Nanoparticles are commonly used to avoid the opaque white color of TiO2 based sunscreen. However, a dispersing agent is typically required because of the tendency of the nanoparticles (NPs) to agglomerate. Stearic acid is one kind of dispersing agent often used for sunscreen products. However, according to the MSDS data sheet on stearic acid, stearic acid is highly hazardous to aquatic life and causes irritation on human skin. To avoid this problem, in this study a safer organic dispersing agent extracted from Korean seaweed has been studied to disperse TiO2 nanoparticles, and further use as an active agent in sunscreen products. The presence of phytochemicals in seaweed extract, especially alginate, can disperse TiO2 nanoparticles and improve TiO2 dispersion properties. Results show that seaweed extract can improve the dispersion properties of TiO2 nanoparticles and sunscreen products. Reducing the agglomeration of TiO2 nanoparticles improves sunscreen properties, by making it less opaque white in color, and increasing UV protection value. It was also confirmed that adding seaweed extract into sunscreen products had no irritating effects on the human skin, making it more desirable for cosmetics application.

Decabromodiphenyl ether (BDE209) is a persistent aromatic compound widely associated with environmental pollutants. Given its persistence and possible bioaccumulation, exploring a feasible technique to eradicate BDE209 efficiently is critical for today’s environmentally sustainable societies. Herein, an advanced nanocomposite is elaborately constructed, in which a large number of titanium dioxide ( TiO2) nanoparticles are anchored uniformly on two-dimensional graphene oxide (GO) nanosheets ( TiO2/GO) via a modified Hummer’s method and subsequent solvothermal treatment to achieve efficient photocatalytic degradation BDE209. The obtained TiO2/ GO photocatalyst has excellent photocatalytic due to the intense coupling between conductive GO nanosheets and TiO2 nanoparticles. Under the optimal photocatalytic degradation test conditions, the degradation efficiency of BDE209 is more than 90%. In addition, this study also provides an efficient route for designing highly active catalytic materials.

Effect of sulfation processes on the physicochemical properties of ZrO2 and TiO2 nanoparticles were thoroughly investigated. SO4/ZrO2 and SO4/TiO2 catalysts were synthesized to identify the acidity character of each. The wet impregnation method of ZrO2 and TiO2 nanoparticles was employed using H2SO4 with various concentrations of 0.5, 0.75, and 1 M, followed by calcination at 400, 500, and 600 °C to obtain optimum conditions of the catalyst synthesis process. The highest total acidity was found when using 1 M SO4/ZrO2-500 and 1 M SO4/TiO2-500 catalysts, with total acidity values of 2.642 and 6.920 mmol/ g, respectively. Sulfation increases titania particles via agglomeration. In contrast, sulfation did not practically change the size of zirconia particles. The sulfation process causes color of both catalyst particles to brighten due to the presence of sulfate. There was a decrease in surface area and pore volume of catalysts after sulfation; the materials’ mesoporous structural properties were confirmed. The 1 M SO4/ZrO2 and 1 M SO4/TiO2 catalysts calcined at 500 °C are the best candidate heterogeneous acid catalysts synthesized in thus work.

In the present study, rutile phase titanium dioxide nanoparticles (R-TiO2 NPs) were prepared by hydrolysis of titanium tetrachloride in an aqueous solution followed by calcination at 900℃. The composition of R-TiO2 NPs was determined by the analysis of X-ray diffraction data, and the characteristic features of R-TiO2 NPs such as the surface functional group, particle size, shape, surface topography, and morphological behavior were analyzed by Fourier-transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy, transmission electron microscopy, dynamic light scattering, and zeta potential measurements. The average size of the prepared R-TiO2 NPs was 76 nm, the surface area was 19 m2/g, zeta potential was −20.8 mV, and average hydrodynamic diameter in dimethyl sulfoxide (DMSO)–H2O solution was 550 nm. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and morphological observations revealed that R-TiO2 NPs were cytocompatible with oral cancer cells, with no inhibition of cell growth and proliferation. This suggests the efficacy of R-TiO2 NPs for the aesthetic white pigmentation of teeth.

