Before the 15th century, the main buildings of the residences of the ruling class in Seoul consisted of Momchae(身梗), Seocheong(西廳), and Naeru(內樓)‧Chimru(寢樓). Based on the equality of the relationship between husband and wife, the couple lived in the main building[Momchae] in the center of the mansion, but based on the individuality of the relationship between husband and wife, each had an area consisting of the same section within the building. Naeru‧Chimru was the two floors bedroom building became a common living space for the minister and wife, upstairs in summer, downstairs in winter. In preparation for large gatherings and important receptions, an open-structured West Hall(西廳) was located on the west side of the mansion. Momchae, Seocheong, and Naeru‧Chimru were the common building types and layouts of the residences of the highest ruling class, including high-ranking officials, until the reign of King Sejong. However, from around the time of King Seongjong, Seocheong and Chimru came to be regarded as privileged and luxurious buildings only allowed for the grand prince's residence. The layout of the bedroom, main building (including Wings), Outer Sarang[外舍廊], and Joyangru[朝陽樓] of Prince Bongrim's mansion built in the first half of the 17th century clearly shows the transitional period when the arrangement of chimru, main building, and western office was disrupted and the layout changed to the Inner main building(Anchae for wife) and Outer main building(Sarangchae for husband).

PURPOSES : Recently, corrosion and deterioration of highway facilities have been increasing owing to the excessive use of deicers. This study aimed to find an optimal snow removal method to develop countermeasures for the problem of excessive deicer use and improve the efficiency of snow removal. METHODS : Theoretical investigations and experiments related to deicing were conducted to determine the differences between deicing chemical types and states. Based on regional weather patterns, the entire country was categorized into four groups: warm and heavy snow, warm and light snow, cold and heavy snow, and cold and light snow, and matched with each regional office of the Korea Expressway Corporation. RESULTS : Optimal snow removal methods were proposed considering regional characteristics and deicing chemical types and states. CONCLUSIONS : Different deicer types were proposed according to the region type, such as using only salt and salt/calcium chloride in the warm and cold regions, respectively. Second, plowing was more effective at lower temperatures. Third, liquid deicer spraying could reduce the amount of deicer used. A liquid deicer is suitable for preliminary spraying because its quick-acting properties are superior to those of a solid deicer, although its lasting properties are inferior to those of the solid deicer.

To functionally classify the types of gardens that can be used in a city, this study examined the perceived functions of gardens in Korea by reviewing the previous case studies, field surveys concerning gardens in cities, and interviews with stakeholders. First, the roles and effects of gardens identified in the earlier studies were clustered into similar concepts. To ensure validity, the types of functions of the gardens were named based on opinions gathered through meetings with experts. Field surveys were conducted on 31 cases studied over four years. The data obtained were applied to supplement the redefined classification criteria and items for gardens in the city as described above. The current status of the gardens was analyzed by type. The gardens were divided into four categories: socio-cultural, environmental, economic, and health-related. The sociocultural type was dominant among the community gardens in Korea. The results of this study may be used as a reference for the intended function of building an urban garden and to prepare guidelines for introducing socio-cultural, environmental, economic, and health-type gardens in the future.

호박꽃과실파리(Z. scutellata)는 박과작물에 피해를 주는 중요한 해충이다. 현재 큐루어(Cuelure)는 국내에서 검역 대상 해충으로 규정된 오이과실파리, 타우과실파리, 및 퀸슬랜드과실파리와 더불어 호박꽃과실파리 수컷 성충의 예찰에 다양한 제형으로 활용되고 있다. 본 연구는 액 체, 고체, 및 왁스제형의 큐루어에 대한 호박꽃과실파리 수컷 성충의 야외 유인효과를 검증하기 위한 것으로 2021년 4월부터 10월까지 제주 2개 지역과 경북 1개 조사에서 2주 간격으로 모니터링하였다. 호박꽃과실파리의 발생밀도가 높은 제주지역에서는 7월부터 8월에 액체와 왁스제형의 큐루어에 호박꽃과실파리가 더 많이 유인되어 통계적인 유의차가 있었으나, 호박꽃과실파리의 발생밀도가 낮은 경북지역에서는 제형별 유인력 에 차이가 없었다. 야외조사 결과를 바탕으로 액체와 왁스제형의 큐루어가 호박꽃과실파리 수컷 성충 예찰에 권장되며, 이 두 제형의 큐루어에 유 인되는 검역 대상 과실파리류의 국내 예찰에 효과적일 수 있다.

