In this study, theoretical analyses are performed to investigate the characteristics of the static and dynamic stiffness of a nonlinear vibration isolator system. The vibration isolator system is modeled as an equivalent nonlinear oscillator. Based on the model, the static equilibrium and frequency response solutions are obtained with the variations of external static load and/or system parameters. It is shown that the static stiffness of the nonlinear vibration isolator tends to be hardened with the increase of external static load, which prevents the occurrence of excessively large deflection. This static stiffness-hardening effect is more remarkable with a larger spring constant ratio. The dynamic stiffness is also strengthened when the spring constant ratio increases, which enlarges the force transmissibility and reduces the isolation frequency bandwidth. Thus, the static stiffness- hardening improves the robustness of the nonlinear vibration isolator, whereas the dynamic stiffness-hardening rather degrades its performance. Thus, the opposite tendency of the static and dynamic stiffness-hardening effects should be considered in the design process of the nonlinear vibration isolator.

Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.

선박, 잠수함이 추진하면 수중구조물 후류에 와류가 발생하고 이에 따른 와류기인 구조진동이 유발된다. 최근 선박, 잠수함의 고속화 및 대형화 추세에 따라 고차모드에서 유발되는 와류기인 진동 및 피로파괴에 대한 중요성이 강조되고 있다. 고속 유속환경의 와 류는 저속 유속환경 대비 큰 진동을 유발하므로 이에 관한 연구가 필요하다. 본 연구에서는 수중날개 고차모드에서 유발되는 와류기인 진동을 예측하기 위한 하이브리드 유체구조연성 해석 방법론을 제시하였다. 고차모드를 고려한 하이브리드 유체구조연성 해석을 수행하 여 와류기인 진동을 도출하고 실험결과와 비교함으로써 방법론을 검증하였다. 최종적으로 와류기인 진동으로부터 도출된 최대 von Mises 응력을 노르웨이 선급에서 제시한 S-N 선도에 적용함으로써 고차모드 유체구조연성 해석의 효용성을 확인하였다. 고차모드를 고려하여 와류기인 진동응답을 도출할 경우 유체구조연성에 의한 락인(Lock-in) 특성을 확인하였으며 고려하지 않은 경우 대비 진동응답과 최대 von Mises 응력에서 10배 이상의 차이를 보였다. 향후에는 외팔보 경계조건 및 형상에 대한 확장연구가 필요하다.

최근 유기농산물에 대한 선호가 증가하고 있다. 유기농산물 생산에 있어 물리적 제초는 필수적이다. 하지만, 국내 밭 제초작업 기계화율은 60% 미만으로 낮으며, 농촌 인구의 고령화·여성화로 소형 제초기의 개발이 필요하다. 또한, 제초기의 경우 사용자가 반복적 진동에 노출되기 때문에 이를 절감할 수 있는 노력이 필요하나, 이에 대한 연구는 미흡한 실정이다. 따라서, 본 연구에서는 여성·고령 농업인도 사용하기 편리한 전동 배부식 중경제초기를 개발하는 데 있어 수평 회전식 원판에 부착된 제초날의 형상(원형, 삼각형, 일자형) 및 폭(15, 20, 25mm)에 따른 제초성능 및 ISO5349-1에 따라 손에 전달되는 진동을 분석하였다. 제초율은 원형 제초날에서 90.4~96.4%로 가장 높게 나타났으며, 진동 또한 원형 제초날을 사용하였을 때 사용자의 10%가 수지백증이 발병하는데 걸리는 시간이 20년 내외로 삼각형 및 일자형 제초날을 사용했을 때 보다 200% 가량 증가하는 것으로 나타났다. 따라서, 원형 제초날을 사용하였을 때 진동을 감소시킬 수 있으며, 불필요한 반력을 줄여 높은 제초효과를 볼 수 있을 것으로 판단된다.