In this study, ultrasonic spray pyrolysis combined with salt-assisted decomposition, a process that adds sodium nitrate (NaNO3) into a titanium precursor solution, is used to synthesize nanosized titanium dioxide (TiO2) particles. The added NaNO3 prevents the agglomeration of the primary nanoparticles in the pyrolysis process. The nanoparticles are obtained after a washing process, removing NaNO3 and NaF from the secondary particles, which consist of the salts and TiO2 nanoparticles. The effects of pyrolysis temperature on the size, crystallographic characteristics, and bandgap energy of the synthesized nanoparticles are systematically investigated. The synthesized TiO2 nanoparticles have a size of approximately 2–10 nm a bandgap energy of 3.1–3.25 eV, depending on the synthetic temperature. These differences in properties affect the photocatalytic activities of the synthesized TiO2 nanoparticles.

양친성 PCZ-r-PEG 랜덤 공중합체를 기반으로 한 수열합성법을 통해 자가조립된 메조기공 이산화티타늄 마이크로 스피어를 합성하였다. 중합된 PCZ-r-PEG는 푸리에 변환 적외분광법(fourier transform infrared spectroscopy, FT-IR), 핵자기 공명(nuclear magnetic resonance, NMR), 젤 투과 크로마토그래피(gel permeation chromatography, GPC) 그리고 투과전자 현미경(transmission electron microscopy, TEM)을 통해 그 특성이 분석되었다. 다공성 이산화티타늄 입자는 PCZ-r-PEG, 글루코스(glucose), 물을 테트라히드로푸란(tetrahydrofuran, THF) 용액에 분산시킨 뒤 150°C, 12시간 동안 반응시켰다. 다공성 이산화티타늄 입자의 구조와 결정성 분석을 위해 주사전자현미경(scanning electron microscopy, SEM)과 엑스선 회절(X-ray diffraction, XRD)이 사용되었다.

Current synthesis processes for titanium dioxide (TiO2) nanoparticles require expensive precursors or templates as well as complex steps and long reaction times. In addition, these processes produce highly agglomerated nanoparticles. In this study, we demonstrate a simple and continuous approach to synthesize TiO2 nanoparticles by a salt-assisted ultrasonic spray pyrolysis method. We also investigate the effect of salt content in a precursor solution on the morphology and size of synthesized products. The synthesized TiO2 nanoparticles are systematically characterized by X-ray diffraction, transmission electron micrograph, and UV-Vis spectroscopy. These nanoparticles appear to have a single anatase phase and a uniform particle-size distribution with an average particle size of approximately 10 nm. By extrapolating the plots of the transformed Kubelka-Munk function versus the absorbed light energy, we determine that the energy band gap of the synthesized TiO2 nanoparticles is 3.25 eV

The coupling of two semiconducting materials is an efficient method to improve photocatalytic activity via the suppression of recombination of electron-hole pairs. In particular, the coupling between two different phases of TiO2, i.e., anatase and rutile, is particularly attractive for photocatalytic activity improvement of rutile TiO2 because these coupled TiO2 powders can retain the benefits of TiO2, one of the best photocatalysts. In this study, anatase TiO2 nanoparticles are synthesized and coupled on the surface of rutile TiO2 powders using a microemulsion method and heat treatment. Triton X-100, as a surfactant, is used to suppress the aggregation of anatase TiO2 nanoparticles and disperse anatase TiO2 nanoparticles uniformly on the surface of rutile TiO2 powders. Rutile TiO2 powders coupled with anatase TiO2 nanoparticles are successfully prepared. Additionally, we compare the photocatalytic activity of these rutile-anatase coupled TiO2 powders under ultraviolet (UV) light and demonstrate that the reason for the improvement of photocatalytic activity is microstructural.

본 연구에서는 CeO2 표면에 Ti(SO4)2의 가수 분해를 이용하여 TiO2를 성장시켜 코어-쉘 구조를 가지는 세라믹 나노입자를 합성 하였다. CeO2/TiO2 코어-쉘 합성에서는 CeO2:TiO2의 몰비, 반응 시간, 반응 온도, CeO2 슬러리 농도, Ti(SO4)2의 pH 조절을 통하여 코어-쉘 구조를 가지는 최적의 합성 조건을 찾았다. CeO2:TiO2의 최적의 몰비는 1:0.2~1.1, 최적의 반응 시간은 24 시간, 최적의 CeO2 슬러리 농도는 1%, 최적의 반응 온도는 50℃임을 알 수 있었다. NH4OH 수용액을 이용하여 Ti(SO4)2 의 pH를 1로 맞추어 CeO2 슬러리에 적하하면 10%의 농도를 가지는 CeO2 슬러리에서도 CeO2/TiO2 코어-쉘 나노 입자를 합성할 수 있었다. 80℃이상의 높은 온도에서 반응을 시키면 CeO2/TiO2 코어-쉘 구조가 아닌 독립된 TiO2 나노 입자를 형성함을 알 수 있었다. 최적의 반응 온도는 50℃로서 가장 좋은 구조의 CeO2/TiO2 코어-쉘이 합성되었다.

