 최대감도점의 온도저하를 산소흡착종의 활성화에너지의 감소라고 유추하였고, 이러한 에너지의 감소가 미세입자에 의한 감도향상요인 중의 한가지라고 제의하였다.

본 연구에서는 고경질 도막재로 PET 필름을 접합하는 시공방법에 있어서 PET 필름의 표면처리 조건 및 겹침이음 길이에 따른 접합특성 및 내구특성을 검토하였는데, 그 결과 무처리 보다 코로나 방전 처리에 의해 접촉각, 접합 인장강도, 벗김저항성이 개선되었다. 특히 시험체 E (코로나 방전+프라이머+강접접착제+폴리에스터 부직포)에서 가장 높은 것으로 나타났으며, 특히 겹침 이음길이 15mm 이상일 때 16주간 장기간 열화처리에도 안정적인 접합성능을 확보하는 것으로 나타나 방수재료로서 수밀성을 확보할 것으로 판단된다.

In this study, bonding property between the hardened concrete and sulfur polymer was evaluated by pull out test. The test results were shown that moisture condition on the concrete decreased the bonding strength between concrete and sulfur polymer.