In the present study, an innovative electrochemical sensing platform was established for sensitive detection of NO2 —. This sensor was developed using CoFe alloy encapsulated in nitrogen-doped carbon nanocubes (named as CoFe@NC-NCS), synthesized through the calcination of polydopamine-coated CoFe Prussian-blue analogues (CoFe-PBA@PDA). The morphological and electrochemical characterization reveals that the CoFe@NC-NCS possesses high electrocatalytic activity for electrochemical quantitation of NO2 —, ascribed to the huge surface area and plentiful active positions, benefiting from the porous, hollow, and core–shell structure of CoFe@NC-NCS. Under the optimal conditions, CoFe@NC-NCS/GCE possessed remarkable sensing performance for NO2 — with wide liner ranges and a detection limit of 0.015 μM. NO2 — recovery experiments in real samples exhibited recoveries in the range of 98.8–103.5%. Hence, the CoFe@NC-NCS shows great promise for the construction of electrochemical sensor with more potential application.

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm− 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.

Natural enemy insects, including predators and parasitoids, are beneficial organisms that feed upon other agricultural pests. Using natural enemy insects to suppress or prevent outbreak of pests is a key component of integrated pest management strategy. It is safe, effective, and environmentally friendly and can be applied easily to the greenhouses, filed crops and orchards. Rearing and application of natural enemy insects in biocontrol in China have a long history. As early as 1700 years ago, the predator Oecophylla smaragdina has been used for controlling many kinds of citrus pests. Up to now, more than 30 species of natural enemies that can be artificially mass produced and widely used for biological control of many kinds of pests, including caterpillars, aphids, whiteflies, thrips, leaf mites and scales in China. The annual average application area of natural enemies is over 11.34 million hectares. However, with the increasing demand of using natural enemies in biological control programs, the development of natural enemy insect industrialization still face many challenges. It is urgent to explore more effective candidate natural enemies, improve the production efficiency, increase the shelf life of products and enhance the colonization of natural enemy insects after release, and thus facilitate the commercially production and application of natural enemies. This is of great significance for comprehensively promoting the use of green prevention and control techniques for crop diseases and pests, reducing the use of chemical pesticides, ensuing the quality and safety of food and agricultural products, and ultimately promoting sustainable agricultural development.

This paper tests firms’ strategic response to negative consumer sentiment. We use sentiment analysis on social media posts to detect and proxy for negative consumer sentiments toward the firms and operationalize the number of ESG positive news about the firms as the strategic response to the sentiment. We document a surprising phenomenon that negative sentiment toward a firm is positively associated with future ESG news announcements by the firm. The effect is stronger for B2B firms than for B2C ones. We argue this is the firm’s strategic reaction rather than being a true change in the firm’s ESG policy, because (1) The ESG effect only lasts for a short period, and (2) the negative sentiment toward the firm decreases after the ESG news. Using former US president Trump’s tweets as external shocks, we show the causal relationship in a DID framework.

In this study, a bipolar visible light responsive photocatalytic fuel cell (PFC) was constructed by loading a Z-scheme g-C3N4/ carbon black/BiOBr and a Ti3C2/ MoS2 Schottky heterojunction on the carbon brush to prepare the photoanode and photocathode, respectively. It greatly improved the electron transfer and achieved efficient degradation of organic pollutants such as antibiotics and dyes simultaneously in two chambers of the PFC system. The Z-scheme g-C3N4/carbon black/BiOBr formed by adding highly conductive carbon black to g-C3N4/BiOBr not only effectively separates the photogenerated carriers, but also simultaneously retains the high reduction of the conduction band of g-C3N4 and the high oxidation of the valence band of BiOBr, improving the photocatalytic performance. The exceptional performance of Ti3C2/ MoS2 Schottky heterojunction originated from the superior electrical conductivity of Ti3C2 MXene, which facilitated the separation of photogenerated electron–hole pairs. Meanwhile, the synergistic effect of the two photoelectrodes further improved the photocatalytic performance of the PFC system, with degradation rates of 90.9% and 99.9% for 50 mg L− 1 tetracycline hydrochloride (TCH) and 50 mg L− 1 rhodamine-B (RhB), respectively, within 180 min. In addition, it was found that the PFC also exhibited excellent pollutant degradation rates under dark conditions (79.7%, TCH and 97.9%, RhB). This novel pollutant degradation system is expected to provide a new idea for efficient degradation of multiple pollutant simultaneously even in the dark.