A novel nanocomposite LDPE film with UV protective properties was developed for active packaging applications. Initially, undoped and Mn-doped TiO2 nanoparticles (NPs) were synthesized by the sol-gel method and the resulting particles were characterized. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed an agglomerated nature and spherical morphology. X-ray diffraction (XRD) studies indicated that all products were crystalline and in the form of rutile. The reflectance spectrum of undoped TiO2 NPs demonstrated a characteristic sharp edge at 410 nm. Subsequently, nanocomposite (NC) LDPE samples were prepared with the NPs by solvent precipitation followed by film casting. The optical and thermal properties of the NC samples were investigated. Incremental increases in Mn concentration from 0.25 mol % to 1.00 mol % were associated with progressive decreases in light transmission in the UV region. The melting and maximum decomposition temperatures of all NCs were 107 and 442-449 °C, respectively. The UV protective LDPE-based NC films exhibited superior photostability. Absorption in the FTIR spectra at 1716 and 1734 cm-1 changed after 4-wk exposure to UV for all film samples as a consequence of photodegradation. Finally, the photooxidation of perilla oil was assessed as an example of a UV protective packaging application. After 12 days, protection with 1.00 mol% Mn-doped TiO2-LDPE was associated with a gradual increase in PV, while protection with TiO2-LDPE was associated with a significant increase and protection with the control treatment was associated with a dramatic increase in PV. Hence, a 1.00 mol% Mn-doped TiO2-LDPE NC showed promise for UV shielding packaging applications.

The morphology, crystal structure and size of aerosol nanoparticles generated by erosion of electrodes made of different materials (titanium, copper and aluminum) in a multi-spark discharge generator were investigated. The aerosol nanoparticle synthesis was carried out in air atmosphere at a capacitor stored energy of 6 J, a repetition rate of discharge of 0.5 Hz and a gas flow velocity of 5.4 m/s. The aerosol nanoparticles were generated in the form of oxides and had various morphologies: agglomerates of primary particles of TiO2 and Al2O3 or aggregates of primary particles of Cu2O. The average size of the primary nanoparticles ranged between 6.3 and 7.4 nm for the three substances studied. The average size of the agglomerates and aggregates varied in a wide interval from 24.6 nm for Cu2O to 46.1 nm for Al2O3.

용액-확산 메커니즘에 의해 결정되는 기존의 고분자에서와는 달리, 촉진수송은 투과도와 선택도를 동시에 향상시킬 수 있는 기술이다. 본 연구에서는 은 나노입자, 폴리비닐피롤리돈, 7,7,8,8-테트라시야노퀴노디메탄으로 구성된 촉진수송 올레핀 분리막에 있어서, 메조기공 티타늄산화물(m-TiO2)에 대한 영향을 연구하였다. 특히 메조기공 티타늄산화물은 폴리비닐클로라이 드-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체를 템플레이트로 하여 쉽고 대량 생산이 가능한 방법으로 제조하였다. 엑 스레이 회절분석에 따르면, 제조된 메조기공 티타늄산화물은 아나타제와 루타일 상의 혼합으로 구성되어 있으며, 결정의 크기가 약 16 nm 정도 되었다. 메조기공 티타늄산화물을 첨가하였을 때, 분리막의 확산도가 증가하여 혼합기체 투과도가 1.6에서 16 GPU로 증가하였고 선택도는 45에서 37로 약간 감소하였다. 메조기공 티타늄산화물이 첨가되지 않은 분리막은 장시간 성능이 유지되었으나, 메조기공 티타늄산화물이 첨가된 분리막의 경우 시간이 지남에 따라 투과도와 선택도가 감소하였다. 이는 티타늄 산화물과 은 사이의 화학적 상호작용으로 은 나노입자의 올레핀 운반체로써의 활성을 감소시키기 때문으로 사료된다.

