PURPOSES : The tire-pavement interaction noise (TPIN) comprises four sources, among which the tire tread vibration noise (TTVN) and air pumping noise (APN) are known to be the most influential. However, when evaluating TPIN, the noise level is estimated based on the overall noise, because general noise measurement methods cannot separate TTVN and APN. Therefore, this study aims to develop a method to separate TTVN and APN in TPIN for quantitative assessment of pavement noise. METHODS : Based on the results of our literature review and frequency band noise data measured in our study, we identified the dominant frequency ranges for TTVN and APN. Additionally, we evaluated TTVN and APN across various pavement types. RESULTS : TTVN was found to be dominant in frequency bands below 800 Hz, while APN was dominant in frequency bands above 800 Hz. Additionally, regardless of the vehicle type, vehicle speed, or pavement type, APN exhibited higher levels compared to TTVN. This result shows that APN has a more significant impact on TPIN than TTVN. CONCLUSIONS : The separation method of TTVN and APN proposed in this study can be utilized to quantitatively assess the relationship between the primary noise sources in TPIN and the characteristics of pavement texture in future research. Furthermore, it is anticipated that characteristics of low TPIN and optimal texture conditions can be proposed to mitigate TPIN, thus contributing to the development of lownoise pavements.

PURPOSES : This paper is aimed at suggesting a novel approach for determining the pavement condition rating based on the tire-surface friction noise using a machine learning algorithm as a low-end pavement condition monitoring system. METHODS : Vehicle on-board type noise measurement system according to the ISO11819-2, and the K-nearest neighbors with dynamic time warping algorithm were applied. The system and algorithm were empirically tested with a field study. RESULTS : The developed AI- and noise-based pavement condition monitoring system demonstrated significantly positive results with a precision 90.8%, recall 84.8%, and f1-score 86.1%. CONCLUSIONS: We herein confirmed that the acoustic property between the tire and road surface can be used for monitoring pavement conditions. It is believed this finding presented a new paradigm for monitoring pavement conditions based on visual information. However, extensive studies focused on the practical application of this method are required.

The object of this paper is to estimation of noise reduction effect of road noise by operating condition due to tire noise regulation. A prepare the countermeasure of the noise reduction according to collect tire/road noise data under various influencing factors by using the tire test method. To accomplish the object : A automotive is used as a test platform to test tire/road noise by changing different types of tires and using the On-Board Sound Intensity test system. The influence of inflation pressure, road, load, speed and pattern type on tire/road noise is compared and analyzed. At the same time, the mechanism of tire/road noise is analyzed, which provides an experimental basis for tire noise reduction.

By analyzing the status of Korean tire labeling regulation and comparing the performance indicators of tire labeling in different countries, this paper expounds the serious impact of tire noise on traffic noise pollution, and puts forward that in order to improve the comfort of car ride, control traffic noise pollution and build a green tire industry, the tire labeling system should be improved, and the corresponding requirements for tire rolling noise should be put forward according to the road conditions in Korea.

The study on the tire noise due to the On-Board Sound Intensity test method. The object of this project is to prepare the countermeasure of the noise reduction according to collect tire/road noise data under various influencing factors by using On-Board Sound Intensity test method. To accomplish the object ; A automotive is used as a test platform to test tire/road noise by changing different types of tires and using On-Board Sound Intensity test system. The influence of inflation pressure, road, load, speed and pattern type on tire/road noise is compared and analyzed. At the same time, the mechanism of tire/road noise is analyzed, which provides a experimental basis for tire noise reduction.

PURPOSES : Exposed aggregate concrete pavements have been adopted in several countries because of their advantages of pavement texture characteristics, which can produce low tire-pavement noise and higher load-carrying capacities. The magnitude of tire-pavement noise greatly depends on the wavelength of pavement texture. The wavelength of exposed aggregate concrete pavement can be controlled with maximum sizing and by controlling the amount of coarse aggregates in the concrete mixture. In this study, the maximum size and the amount of coarse aggregate in the exposed aggregate concrete pavement are investigated to produce equal levels of wavelength in the asphalt pavement. METHODS: A simple method to measure the average wavelength of pavement texture is introduced. Subsequently, the average wavelength of typical asphalt pavement is investigated. A set of mixture designs of exposed aggregate concrete with three maximum-sized coarse aggregates, and three amounts of coarse aggregate are used. The average wavelengths are measured to find the mixture design needed to produce equal levels of wavelength as typical asphalt pavement. RESULTS : With a cement content of 420 kg/m3 and fine aggregate modulus of 30%, the number of exposed aggregates was 48, and the shortest texture depth provided a wavelength of 4.2 mm. According to the number of exposed aggregates, the exposed aggregate concrete pavement could be rendered low-noise, because its wavelength was similar to that of asphalt pavement ranging from 3.9 to 4.4 mm. CONCLUSIONS : Selection of appropriate maximum sizes and the amount of coarse aggregates for exposed aggregate concrete pavement can produce a wavelength texture closely resembling that of asphalt pavement. Therefore, the noise level of exposed aggregate concrete pavement can be reduced with an appropriate maximum size and the amount of coarse aggregates are employed.