Most of speakers, the con-paper (con shape) or vibration plate generate the sound by reciprocating motion which is received vibrating signal from voice coil. On the other hand, the vibration speaker that reproduces sound by attaching a vibration head to some materials such as wood, plastic, glass plate, etc. instead of cone paper or vibration plate generates different sound timbres depending on the attached materials with vibration head. so we can hear a variety of timbres than ordinary speakers. In this study, the characteristics of vibration and sound propagation according to various materials attached to the vibration head of the vibration speaker were experimentally investigated and this sound propagation characteristics were compare with woofer speaker and micro speaker. As a result of sound propagation characteristics of vibration speaker, the reproduction ability of low frequency band wes inferior to compared than woofer speaker and micro speaker. This is judged to be due to the material characteristics of glass and wood which are source of the sound propagation. As compare with 1kHz sine tone, the woofer speaker has not generated the high order harmonic component, but the glass plate and wood plate used with the vibration speaker head have generated the high order harmonic component at a level that can not be ignored. According to above results, the vibration speaker will be had a low articulation of sound because the higher volume to generate the high distortion.

본 연구에서는 목탑 상륜부 구조물의 진동 특이성을 분석하였다. 목탑 상륜부 구조물은 공예가들에 의해서 만들어지기 때문 에 공학적인 판단을 받지 않고 설치되어 불안정한 상황이 발생될 수 있다. 최초에 설계된 평화의 탑 상륜부는 전체 높이 7,720mm 중 에서 약 2/3높이에 해당하는 5,150mm까지는 스테인레스 스틸을 사용하고 나머지 2,570mm는 황동으로 설계되어 제작 의뢰되었다. 최 초 설계안에 대해 진동해석을 수행하고 모드별 유효질량을 산출한 결과 2차모드의 유효질량이 1차모드의 유효질량보다 크게 산출되 었다. 이런 현상의 개선을 위해 황동 부분을 스테인레스로 변경하여 2차 설계안이 준비되었고 2차 안에 대한 진동해석을 수행한 결과 1차모드가 지배적인 모드로 전환되었다. 본 연구의 결과로, 2차모드의 유효질량이 1차모드의 유효질량보다 큰 것이 전단력 미친 영향 의 정도를 정확하게 판단하기는 어렵다. 이 부분에 대해 추후 연구가 진행되어야 정확한 언급이 가능할 것으로 판단된다.

High-performance vehicles with V6 or higher are designed with a dual exhaust system to satisfy both performance and quietness at the same time, and have a confluence geometry for the purpose of stably maintaining the back pressure inside the pipe. The exhaust system generates noise and vibration under the influence of the rotating engine. In particular, in a state such as idling, vibration occurs in a certain frequency range, which may affect the natural vibration of the exhaust system. Therefore, in this study, the optimal shape is proposed by comparing the ignition frequency calculated based on the vibration measurement result in the idle state and the numerical analysis result.

본 연구에서는 중앙 개구부를 갖는 카본나노튜브/유리섬유/폴리머 합성 복합 적층쉘을 다루었다. 수정된 Halpin-Tsai 모델과 마이크로 역학적 접근방법은 단일벽 탄소나노튜브의 합성 비율에 따른 탄성적 물성변화를 추정하기 위하여 적용되었다. 유한요소 해석을 통하여 쉘의 고유진동 및 모드 특성을 분석하였다. 탄소나노튜브의 무게 비율, 보강섬유 각도, 개구부 크기, 고 유진동수 및 고유모드의 상관관계를 규명하였다. 개구부를 갖는 경우와 갖지 않는 경우에 대하여 곡률 변화에 따른 기존 문헌 과의 비교를 통하여 본 연구결과를 검증하였다. 본 연구결과는 고유진동 특성에 영향을 미치는 탄소나노튜브 보강의 중요성을 보여준다.