In the present work, WO3 and WO3-TiO2 were prepared by the chemical deposition method. Structural variations, surface state and elemental compositions were investigated for preparation of WO3-TiO2 sonocatalyst. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and transmission electron microscopy (TEM) were employed for characterization of these new photocatalysts. A rhodamine B (Rh.B) solution under ultrasonic irradiation was used to determine the catalytic activity. Excellent catalytic degradation of an Rh.B solution was observed using the WO3-TiO2 composites under ultrasonic irradiation. Sonocatalytic degradation is a novel technology of treating wastewater. During the ultrasonic treatment of aqueous solutions sonoluminescence, cavitaties and "hot spot" occurred, leading to the dissociation of water molecules. In case of a WO3 coupled system, a semiconductor coupled with two components has a beneficial role in improving charge separation and enhancing TiO2 response to ultrasonic radiations. In case of the addition of WO3 as new matter, the excited electrons from the WO3 particles are quickly transferred to TiO2 particle, as the conduction band of WO3 is 0.74 eV which is -0.5 eV more than that of TiO2. This transfer of charge should enhance the oxidation of the adsorbed organic substrate. The result shows that the photocatalytic performance of TiO2 nanoparticles was improved by loading WO3.

SnO2-mixed and Sn-doped TiO2 nanoparticles were synthesized via a hydrothermal process. SnO2-mixed TiO2 nanoparticles prepared in a neutral condition consisted of anatase TiO2 nanoparticles(diamond shape, ~25 nm) and cassiterite SnO2 nanoparticles(spherical shape, ~10 nm). On the other hand, Sn-doped TiO2 nanoparticles obtained under a high acidic condition showed a crystalline phase corresponding to rutile TiO2. As the Sn content increased, the particle shape changed from rod-like(d~40 nm, 1~200 nm) to spherical(18 nm) with a decrease in the particle size. The peak shift in the XRD results and a change of the c-axis lattice parameter with the Sn content demonstrate that the TiO2 in the rutile phase was doped with Sn. The photocatalytic activity of the SnO2-mixed TiO2 nanoparticles dramatically increased and then decreased when the SnO2 content exceeded 4%. The increased photocatalytic activity is mainly attributed to the improved charge separation of the TiO2 nanoparticles with the SnO2. In the case of Sn-doped TiO2 nanoparticles, the photocatalytic activity increased slightly with the Sn content due most likely to the larger energy bandgap caused by Sn-doping and the decrease in the particle size. The SnO2-mixed TiO2 nanoparticles generally exhibited higher photocatalytic activity than the Sn-doped TiO2 nanoparticles. This was caused by the phase difference of TiO2.

Fe doped TiO2 nanoparticles were prepared under high temperature and pressure conditions by mixture of metal nitrate solution and TiO2 sol. Fe doped TiO2 particles were reacted in the temperature range of 170 to 200˚C for 6 h. The microstructure and phase of the synthesized Fe doped TiO2 nanoparticles were studied by SEM (FE-SEM), TEM, and XRD. Thermal properties of the synthesized Fe doped TiO2 nanoparticles were studied by TG-DTA analysis. TEM and X-ray diffraction pattern shows that the synthesized Fe doped TiO2 nanoparticles were crystalline. The average size and distribution of the synthesized Fe doped TiO2 nanoparticles were about 10 nm and narrow, respectively. The average size of the synthesized Fe doped TiO2 nanoparticles increased as the reaction temperature increased. The overall reduction in weight of Fe doped TiO2 nanoparticles was about 16% up to ~700˚C; water of crystallization was dehydrated at 271˚C. The transition of Fe doped TiO2 nanoparticle phase from anatase to rutile occurred at almost 561˚C. The amount of rutile phase of the synthesized Fe doped TiO2 nanoparticles increased with decreasing Fe concentration. The effects of synthesis parameters, such as the concentration of the starting solution and the reaction temperature, are discussed.