The tyre/road noise becomes aggravated due to the rapid increase of motor vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the tyre/road noise through grasping the status of the tyre/road noise. Traffic noise results from the collective contribution of the noise produced by individual motor vehicles. The tyre/road noise varies enormously depending upon its type and mode of operation. In this study, we investigate the noise labelling of EU tire.

The bending exercises of radial tire is one of the most important structural properties of the sidewall relating to ride and road noise of automobiles. The frequency band analysis is more useful for analyzing tire road noise due to property change of tread and sidewall. In this paper, the vertical stiffness and lateral stiffness of tire which have a various tread and sidewall is measured and the road noise is measured about same road condition. Furthermore, we investigated the effect on the structure of the tire tread and sidewall for the sound pressure level.

A deformation of tire structure cause characteristic change of tire as stiffness, ground surface shape, vibration and noise. As a result it will affect "riding quality" factors such as noise and vibration. In this study, figured it out the difference of tire pass by-noise according to ground pressure and stiffness change, to investigate the influence of tire characteristic for tire pass-by-noise. Therefore, The tire ground stiffness and tire pass-by-noise was measured according to pass-by-noise test method(ECE R117). Conclusively, “The tire pass by noise” was confirmed that between vibration and tread shoulder are a close relationship. As the tire shoulder vibration is low, “The acceleration pass-by-noise” can be seen that displayed lower value. In order to distribute contact pressure low for reduce the acceleration pass-by-noise, it could be confirmed that the shoulder stiffness should be greater.

PURPOSES : Recently, attempts have been made to evaluate tire-pavement noise based on a measure of Mean Profile Depth (MPD). However, equivalent values of MPD appear to correspond to different levels of tire-pavement noise, which indicates that other factors such as texture wavelength need to be included to improve the accuracy of noise prediction. A single index to represent texture wavelength is proposed in this study. A consistent relationship between tire-pavement noise and texture wavelength on asphalt concrete pavement is observed. METHODS: Profile data and tire-pavement noise data were collected from a number of expressway sections in Korea. In addition, texture wavelength was defined by a Peak Number (PN), which was calculated using profile data. Statistical analysis was performed to find the relationship between the PN and tire-pavement noise. RESULTS: As a result of this study, a linear relationship between PN and tire-pavement noise is observed on asphalt concrete pavement. CONCLUSIONS: Tire-pavement noise on asphalt concrete pavement can be predicted from PN information.

Among many potential problems associated with automobiles, the problem regarded as most sensitive and important to the customers is the automobile’s quietness. In particular, because the trend toward the high-performance automobiles is increasing, the quietness should be considered reflecting the increasing demand of the customers for the comfort of automobile ride. Road noise is the low-frequency range in the region of 20Hz to 350Hz, generated when the tires are making contacts with the rough road surface while the automobile is running, in which the noises are resonating within the passenger compartment or with the automobile suspension. In this research, among the factors related to the road noise, the influencing factors associated with the suspension and the tire design were investigated. In particular, among the tire design factors, the structure and the rubber material were investigated as the influencing factors, and for the investigative purpose, experimental tires were manufactured and road noise evaluations were conducted thorough actual feeling tests. Then the test results and correlations were analyzed using the 6-Sigma statistical method. Results from this study shows that, among the tire design factors, the apex is the most influencing factor, in which the height of the apex is the key. The influential factors were found out to be apex height, belt angle, and tread hardness, in that order, and when the suspension is of a same kind, the tendency of the road noise was found to be similar.

PURPOSES : The purpose of this study is to eliminate the noise of the vehicle after measuring the friction noise obtained from the NCPX (Noble Close ProXimity) method. The pure friction noise between the tire and road pavement could be determined from filtering the compositeness of sound and the influence of the vehicle noise. METHODS: The noise magnitude could be determined by analyzing the sound pressure level (SPL) and sound power level (PWL) along with the noise frequency of a FFT (Fast Fourier Transform) analysis as well as CPB (Constant Percentage Bandwidth) analysis. RESULTS: When the test for measuring the friction noise originated somewhere between tire and road pavement is performed with NCPX method, it must be fulfilled by attaching the surface microphone near the tire. In this condition, the surface microphone can measure the friction noise occurred at between tire and pavement, the chassis noise from the engine and power transfer units, the fluctuating aerodynamic noise, and the turbulence noise directly affected to the surface microphone. By using the NCPX method, the noise occurred at the vehicle must be eliminated for measuring the friction noise between tire and pavement from the traffic noise. CONCLUSIONS: The vehicle's testing engine noise depends on the vehicle and road types. The effect of vehicle's engine noise is less than the friction noise occurred at between tire and pavement at less than 1% effect.