One-step hydrothermal reduction method was used to prepare three-dimensional carbon fiber brush-based graphene–platinum (CFB/Pt–G) composites to improve the electrocatalytic oxygen reduction activity of cathode materials for seawater oxygen-dissolved battery. Characterization results show that the reduced graphene oxide of as-prepared graphene–platinum composite displays the few-layer folded structure. In addition, Pt nanoparticles with the polycrystalline structure dispplay a preferential growth along the crystal plane of (111) and are mainly distributed around the defect cavities of folded graphene. Electrochemical results show that the diffusion-limited current density of CFB/Pt–G composite tested with 1600 rpm/min in 3.5% NaCl solution reaches 5 mA/cm2, while that of CFB/G is only 2.64 mA/cm2. Battery discharge results show that the maximum volume power density of CFB/Pt–G–Mg battery with a stable open voltage of 1.73 V is 81 times as much as the commercial seawater battery SWB1200.

High-performance carbon materials were prepared via a one-step molten salt carbonization of tobacco waste used as electrode materials for supercapacitors. Carbon material prepared by carbonization for 3 h in molten CaCl2 at 850 °C exhibits hierarchically porous structure and ideal capacitive behavior. In a three-electrode configuration with 1 mol L− 1 H2SO4 aqueous solution, it delivers specific capacitance of 196.5 F g− 1 at 0.2 A g− 1, energy density of 27.2 Wh kg− 1 at 0.2 A g− 1, power density of 983.5 W kg− 1 at 2 A g− 1, and excellent cyclic stability with 94% capacitance retention after 5000 charge–discharge cycles at 1 A g− 1. Moreover, in a symmetrical two-electrode configuration with 6 mol L− 1 KOH aqueous solution, it delivers specific capacitance of 111.1 F g− 1 at 0.2 A g− 1, energy density of 3.8 Wh kg− 1 at 0.2 A g− 1, and power density of 482.0 W kg− 1 at 2 A g− 1. The relationship between hierarchically porous structure and capacitive performance is also discussed.

Porous mullite-corundum ceramics were prepared using organic foam impregnation method with alumina and silica as raw materials. The influence of alkaline treatment and surfactant modification on polyurethane foam were studied. Effects of sintering process and material composition on porous mullite-corundum ceramics were investigated. The results show that the hang-pulp quantity of polyurethane foam increases with alkaline treatment. After treatment with 3 wt% SDS solution, the hang-pulp quantity of polyurethane foam further improved. Open porosity of sample decreased with elevation of sintering temperature and holding time, and compressive strength of sample showed a trend opposite to the change of porosity. The open porosity of the sample was enhanced by the increase of m(Al2O3/SiO2); the compressive strength decreased with increase of m(Al2O3/SiO2). However, when m(Al2O3/SiO2) was 2.5, the compressive strength of the sample reached 6.23 MPa, and the open porosity of the sample was 80.7 %.

In this study, nitric acid oxidation with varied treatment temperature and time was conducted on the surfaces of polyacrylonitrile- based ultrahigh modulus carbon fibers. Scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and surface tension/dynamic contact angle instruments were used to investigate changes in surface topography and chemical functionality before and after surface treatment. Results showed that the nitric acid oxidation of ultrahigh modulus carbon fibers resulted in decreases in the values of the crystallite thickness Lc and graphitization degree. Meanwhile, increased treating temperature and time made the decreases more obviously. The surfaces of ultrahigh modulus carbon fibers became much more activity and functionality after surface oxidation, e.g., the total surface energy of oxidized samples at 80 °C for 1 h increased by 27.7% compared with untreated fibers. Effects of surface nitric acid oxidation on the mechanical properties of ultrahigh modulus carbon fibers and its reinforced epoxy composites were also researched. Significant decreases happened to the tensile modulus of fibers due to decreased Lc value after the nitric acid oxidation. However, surface treatment had little effect on the tensile strength even as the treating temperature and processing time increased. The highest interfacial shear strength of ultrahigh modulus carbon fibers/epoxy composites increased by 25.7% after the nitric acid oxidation. In the final, surface oxidative mechanism of ultrahigh modulus carbon fibers in the nitric acid oxidation was studied. Different trends of the tensile strength and tensile modulus of fibers in the nitric acid oxidation resulted from the typical skin–core structure.