자연유기물을 처리하는 침지형 중공사막 정밀여과 시스템에서 TiO2 나노입자와 UV를 이용한 광촉매 반응을 적용 시 공기폭기, TiO2 농도, 용액의 pH 그리고 Ca+2의 존재가 자연유기물에 의한 파울링에 미치는 혼합영향을 관찰하였다. 실험결과, TiO2 나노입자 없이 단순 UV의 조사만으로 자연유기물에 의한 파울링은 약 40% 정도 감소시킬 수 있었다. 또한 UV의 조사 없이 TiO2 나노입자의 교반만으로 약 25%의 파울링 감소효과를 나타내었다. 공기폭기가 광촉매 반응에 미치는 영향을 확인해 본 결과 공기폭기를 적용해 주지 않은 경우와 비교했을시 공기폭기로 인한 자연유기물의 제거효율은 약 12% 정도 향상되었다. 이는 공기폭기로 인한 분리막 표면으로부터 자연유기물의 물리적인 역수송 보다는 산소공급으로 인해 광촉매 반응이 더욱 향상된 것으로 판단된다. 공기폭기 유량, TiO2 농도, 용액의 pH 영향정도를 관찰한 결과 공기폭기가 자연유기물 파울링 감소에 미치는 영향이 가장 낮은 것으로 나타났다. 반면, 용액의 pH 경우 낮은 pH (= 4.5)에서 파울링 감소에 미치는 영향이 가장 높은 것으로 관찰되었다. 또한 TiO2 나노입자 농도가 증가할 수록 파울링 감소효과도 증가하였으며 용액의 pH를 낮출수록 파울링 감소는 증가하였다. 이는 낮은 pH에서 서로 반대전하를 지닌 자연유기물과 TiO2 나노 입자간의 정전기적인 인력이 증가하여 TiO2 나노입자 표면에서 자연유기물의 광촉매분해능이 향상된 것으로 사료된다. 또한 자연유기물 중 Ca+2의 첨가는 상대적으로 높은 pH (= 10)에서 자연유기물과 TiO2 나노입자 사이 가교현상을 촉진시켜 Ca+2이 첨가되지 않은 경우와 비교시 높은 파울링 감소효과와 자연유기물의 분해효과를 달성시킬 수 있었다.

본 연구에서는 TiO2 나노입자로 표면침적된 polyethersulfone (PES) 정밀여과 분리막이 자연유기물로 인한 분리막 막힘현상(파울링)에 미치는 영향을 관찰하였다. TiO2 나노입자로 표면침적된 PES 정밀여과 분리막의 자연유기물 파울링 거동에 TiO2 나노입자의 결정구조와 용액의 pH 그리고 Ca+2이 미치는 영향을 관찰하였다. 연구결과, TiO2 나노입자로 표면 개질된 정밀여과 분리막은 자연유기물에 의한 파울링 현상을 현저하게 감소시킬 수 있음을 확인 할 수 있었다. 그러나 이와같은 현상은 TiO2 나노입자의 결정구조와 용액의 성상에 매우 의존하는 것으로 나타났다. 자연유기물 파울링의 감소는 결정구조가 상대적으로 불안정한 anatase TiO2 나노입자를 분리막에 표면침적 시, 용액 중 Ca+2이 존재하지 않을 때 상대적으로 높은 pH에서 효과적인 것으로 관찰되었다. 그러나 Ca+2의 첨가 시 이와 같은 효과는 높은 pH에서 더욱 증가할 수 있음을 확인할 수 있었다. 반면, 결정구조가 상대적으로 안정한 rutile TiO2 나노입자의 경우 자연유기물의 파울링 감소는 용액의 조성에 큰 영향을 받지 않는 것으로 나타났다.

In this study, the colloidal stability and sedimentation behavior of crystalline particles (300nm) in various organic solvents have been investigated by means of a backscattered light flux profile (Turbiscan). The backscattered light flux profiles revealed that the nanoparticles were readily sedimented in water, methyl alcohol, and ethyl alcohol due to a flocculation-induced particle growth, while a particle coalescence and a sedimentation of the nanoparticles were hardly observed in isopropyl alcohol. The migration velocities of the particle were measured as around 6.15/min, 12.53 m/min, 6.51m/min, and 0.18m/min for water, methyl alcohol, ethyl alcohol, and isopropyl alcohol, respectively, showing a remarkably slow migration of the particles in isopropyl alcohol