본 연구는 한국 여성의류소비자의 한국형아유르베다 성격유형과 의류 구매후기의 관계연구를 하는 것이 목적이며, 이러한 연구 목적을 위해 연구대상은 수도권 거주하는 20대 이상 설문 대상자 542명이었으며, 이 중 최종적으로 불성실한 응답을 제외한 519부를 본연구의 자료로 사용 하였다. SPSS 26프로그램을 통해 주요변수의 타당성, 신뢰성을 확보하 기 위하여 탐색적 요인분석, 인구학적 특성을 확인하기 위해 빈도분석, 성격유형에 따른 구매후기 점수의 차이를 확인하기 위해 세 집단 이상의 평균차이를 확인할 수 있는 일원배치분산분석(One-way ANOVA)을 실 시한 분석결과는 여성소비자의 한국형아유르베다 기본심리유형 중 하나 인 카파형(K)이 피타형(P)에 비해 구매후기를 중요하게 본다는 것을 알 수 있다. 이는 피타형(P)이 카파형(K)에 비해 구매후기를 중시하는 경향 이 낮은 이유는 자기주장이 강하고 주도적이며, 강한신념을 지니고 믿음 이 확고한 성격을 갖고 있는 것과 관계가 있음을 확인할 수 있다. 연령 을 구분하여 분석한 결과, 20~30대에서 유의한 차이가 나타났으며, 사후 검정 결과 피타형(P)의 평균보다 카파형(K)의 평균이 높은 것으로 확인되 었고 다중회귀분석을 통해서도 유사한 결과가 도출되었다. 이는 기성세 대에 비해 20~30대에서 구매후기를 중요시하는 경향은 모바일을 사용한 온라인, 디지털 환경에 익숙하기 때문이라 분석된다. 따라서 본 연구는 여성소비자의 성격유형과 구매결정후기 관계를 분석함으로써 마케팅 및 경영적 기초자료로 활용할 수 있을 것으로 사료된다.

The objective of this study was to explore how different types of rewards affect customers’ inclinations to engage in environmental activities promoted through restaurant social media platforms. In addition, we investigated the potential moderating role of customer level of participation within the social media community. A total of 202 valid responses obtained by distributing a self-administered survey among restaurant patrons were subjected to hierarchical regression analysis to examine relationships between variables. The findings underscored the significant influence of economic and social rewards on shaping customer intent to participate in environmental initiatives promoted within restaurant social media communities. Furthermore, the study revealed that the extent of customer participation within the social media community moderated the relationship between rewards and their likelihood to partake in environmentally conscious behaviors. These results have meaningful implications for restaurant managers seeking to promote environmental initiatives effectively through social media platforms and within their establishments.

본 연구는 자녀와의 상호작용에서 나타나는 부모의 피드백 특성을 에니어그 램 성격유형에 기반하여 살펴보고, 부모 스스로 자신의 피드백 특성을 파악하 고, 바람직한 피드백을 실행할 수 있도록 돕는 자료를 제공할 수 있는 척도를 개발하고 타당화하는 것을 목적으로 한다. 이를 위해 문헌조사 및 워크숍을 실시하여 에니어그램 성격유형별 부모의 피 드백 특성을 추출하고, 전문가 내용타당도 및 문항 분석을 통해 최종 107문항을 선정하였다. 선정된 문항의 신뢰도는 문항 내적 합치도를 통해 산출하였으며, 전체 Cronbach ɑ 계수는 .93, 각 유형별 .56∼.84로 나타났다. 또한, 개발된 척도 의 타당화는 비전에니어그램 성인용 척도(VETI-A)와의 공인타당도를 실행하 였으며, 집단별 교차타당도를 실행하여 검증하였다. 본 연구에서 개발된 에니어그램 성격유형에 기반한 부모의 피드백 척도는 부 모와 자녀의 상호작용에 있어 부모 자신의 피드백 특성을 파악하고, 심층적인 이해를 도모함으로써 긍정적이고 발전적인 피드백을 할 수 있도록 돕는 실질적 인 도구를 개발하고, 신뢰도와 타당도를 검증하였다는 점에서 의미가 있다.