21세기 초부터 중국의 해외관광산업이 많이 활발해졌고, 운남성도 이러한 배경 하에 주변국가와 관광산업분야에서 협력의 폭과 깊이를 넓힐 수 있었다. 중국-미얀마 경제회랑은 중국이 설립 된 두 번째 무역회랑이며 이는 란창-메콩 지역발전에 중요한 역할을 하고 있다. 학술계는 운남 및 미얀마 양측의 관광산업을 중심으로 한 협력이 더욱더 활성화 될 거라고 전망하고 있다. 본 논문은 중국-미얀마 경제 회랑 건설을 기반으로 중국 Dehong지역과 미얀마 간의 관광산업협력 현황 및 협력 메커니즘, 인프라 구축, 국경 간 관광 상품 개발 및 관광 서비스 등을 분석하였고, 또한 Dehong과 미얀마 간 관광 협력에 적합한 친환경적인 협력모델을 탐색하였다.

Energy and environmental are always two major challenges for the sustainable development of the modern human being. For avoiding the serious environmental pollution caused in the fabrication process of porous carbon, a popular energy storage material, we reported a facile, green and activating agent free route hereby directly carbonizing a special biomass, Glebionis coronaria. A nitrogen doped hierarchical porous carbon with a specific surface area of up to 1007 m2 g−1 and a N doping content of up to 2.65 at.% was facilely fabricated by employing the above route. Benefiting from the peculiarly hierarchical porous morphology, enhanced wettability and improved conductivity, the obtained material exhibits superior capacitance performance, which capacitance reaches up to 205 F g−1 under two-electrode configuration, and no capacitance loss is observed after 5000 cycles. Meanwhile, the capacitance retention of the obtained material arrives up to 95.0% even under a high current density of 20 A g−1, illuminating its excellent rate capability. The fabricated nitrogen-doped hierarchical porous carbon with larger capacitance than commercial activated carbon, excellent rate capability and cycle stability is an ideal cost-efficient substitution of commercial activated carbon for supercapacitor application.

The KVN(Korean VLBI Network)-style simultaneous multi-frequency receiving mode is demonstrated to be promising for mm-VLBI observations. Recently, other Very long baseline interferometry (VLBI) facilities all over the globe start to implement compatible optics systems. Simultaneous dual/multi-frequency VLBI observations at mm wavelengths with international baselines are thus possible. In this paper, we present the results from the first successful simultaneous 22/43 GHz dualfrequency observation with KaVA(KVN and VERA array), including images and astrometric results. Our analysis shows that the newly implemented simultaneous receiving system has brought a significant extension of the coherence time of the 43 GHz visibility phases along the international baselines. The astrometric results obtained with KaVA are consistent with those obtained with the independent analysis of the KVN data. Our results thus confirm the good performance of the simultaneous receiving systems for the non-KVN stations. Future simultaneous observations with more global stations bring even higher sensitivity and micro-arcsecond level astrometric measurements of the targets.

The current scale of the import trade of the US with China is significant and has the potential to be more in near future. However, patent-based disputes, especially in terms of Section 337 investigation, have also been increased in recent years. In the context of parallel development of national innovation strategies of China’s “Made in China 2025 Plan” and the American “Advanced Manufacturing Partnership,” along with the latest expanded “Information Technology Agreement” in the WTO trading system, the implications for optimally resolving patent-based disputes in the US import trade with China is highly significant for two countries. These disputes may even impact the world trade, since bilateral trade between China and the US accounts for a considerable proportion. Thus, both China and the US should take precautions and appropriate measures to guard against such potential frictions in order to attain mutually beneficial outcomes in resolving such disputes.

This study researched the population of ecological characteristics of the goldeyes rockfish Sebasetes thompsoni sampled by gill net in the Ulleungdo area from February 2013 to February 2014 in order to assess the current stock status and provide scientific advice for management implementation. The instantaneous coefficient of total mortality (Z) was 0.78/year and the survival rate (S) was 0.459. The instantaneous coefficient of natural mortality (M) was 0.461/year. Based on the estimates of Z and M, the instantaneous coefficient of fishing mortality (F) was 0.318/year. The age at first capture (tc) was 4.41/years. Current Yield-per-recruit (YPR) was 30.83 g, and fishing mortality at maximum YPR (Fmax) and fishing mortality corresponding to 10% of the maximum slope in YPR curve (F0.1) were 3.257/year and 0.673/year, respectively. F35% and F40%, indicating fishing mortalities at 35% and 40% of maximum Spawning biomass-per-recruit (SBPR), were 0.619/year and 0.509/year, respectively. Based on the biological reference points, fishing mortality at overfished threshold yield (FOTY) was calculated as 0.509/year. Current SBPR/SBPRMSY was 1.313 above 1.0, which means ‘not overfishe,’ while current F/FOTY was 0.629 below 1.0, which indicates ‘not overfishing.’ In conclusion, the current status of goldeyes rockfish was located in green zone (i.e., not overfished and not overfishing) according to the revised Kobe plot.