The study conducted finite element analysis in advance to understand the natural frequency, con-ducted static structural analysis and analyzed stress behavior occurring on the boundary of wheel and rail when passing the straight line and curve line. According to the FEA, the wheel had natural frequency of 1st mode 238.4Hz to 10th mode 1,320Hz, and the rail had natural frequency of 457.4Hz to 619.7Hz. When looking at the correlated frequency range, the natural frequency of 4th~6th mode of wheel and 3rd~9th mode of rail track were correlated. As for the result of stress behavior translation occurring on the boundary of wheel and track, it was 53.4MPa when passing the curve line, which was 16MPa higher than when passing the straight line.

Yangjindang house, which is located in Sang-ju province of South Korea, is one of the special Hanok structures dated back to Joseon dynasty. This study aims to examine structural safety of the Yangjindang wood frame building considering dynamic parameters such as the natural frequency and damping ratio. The numerical model of the wood frame building is implemented using Midas Gen, especially the wood joint where column and beam were connected. The behavior of the actual frame building was compared with the modeling results. In addition, structure responses such as shear force, axial force, flexural moment and deflections were calculated and compared with the allowable limits. Numerical results show that, generally, despite of some local members shear failure, Yangjindang’s structural response does not exceed the limitation according to current standards.

The purpose of this study is to determine the effects of vibration on primary (e.g. plasma cortisol), secondary (e.g. plasma glucose, aspartate aminotransferase (AST), alanine aminotransferase (ALT), Na+, K+ and Cl- and tertiary (e.g. mortality) stress responses in cultured eel, Anguilla japonica. For this purpose, three groups (including one control group and two stress groups) were set up. The control group was made exposed to vibration corresponding to 48 decibel (dB, V) (produced using electric vibrators) for 15 minutes per hour every day, and the two stress groups was made exposed to vibration corresponding to 58 and 68 dB (V) (produced using the same electric vibrators), equally, for 15 minutes per hour every day. Blood was sampled at day 0 (before starting vibration stress tests, BS), and days 1, 3, 5, 7, 9 and 11 (after starting vibration stress tests). As a result, plasma cortisol showed trend to continuously rise by consecutive stress from 4.1±0.1 ng/ml in BS. In 48 dB group (control), cortisol showed the highest level with 7.6±0.9 ng/ml after 7 days (p <0.05), but at 9 and 11 days was not significantly compared with BS level. In 58 dB group, the cortisol showed the highest level with 43.1±4.8 ng/ml after 1st day. Cortisol of 68 dB group increased significantly during the experimental period (14.4±2.3~32.0± 5.7 ng/ml) (p<0.05). In 58, and 68 dB groups during the experimental period differed significantly compared to 48 group (p <0.05). Glucose in 48 dB were increased from 42.0 ±5.7 (BS) to 52.5±2.1 (1 day), the level was not significantly from 1 to 11 days. Glucose in 58 and 68 dB groups was increased significantly than BS during experimental period (p <0.05). K+ in 68 dB increased significantly (p <0.05) from 2.3±0.2 mE/ql (BS) to 3.3± 0.5 mE/ql at 5 days. In 48 and 58 dB groups during the experimental period differed significantly (p <0.05). Na+ and Cl- levels were not differed significantly during the experimental period. AST and ALT in 58 and 68 dB groups showed trend to continuously rise by consecutive stress. At 7 and 9 days in AST, between 48, 58 and 68 dB groups differed significantly (p <0.05). In 48, 58 and 68 dB groups at 1 day, blood hematocrit increased significantly higher than BS. The 11 days after vibration stress, the mortality in 48, 58 and 68 dB groups was 1.1, 5.1 and 5.8%, respectively. The present results have shown that A. japonica exhibited ''typical'' physiological responses when exposed to chronic vibration stress. These data suggested that chronic vibration stress caused substantial stress in the fish; especially the persisting elevated plasma AST and ALT levels observed would be expected to adverse effect. In conclusion, chronic vibration stress could greatly affects the hematological characteristics in A. japonica.