The present study is designed to assess the ethical-moral effectiveness of three levels of AI implementations in the hospitality industry, which include mechanical AI for transactional services (automated service), thinking AI for functional services (algorithms search), and feeling AI for hedonic services (biometric sensors) when compared to consumers’ interactions with human. AI service robots are ethically challenging in use and morally controversial in its acceptance of labor replacement in hospitality contexts. In the hospitality industry, service robots have been rapidly adopted replacing frontline human services (Park et al., 2021). Service robots refer to “system-based autonomous and adaptable interfaces that interact, communicate and deliver service to an organization’s customers” (Wirtz et al., 2018, p.909). On the one hand, the applications of artificial intelligence (AI)-based service robots are promising in this field owing to remarkable accuracy in error reduction, portion control, and cost control in service operation and delivery (Berezina et al., 2019). However, on the other hand, there has been a debate on ethical and moral principles and values regarding service robots replacing human labor (Cowls et al., 2021). Nevertheless, restaurants’ adoption of service robots seems inevitable in the current marketplace as labor shortages and rising wages have challenged them to invest in automation (Tanzi, 2021). While prior research focused on the benefits of AI-based service offerings (e.g., Cristou et al., 2023; Huang & Rust, 2021; Park et al., 2021), this study explored the extent to which AI-based service robots are accepted by consumers without rising concern about service robots replacing human labors. To this end, we adopted Huang and Rust’s framework that identifies three levels of AI applications: mechanical, thinking, and feeling AIs. Mechanical AIs refer to the automation of repetitive and routine tasks (e.g., self-service technologies); thinking AIs facilitate rational decision-making based on data processing (e.g., conversational intelligent systems such as Siri); feeling AIs are able to interact with human emotions (e.g., humanlike robots that respond to human emotions such as Sophia). Further, we adopted the construal level theory (Trope & Liberman, 2003) to examine how different levels of AIs’ service capabilities influence the way that people think about AI-based service robots. In brief, this study demonstrated how different levels of AI benefits influence consumers’ moral concerns about AI-based service robotization’s replacement of human labor and social acceptance.

The present study compared the effectiveness of virtual influencers (VIs) to human influencers through the theoretical lens of the uncanny valley and parasocial relationship using an online experiment. Specifically, we posited that highly humanlike VIs may evoke the feeling of the uncanny valley, as compared to human influencers or cartoonlike influencers, which, in turn, would act as a psychological barrier to building a parasocial relationship with the specific type of virtual influencer and decrease advertising attitude. The results indicated that people do feel the uncanniness from both highly humanlike and cartoonish influencers as compared to human influencers. This particular psychological experience negatively influenced the parasocial relationship, which, in turn, negatively affected the attitude toward a social media advertisement featuring the VIs. However, importantly, this effect was moderated by individual differences in anthropomorphism. This is one of the first studies that directly compared the effectiveness of different types of social media influencers in a rigorously designed experimental setting and expands the previous research on Vis, uncanny valley, and parasocial relationship. Both theoretical and managerial contributions of the study were discussed.

Despite the importance of technology-based innovation and customer participation for both practitioners and academics, the impact of different customer participation types in new product innovation has rarely been addressed. Since consumers' positive assessment of new technologies leads to positive outcomes in the market, consumer evaluation of new technologies is important. Thus, examining the consumer perception of technology-based innovation including the different levels of customer participation is meaningful to new theoretical and practical insights.

Considering the popularity of virtual influencer (VI) marketing while its effectiveness remains fully unexplored, there is a need of academic attention testing consumer responses to VIs in comparison with human influencer marketing. Hence, this study aims to fill this gap by comparing consumers’ perceptions of a human versus virtual influencer’s endorsement. Specifically, based on the construal level theory and psychological reactance, this study investigates how consumers differently evaluate human and virtual influencers’ endorsement motives, which may further influence their attitudes toward a brand, advertising (i.e., endorsement), and an influencer and purchase intentions. Additionally, the moderating role of the number of endorsements (single vs. multiple) and perceived innovativeness are examined.

This study proposed a seismic reinforcement of RC columns with non-seismic details, a fiber reinforcement method of aramid sheets and MLCP (high elasticity aromatic polyester fiber material) with different characteristics, and 4 full-size column specimens and conducted experiments. The results show that a non-seismic specimen (RC-Orig) rapidly lost its load-bearing capacity after reaching the maximum load, and shear failure occurred. The RC column reinforced with three types of aramid did not show an apparent increase in strength compared to the unreinforced specimen but showed a ductile behavior supporting the load while receiving a lateral displacement at least 1.57 to 1.95 times higher than the unreinforced specimen. The fracture mode of the specimen, according to the application of lateral load, also changed from shear to ductile fracture through aramid-based reinforcement. In addition, when examining the energy dissipation ability of the reinforced specimens, a ductile behavior dissipating seismic energy performed 4 times greater and more stably than the existing specimens.

Neutron resonance transmission technique was applied for assaying isotopic fissile materials produced in the pyro-process. In each process of the pyro-process, a different composition of the fissile material is produced. Simulation was basically performed on 235U and 239Pu assay for TRU-RE product, hull waste, and uranium addition. The resonance energies were evaluated for uranium and plutonium in the simulation, and the linearity in the detection response was examined on the fissile content variation. The linear resonance energies were determined for the analysis of 235U and 239Pu on the different fissile materials. For enriched TRU-RE assay, the sample condition was suggested; The sample density, content, and thickness are the key factors to obtain accurate fissile content. The detection signal is discriminated for uranium and plutonium in neutron resonance technique. The transmitted signal for fissile resonance has a direct relation with the content of fissile. The simulation results indicated that the neutron resonance technique is promising to analyze 235U and 239Pu for various types of the pyro-process material. An accurate fissile assay will contribute toward safeguarding the pyro-processing system.

This paper investigates the effects of aspect ratio and volume fraction of hooked-end normal-strength steel fibers on the compressive and flexural properties of high-strength concrete with specified compressive strength of 60 MPa. Three types of hooked-end steel fibers with aspect ratios of 64, 67 and 80 were considered and three volume fractions of 0.25%, 0.50% and 0.75% for each steel fiber were respectively added into each high-strength concrete mixture. The test results indicated that the addition of normal-strength steel fibers is effective to improve compressive and flexural properties of high-strength concrete but fiber aspect ratio had little effect on the modulus of elasticity and compressive strength. As steel fiber content and aspect ratio increased, flexural beahvior of notched high-strength concrete beams was effectively improved.

In this study, a bipolar visible light responsive photocatalytic fuel cell (PFC) was constructed by loading a Z-scheme g-C3N4/ carbon black/BiOBr and a Ti3C2/ MoS2 Schottky heterojunction on the carbon brush to prepare the photoanode and photocathode, respectively. It greatly improved the electron transfer and achieved efficient degradation of organic pollutants such as antibiotics and dyes simultaneously in two chambers of the PFC system. The Z-scheme g-C3N4/carbon black/BiOBr formed by adding highly conductive carbon black to g-C3N4/BiOBr not only effectively separates the photogenerated carriers, but also simultaneously retains the high reduction of the conduction band of g-C3N4 and the high oxidation of the valence band of BiOBr, improving the photocatalytic performance. The exceptional performance of Ti3C2/ MoS2 Schottky heterojunction originated from the superior electrical conductivity of Ti3C2 MXene, which facilitated the separation of photogenerated electron–hole pairs. Meanwhile, the synergistic effect of the two photoelectrodes further improved the photocatalytic performance of the PFC system, with degradation rates of 90.9% and 99.9% for 50 mg L− 1 tetracycline hydrochloride (TCH) and 50 mg L− 1 rhodamine-B (RhB), respectively, within 180 min. In addition, it was found that the PFC also exhibited excellent pollutant degradation rates under dark conditions (79.7%, TCH and 97.9%, RhB). This novel pollutant degradation system is expected to provide a new idea for efficient degradation of multiple pollutant simultaneously even in the dark.

Kori unit 1, the first PWR (Pressurized Water Reactor) in Korea, was permanent shut down in 2017. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. Solid radioactive waste depending on the characteristics of the generation was classified into reactor vessel and reactor vessel internal, large components, small metals, spent nuclear fuel storage racks, insulation, wires, concrete debris, scattering concrete, asbestos, mixed waste, soil, spent resins and filters, and dry active waste. Radiological characterization of solid radioactive waste is performed to determine the characteristics of radioactive contamination, including the type and concentration of radionuclides. It is necessary to ensure the representativeness of the sample for the structures, systems and components to be evaluated and to apply appropriate evaluation methods and procedures according to the structure, material and type of contamination. Therefore, the radiological characterization is divided into concrete and structures, systems and components, and reactor vessel, reactor vessel internal and bioshield concrete. In this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. The results of this study can be used as a basis for the preparation of the FDP for the Kori unit 1.

The nuclear power plant decommissioning project inevitably considers time, cost, safety, document, etc. as major management areas according to the PMBOK technique. Among them, document management, like all projects, will be an area that must be systematically managed for the purpose of information delivery and record maintenance. In Korea, where there is no experience in the decommissioning project yet, data management is systematically managed and maintained during construction and operation. However, if the decommissioning project is to be launched soon, it is necessary to prepare in consideration of the system in operation, what difference will occur from it in terms of data management, and how it should be managed. As a document that can occur in the decommissioning project, this study was considered from the perspective of the licensee. Therefore, the types of documents that can be considered at Level 1 can be divided into (1) corresponding documents, (2) project documents, (3) internal documents, and (4) reference materials. Four document types are recommended based on Level 1 for the classification of documents to be managed in the decommissioning of nuclear facilities. In this study, documents to be managed in the decommissioning project of nuclear facilities were reviewed and the type was to be derived. Although it was preliminary, it was largely classified into major categories 1, middle categories 2, and 3 levels, and documents that could occur in each field were proposed. As a result, it could be largely classified into corresponding documents, project documents, internal documents, and reference materials, and subsequent classifications could be derived. Documents that may occur in the decommissioning project must be managed by distinguishing between types to reduce the time for duplication or search, and the capacity of the storage can be efficiently managed. Therefore, it is hoped that the document types considered in this study will be used as reference materials for the decommissioning project and develop into a more systematic structure.

The licensee of nuclear facilities in the Republic of Korea should ensure the functionality of Critical Digital Assets (CDAs) is maintained and minimize the negative impact of cyber-attacks by establishing a cyber security contingency plan. The contingency plan should include detailed response guidelines for each stage of detection, analysis, isolation, eradication, and recovery and comply with the requirements specified in KINAC’s “Regulatory Standard 015 - Security for Computer and Information System of Nuclear Facilities”. However, since the cyber security contingency plan describes the overall response guidelines for CDA, it may be difficult to respond practically to cyberattacks. This paper suggests a method to address this issue by performing exercises based on the classification of CDA types. CDAs in nuclear facilities can be classified according to their characteristics. The criteria for classifying CDA types include whether the asset is a PC, whether communication ports (RS-232, 422, 485) exist, whether storage devices can be connected through USB/memory card ports and whether internal settings can be changed through HMI devices such as built-in buttons. By classifying CDA types based on the proposed criteria, the attack vectors of CDAs can be defined. By defining the attack vectors, a list of cyber-attacks that CDAs may face can be created, and abnormal symptoms of CDAs resulting from the listed cyber-attacks can be defined. By using the defined abnormal symptoms of CDAs, the response measures of detection, analysis, isolation, eradication, and recovery can be concretized and reflected in the contingency plan. This may enable a more practical emergency response. This paper presents an improvement to the cyber security emergency response plan through the definition of cyber-attacks based on the classification of CDA types. By improving the contingency plan for CDAs as a whole using the proposed method, it is expected that more effective response measures can be taken in the event of a cyber-attack.

The labor environment in Korea has changed and problems related to employment types are treated as important issues. Especially, the ratio of irregular workers has not only increased relatively, but the labor conditions in Korea also have worsened in the current years. Studies have reported an association between temporary workers and the prevalence of diseases. However, there is insufficient research on chronic disease and employment types. Methods: The current study examines the prevalence rate of diseases and health behavior by categorizing employment types among Korean adults. Data were obtained from the 2016-2018 Korea National Health and Nutrition Examination Survey. Totally, the data of 2,366 workers (1,239 regular and 1,127 irregular) were analyzed in the study. The types of employment were classified by a questionnaire querying about working conditions. The results showed that irregular workers earned less than regular workers and had a significantly higher prevalence of diabetes mellitus and hypertension. We propose that if discrimination related to working conditions were relieved, irregular workers would be able to invest more time to exercise and doing check-ups regularly. In addition, individual nutrition consultations considering the knowledge and personal environmental factors of each individual are necessary for the improved health of all workers.